プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Appointedd MCP by usefulapi

作者:m190バージョン 1.11.3i★ –iクラウドで動く
レジストリ名io.usefulapi/appointedd

インストール

概要

作者による説明(英語の原文)

Read Appointedd bookings, customers and availability; create, change and cancel bookings.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://appointedd.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http appointedd https://appointedd.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "appointedd": {
      "url": "https://appointedd.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "appointedd": {
      "type": "http",
      "url": "https://appointedd.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://appointedd.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • appointedd_list_bookings

    List bookings, newest first by default. Filter by time window (after/before), customer, service, resource, category, status or creation/update time. Each booking has its service, resource, start/end, status and the customers on it (with their notes, questions and statuses). Page

  • appointedd_list_customers

    List customers in the CRM: name, email, phone/mobile, address, tags, custom fields, marketing opt-in. Page with `next`. GET /customers.

  • appointedd_get_customer

    One customer by id. GET /customers/{customer_id}.

  • appointedd_list_resources

    List resources (the staff members, rooms or equipment that bookings are made for): name, assigned service ids and resource group ids. Page with `next`. GET /resources.

  • appointedd_list_resource_groups

    List resource groups (id and name). Page with `next`. GET /resources/groups.

  • appointedd_list_services

    List services (what can be booked): name, category, durations and prices, buffers, occupancy and booking type. Page with `next`. GET /services.

  • appointedd_get_service

    One service by id, including its booking questions, durations, prices and buffers. GET /services/{service_id}.

  • appointedd_list_service_categories

    List service categories (id and name). Page with `next`. GET /services/categories.

  • appointedd_get_service_category

    One service category by id. GET /services/categories/{category_id}.

  • appointedd_find_available_intervals

    Find the start times at which a service can be booked in the given ranges, with the free resource ids for each (and existing group bookings with room). Step 1 of making a booking: pick a start, then appointedd_create_reservation. Read-only. POST /availability/intervals/search.

  • appointedd_find_available_dates

    Find which days in the given ranges have any availability for a service (a calendar view; use appointedd_find_available_intervals for the times). Read-only. POST /availability/days/search.

  • appointedd_get_reservation

    One reservation (availability slot) by id: its service, resource, times and expiry. GET /availability/slots/{reservation_id}.

  • appointedd_create_customer

    WRITE: create a customer in the CRM (first and last name required; email, mobile, phone, tags optional). POST /customers.

  • appointedd_update_customer

    WRITE: change a customer's name, email, mobile, phone or tags. Only the fields you pass are sent; `tags` replaces the customer's tag list. PUT /customers/{customer_id}.

  • appointedd_create_reservation

    WRITE: hold a date and time for a booking (step 2). The reservation blocks that slot for `expires_after` minutes (default: the organisation's setting); then call appointedd_create_booking with the returned reservation id. Without resource_id a free resource assigned to the servic

  • appointedd_create_booking

    WRITE: turn an active reservation into a booking (step 3) for one or more customers; Appointedd matches each customer to the CRM by name/email/mobile or creates it. Payment requests are NOT sent unless send_payment_request is true. With an empty customers list an empty booking is

  • appointedd_update_booking

    WRITE: change a booking's service, resource, label or total spaces, or move it by giving `parts` with new start/end times. Customers are NOT emailed unless send_notifications is true. PUT /bookings/{booking_id}.

  • appointedd_update_booking_customer

    WRITE: set the arrival status (Arrived, Complete, No Show, No Status) and/or notes of one customer on a booking. customer_booking_id is the customer's `customer_booking_id` (or `customer_id`) in the booking's customers list. PUT /bookings/{booking_id}/customers/{customer_booking_

  • appointedd_cancel_booking

    WRITE (cannot be undone): cancel a whole booking. Appointedd may notify the customers according to the organisation's settings. To remove one customer from a group booking use appointedd_cancel_booking_customer. POST /bookings/{booking_id}/cancel.

  • appointedd_cancel_booking_customer

    WRITE (cannot be undone): cancel one customer's place on a booking (the booking stays for the others). customer_booking_id is the `customer_booking_id` in the booking's customers list. POST /bookings/{booking_id}/customers/{customer_booking_id}/cancel.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    48ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    20件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32398件のうち0%よりスターが多い
  • このカテゴリのほかの32398件のうち97%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32398件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Appointedd MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.11.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, AI Deprecations

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211昨日更新
インストール

AI Deprecations

作者:aideprecations.com

AI model shutdown dates, replacements, change feed and webhook alerts for 8 providers.

クラウドで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Appointedd MCP by usefulapi

Read Appointedd bookings, customers and availability; create, change and cancel bookings. Hosted, no local install.

Live endpoint: https://appointedd.usefulapi.io/mcp · Homepage: https://usefulapi.io/appointedd

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://appointedd.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http appointedd https://appointedd.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "appointedd": { "url": "https://appointedd.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Appointedd credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/appointedd/

On first connect you will paste your Appointedd credentials. They are validated, stored per-user, and scoped to you. No keys in config files.

Tools

ToolTypeWhat it does
appointedd_list_bookingsreadList bookings
appointedd_list_customersreadList customers
appointedd_get_customerreadGet customer
appointedd_list_resourcesreadList resources
appointedd_list_resource_groupsreadList resource groups
appointedd_list_servicesreadList services
appointedd_get_servicereadGet service
appointedd_list_service_categoriesreadList service categories
appointedd_get_service_categoryreadGet service category
appointedd_find_available_intervalsreadFind available times
appointedd_find_available_datesreadFind available days
appointedd_get_reservationreadGet reservation
appointedd_create_customerwriteCreate customer
appointedd_update_customerwriteUpdate customer
appointedd_create_reservationwriteCreate reservation (hold a time)
appointedd_create_bookingwriteCreate booking
appointedd_update_bookingwriteUpdate booking
appointedd_update_booking_customerwriteUpdate customer on booking
appointedd_cancel_bookingwriteCancel booking
appointedd_cancel_booking_customerwriteCancel customer on booking
appointedd_usage_statusmetaUsage status (free-tier meter)
appointedd_request_featuremetaRequest a missing feature
appointedd_upgrademetaUpgrade to Pro or Pro+
appointedd_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per account)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with appointedd_upgrade (it returns a Stripe Checkout link). Cancel any time with appointedd_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running appointedd_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT

PopNxに聞く