プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

17TRACK MCP by usefulapi

作者:m190バージョン 1.22.3i★ –iクラウドで動く
レジストリ名io.usefulapi/17track

インストール

概要

作者による説明(英語の原文)

Track parcels across 3000+ carriers with 17TRACK: register numbers, read tracking events and quota.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://17track.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http 17track https://17track.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "17track": {
      "url": "https://17track.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "17track": {
      "type": "http",
      "url": "https://17track.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://17track.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • track17_get_quota

    The account's tracking quota: total, used, remaining, used today, the daily registration limit (0 = no limit) and the free e-mail quota. Each registered tracking number uses 1 quota. POST /getquota.

  • track17_list_tracking_numbers

    Search the tracking numbers registered on this account (40 per page) with their carrier, status, registration and last-update times, and latest event. Filter by number(s), carrier, tracking state, package status or registration date. Free: it does not use quota. POST /gettracklis

  • track17_get_tracking

    Full tracking details (status, sub-status, milestones, every carrier event with time and location, estimated delivery) for up to 10 numbers that are ALREADY registered on this account. Free: it does not use quota. A number that is not registered comes back in `rejected` — registe

  • track17_realtime_lookup

    WRITE (uses quota): look up ONE tracking number directly at the carrier right now, without registering it. Costs 1 quota per call (standard: carrier data up to 3 hours old). If the number is already registered, a changed result is also pushed to the account. Not supported for USP

  • track17_register_numbers

    WRITE (uses quota): start tracking up to 10 tracking numbers per call. Each ACCEPTED number costs 1 quota from this account (see track17_get_quota); rejected numbers cost nothing. Deleting and re-registering a number costs again. 17TRACK then updates the status itself every 6-12

  • track17_change_carrier

    WRITE: assign a different carrier to registered tracking numbers (up to 10 per call), for example when auto-detection picked the wrong one. A number can change carrier at most 5 times, and a successful change can be charged as one shipment (see track17_get_quota). POST /changecar

  • track17_change_tag

    WRITE: set the tag (your own label, max 100 characters) of a registered tracking number. It replaces the old tag. Free. POST /changeinfo.

  • track17_stop_tracking

    WRITE: stop tracking registered numbers (up to 10 per call). The numbers stay in the account for 90 days with their history and can be restarted ONCE each with track17_retrack. Stopping does not refund quota. POST /stoptrack.

  • track17_retrack

    WRITE: restart tracking of stopped numbers (up to 10 per call). Each number can be restarted only ONCE in its lifetime, so a second restart is rejected. POST /retrack.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    230ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    9件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32375件のうち0%よりスターが多い
  • このカテゴリのほかの32375件のうち97%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32375件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

17TRACK MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.22.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, DiffCI

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211昨日更新
インストール

DiffCI

作者:DiffCI

Fail-closed, change-aware verification for AI coding agents with affected-test guidance.

パソコンでもクラウドでも今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

17TRACK MCP by usefulapi

Use 17TRACK from Claude, Cursor, or any MCP client — tracking numbers, tracking events, quota and carrier changes across 3000+ carriers. Hosted, no local install: connect with your own 17TRACK credentials.

Live endpoint: https://17track.usefulapi.io/mcp · Homepage: https://usefulapi.io/17track

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://17track.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http 17track https://17track.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "17track": { "url": "https://17track.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your 17TRACK credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/17track/

Tools

ToolTypeWhat it does
track17_get_quotareadGet tracking quota
track17_list_tracking_numbersreadList registered tracking numbers
track17_get_trackingreadGet tracking details
track17_realtime_lookupwriteReal-time lookup of one number
track17_register_numberswriteRegister tracking numbers
track17_change_carrierwriteChange the carrier of a number
track17_change_tagwriteChange the tag of a number
track17_stop_trackingwriteStop tracking numbers
track17_retrackwriteRestart tracking of stopped numbers
track17_usage_statusmetaUsage status (free-tier meter)
track17_request_featuremetaRequest a missing feature
track17_upgrademetaUpgrade to Pro or Pro+
track17_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with track17_upgrade (it returns a Stripe Checkout link). Cancel any time with track17_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running track17_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by 17TRACK.

PopNxに聞く