プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Adafruit IO MCP by usefulapi

作者:m190バージョン 1.22.4i★ –iクラウドで動く
レジストリ名io.usefulapi/adafruit-io

インストール

概要

作者による説明(英語の原文)

Read Adafruit IO feeds, data, groups and dashboards; publish a data point or create a feed.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://adafruit-io.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http adafruit-io https://adafruit-io.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "adafruit-io": {
      "url": "https://adafruit-io.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "adafruit-io": {
      "type": "http",
      "url": "https://adafruit-io.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://adafruit-io.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • adafruitio_get_user

    The Adafruit IO account this key belongs to: id, name, username, time zone, created/updated times, plus the data rate limit when reported. GET /api/v2/user.

  • adafruitio_get_throttle

    The account's data rate limit (data-record modifications per minute: 30 on free accounts, 60 on Plus) and the current active data rate. Check it before publishing many points. GET /api/v2/{username}/throttle.

  • adafruitio_list_feeds

    List all of the account's feeds with key, name, description, unit, visibility, enabled flag, last value and last update. GET /feeds.

  • adafruitio_get_feed

    One feed by key: name, description, unit, visibility, last value, status settings and the groups it belongs to. GET /feeds/{feed_key}.

  • adafruitio_get_feed_details

    A feed with its details block: first and last data point and the number of stored points. GET /feeds/{feed_key}/details.

  • adafruitio_list_feed_data

    Data points of a feed (max 1000 per call). Newest first, except that with start_time the API returns the oldest page after that time. Filter by time range and limit; to read further back call again with the reply's next_page_args (the same filters plus `before`). GET /feeds/{feed

  • adafruitio_get_last_data

    The most recent data point of a feed (value, location, created_at). GET /feeds/{feed_key}/data/last.

  • adafruitio_get_data_point

    One stored data point of a feed by its id. GET /feeds/{feed_key}/data/{id}.

  • adafruitio_get_feed_chart

    Aggregated chart data for a feed: values sliced by `resolution` minutes over the last `hours` (or a start/end range), using avg, sum, min, max, val or val_count. Good for trends without downloading every point. GET /feeds/{feed_key}/data/chart.

  • adafruitio_list_groups

    List the account's groups (named sets of feeds) with their feeds. GET /groups.

  • adafruitio_get_group

    One group by key with its feeds. GET /groups/{group_key}.

  • adafruitio_list_dashboards

    List the account's dashboards with key, name, description and visibility. GET /dashboards.

  • adafruitio_get_dashboard

    One dashboard by key. GET /dashboards/{dashboard_key}.

  • adafruitio_list_blocks

    The blocks (widgets: gauges, toggles, charts, sliders...) of a dashboard with their feeds, position and properties. Integration secrets in properties are removed. GET /dashboards/{dashboard_key}/blocks.

  • adafruitio_list_activities

    The account's activity log (feed/data/dashboard changes), optionally within a time range. GET /activities.

  • adafruitio_publish_data_point

    WRITE: publish one data point (a value) to a feed. This can drive REAL DEVICES: anything subscribed to the feed (relays, motors, lights, heaters, locks, dashboard toggles) will receive and may act on the value, and it cannot be undone from here. Only publish a value the user has

  • adafruitio_create_feed

    WRITE: create a new, empty feed (private by default), optionally inside an existing group. Adds a feed only; it does not change or delete anything existing, and fails if the name is taken. POST /feeds.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    20ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    17件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32489件のうち0%よりスターが多い
  • このカテゴリのほかの32489件のうち99%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32489件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Adafruit IO MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.22.4)がレジストリに届いたのは今日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Whisper

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211昨日更新
インストール

Whisper

作者:whisper-sec

One routable IPv6 per AI agent, verifiable from the DNS root. Keyless tools need no signup.

パソコンでもクラウドでも今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Adafruit IO MCP by usefulapi

Use Adafruit IO from Claude, Cursor, or any MCP client — IoT feeds, feed data and charts, groups, dashboards and activity, plus single data-point publishes. Hosted, no local install: connect with your own Adafruit IO credentials.

Live endpoint: https://adafruit-io.usefulapi.io/mcp · Homepage: https://usefulapi.io/adafruit-io

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://adafruit-io.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http adafruit-io https://adafruit-io.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "adafruit-io": { "url": "https://adafruit-io.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Adafruit IO credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/adafruit-io/

Tools

ToolTypeWhat it does
adafruitio_get_userreadGet user
adafruitio_get_throttlereadGet data rate limit
adafruitio_list_feedsreadList feeds
adafruitio_get_feedreadGet feed
adafruitio_get_feed_detailsreadGet feed details
adafruitio_list_feed_datareadList feed data
adafruitio_get_last_datareadGet latest data point
adafruitio_get_data_pointreadGet data point
adafruitio_get_feed_chartreadGet feed chart data
adafruitio_list_groupsreadList groups
adafruitio_get_groupreadGet group
adafruitio_list_dashboardsreadList dashboards
adafruitio_get_dashboardreadGet dashboard
adafruitio_list_blocksreadList dashboard blocks
adafruitio_list_activitiesreadList activity log
adafruitio_publish_data_pointwritePublish data point
adafruitio_create_feedwriteCreate feed
adafruitio_usage_statusmetaUsage status (free-tier meter)
adafruitio_request_featuremetaRequest a missing feature
adafruitio_upgrademetaUpgrade to Pro or Pro+
adafruitio_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with adafruitio_upgrade (it returns a Stripe Checkout link). Cancel any time with adafruitio_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running adafruitio_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by Adafruit IO.

PopNxに聞く