プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Tollkit Crypto

作者:UltraStarzバージョン 0.1.0i★ –iクラウドで動く
レジストリ名io.github.UltraStarz/tollkit-crypto

インストール

概要

作者による説明(英語の原文)

Crypto news, perps, market pulse, price history and token checks for AI agents. USDC per call.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: 暗号資産・ブロックチェーン

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://api.tollkit.dev/mcp/crypto

ターミナルでこれを実行します

claude mcp add --transport http tollkit-crypto https://api.tollkit.dev/mcp/crypto

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "tollkit-crypto": {
      "url": "https://api.tollkit.dev/mcp/crypto"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "tollkit-crypto": {
      "type": "http",
      "url": "https://api.tollkit.dev/mcp/crypto"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://api.tollkit.dev/mcp/crypto

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月7日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • check_my_balance

    Free. Check how much USDC is left in your own wallet on Base, so you can tell your human before you run out. Returns the balance and whether it's below your threshold. Read-only: it moves nothing. Tollkit never holds anyone's funds or keys. When to use: You pay for tools from a w

  • wallet_balance

    Check a wallet's balances on Base, Ethereum or Solana: native ETH or SOL, USDC (plus USDT on Ethereum and Solana), and any token contracts or SPL mints you list (up to 20), with symbols and decimals applied. Read live from the chain. $0.002 USDC per call over x402. Failed calls c

  • token_info

    Look up a token on Base, Ethereum (ERC-20 contract) or Solana (SPL mint): name, symbol, decimals and total supply, plus mint and freeze authority on Solana, read live from the chain. Use it to confirm what an address actually is before acting on it. $0.002 USDC per call over x402

  • transaction_lookup

    Look up a transaction on Base, Ethereum or Solana: did it succeed, when, who sent it, the fee, and every token movement with symbols and amounts (ERC-20 transfers; on Solana, SOL and token balance changes per owner). Use it to confirm a payment actually landed. $0.002 USDC per ca

  • token_price

    Get a token's current USD price on Base, Ethereum or Solana, read from its deepest on-chain pool (Uniswap v3 against USDC or WETH; on Solana, Orca Whirlpools against USDC or SOL) rather than a price API. Returns the pool used, how much liquidity backs the price, and a flag when t

  • token_check

    Check a token before buying, sending or accepting it, on Base, Ethereum or Solana: what it is, its USD price and liquidity, and plain warnings read from the chain (no pool, thin liquidity; on Base and Ethereum the contract's owner and whether it is upgradeable or can mint, pause,

  • wallet_portfolio

    Value a wallet in USD on Base, Ethereum or Solana: each holding (native coin, USDC/USDT and any tokens you list) priced from on-chain pools, the total, and warnings for thin pools or positions bigger than their pool. $0.005 USDC per call over x402. Failed calls cost nothing. Call

  • pretrade_check

    Before trading a token on Base, Ethereum or Solana: its USD price and liquidity, plain warnings read from the chain, how big your planned trade is next to the pool (rough price impact), how much your wallet already holds, and recent web results about the token. Facts, not advice.

  • crypto_news

    Get recent crypto news for a coin or topic: up to 10 articles from the past hour, day or week with publisher, date, snippet and link, plus a short AI read of the coverage (mood: positive, negative, mixed or neutral; a summary; main themes) written only from those headlines. A rea

  • perps_market

    Hyperliquid perpetuals: mark and oracle price, 24h change, current hourly funding rate (positive means longs pay shorts) and annualized, open interest in coins and USD, 24h volume and max leverage. Name up to 20 coins, or leave coins out to get the top markets sorted by volume, o

  • crypto_market_pulse

    Get the crypto market at a glance in one call: the Crypto Fear & Greed Index (today, yesterday, a week ago), BTC, ETH and SOL with perp price, 24h change, funding and Chainlink reference price, the highest and lowest funding rates, the biggest 24h gainers and losers, and Hyperliq

  • price_history

    Get past USD prices for a crypto asset (ETH, BTC, SOL, LINK and others with a Chainlink feed) over up to 365 days: up to 100 points read from Chainlink's on-chain price feed on Ethereum, each with its time and round, plus first, last, high, low and percent change. $0.002 USDC per

  • x_pulse

    The mood on X (Twitter) about a coin or crypto topic in the last 24 hours: bullish, bearish, mixed or quiet, a score from -1 (very bearish) to 1 (very bullish), how many posts were read, up to three short themes, and links to representative posts. Giveaways, bots and paid promoti

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月8日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名は、リポジトリを所有するGitHubアカウント UltraStarz で確認済みです

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    684ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    13件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

暗号資産・ブロックチェーンのほかのサーバーとの比較i

  • このカテゴリのほかの1614件のうち0%よりスターが多い
  • このカテゴリのほかの1614件のうち73%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの1614件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Tollkit Cryptoは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(0.1.0)がレジストリに届いたのは18 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:gasrescue, xsolana, CashPan

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

gasrescue

作者:gasrescue

Rescue USDC, USDT and USDG from wallets with no gas: send or swap them on EVM, Solana and Tron.

パソコンで動く今日更新
インストール

xsolana

作者:XGamesFun

Design, check, simulate and launch Solana game economies on loot, one shared program, no contract.

パソコンで動く今日更新
インストール

CashPan

作者:cashpan.app

Give your AI an allowance: pay approved people within on-chain spending limits.

クラウドで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Tollkit MCP server

Pay-per-call tools for AI agents, as one remote MCP server:

https://api.tollkit.dev/mcp

No account and no API key. Each paid tool costs a fixed amount of USDC, paid per call with x402 on Base or Solana. A call that fails is never charged.

Listed in the official MCP Registry as io.github.UltraStarz/x402-extract.

Connect

Add the URL above as a remote (Streamable HTTP) MCP server in Claude, Cursor or any MCP client. In clients that take a JSON config:

{

"mcpServers": { "tollkit": { "url": "https://api.tollkit.dev/mcp" } } }

Paying: MCP has no 402 status, so a paid tool called without its payment argument returns the price quote as its result. Sign that quote with your x402 wallet and call the tool again with payment set. Six tools are always free: try_it_free (a real sample result), get_service_info, find_service, check_service, check_my_balance and verify_attestation. Fourteen give 3 free calls a day without a payment: read_page, screenshot_page, pdf_to_text, weather_forecast, airport_delays, geocode_address, exchange_rate, ip_lookup, wallet_balance, token_info, transaction_lookup, token_price, token_check and sec_company.

Tools

GroupToolsPrice per call
Web pages & documentsweb search (with date, site and news filters), search + read top pages, read a page or up to 5 at once in a real browser, screenshot, summarize, page brief, PDF to text$0.002 – $0.008
Public dataSEC filings, financials, company snapshot and due diligence; weather anywhere in the world (by point, or US address); FAA airport delays; US address geocoding; exchange rates; IP lookup$0.002 – $0.03
On-chain (Base, Ethereum, Solana)wallet balance and portfolio, token info, token price, token safety check, transaction lookup, pre-trade check$0.001 – $0.01
x402 market databest x402 tools for a task, seller lookup, full market dataset$0.01 – $0.10
Product dataprice, stock, brand, SKU and images from a store page; compare up to 5$0.01 – $0.04
Proofsigned, timestamped record of what a page said$0.05

Live prices: /health · every tool with its URL and body: llms.txt · tollkit.dev/tools

Without MCP

Every tool is also a plain HTTP endpoint: POST the JSON body, get HTTP 402 with the price, pay with any x402 client (for example @x402/fetch), repeat the request. OpenAPI per hostname, e.g. https://data.tollkit.dev/openapi.json.

This repo

server.json is the MCP Registry entry. src/ holds an older stdio client (the x402-extract-mcp npm package) that only wraps product extraction and is no longer maintained; use the remote server above instead.

More

MIT licensed.

PopNxに聞く