プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

DialMyCalls MCP by usefulapi

作者:m190バージョン 1.16.4i★ –iクラウドで動く
レジストリ名io.usefulapi/dialmycalls

インストール

概要

作者による説明(英語の原文)

Manage DialMyCalls contacts and groups; read broadcasts; send text and voice broadcasts on approval.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://dialmycalls.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http dialmycalls https://dialmycalls.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "dialmycalls": {
      "url": "https://dialmycalls.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "dialmycalls": {
      "type": "http",
      "url": "https://dialmycalls.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://dialmycalls.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • dialmycalls_get_account

    Get the account: credits available (calls and texts spend credits) and the account creation date.

  • dialmycalls_list_contacts

    List contacts in the account (name, phone, email, groups), 100 per page.

  • dialmycalls_list_contacts_in_group

    List the contacts that belong to one contact group (from dialmycalls_list_groups), 100 per page.

  • dialmycalls_get_contact

    Get one contact by id.

  • dialmycalls_create_contact

    Add a contact (phone number required) to the contact list, optionally into contact groups. Sends nothing to the contact.

  • dialmycalls_update_contact

    Update a contact. DialMyCalls requires the phone number on every update. Fields you omit are left as they are; if you pass group_ids the contact's groups are REPLACED by that list.

  • dialmycalls_list_groups

    List contact groups with their contact counts, 100 per page.

  • dialmycalls_get_group

    Get one contact group (name, contacts_count) by id.

  • dialmycalls_create_group

    Create an empty contact group. Sends nothing.

  • dialmycalls_list_recordings

    List voice recordings (the messages a call broadcast can play): id, name, type, length, processed. A call needs a processed recording.

  • dialmycalls_get_recording

    Get one voice recording by id (includes its audio file url and whether it is processed and ready).

  • dialmycalls_create_recording_tts

    Create a voice recording from text (text-to-speech) that a call broadcast can then play. Makes no call and sends nothing.

  • dialmycalls_list_caller_ids

    List caller ID phone numbers on the account (id, name, phone, approved). A call broadcast needs an approved caller ID.

  • dialmycalls_list_keywords

    List text-message keywords (id, keyword, status). A text broadcast must be tied to one active keyword.

  • dialmycalls_list_shortcodes

    List shortcodes available to send texts from.

  • dialmycalls_list_do_not_contacts

    List phone numbers on the account's do-not-contact lists (type call or text); these opted out.

  • dialmycalls_list_calls

    List voice call broadcasts (name, recording, recipients, credit cost, send time), 100 per page.

  • dialmycalls_get_call

    Get one voice call broadcast by id (name, recipients, credit cost, send time, pending_cancel).

  • dialmycalls_list_call_recipients

    List the recipients of a call broadcast with the result per number (answered, voicemail, busy, no answer...), 100 per page.

  • dialmycalls_send_call

    Send (or schedule) an automated VOICE CALL broadcast that plays a recording to real people. THIS SPENDS ACCOUNT CREDITS AND PHONES THE RECIPIENTS; it cannot be undone once it goes out (a scheduled one can be stopped with dialmycalls_cancel_call). Needs an approved caller_id (dial

  • dialmycalls_cancel_call

    Cancel an outgoing or scheduled call broadcast that has not finished. Calls already placed are not undone.

  • dialmycalls_list_texts

    List outgoing text (SMS) broadcasts (name, recipients, credit cost, send time), 100 per page.

  • dialmycalls_get_text

    Get one outgoing text broadcast by id (name, recipients, credit cost, send time, pending_cancel).

  • dialmycalls_list_text_recipients

    List the recipients of a text broadcast with the delivery status per number (delivered, undeliverable, queued...), 100 per page.

  • dialmycalls_send_text

    Send (or schedule) a TEXT MESSAGE (SMS) broadcast to real people. THIS SPENDS ACCOUNT CREDITS AND TEXTS THE RECIPIENTS; it cannot be undone once it goes out (a scheduled one can be stopped with dialmycalls_cancel_text). Needs an active keyword (dialmycalls_list_keywords). Up to 1

  • dialmycalls_cancel_text

    Cancel an outgoing or scheduled text broadcast that has not finished. Texts already sent are not undone.

  • dialmycalls_list_incoming_texts

    List text messages people sent to the account's numbers (from, to, message, time), 100 per page.

  • dialmycalls_get_incoming_text

    Get one incoming text message by id.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    40ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    28件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32505件のうち0%よりスターが多い
  • このカテゴリのほかの32505件のうち99%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32505件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

DialMyCalls MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.16.4)がレジストリに届いたのは今日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, topo^alpin

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211昨日更新
インストール

topo^alpin

作者:topoalpin.app

Avalanche bulletins and mountain weather forecasts for any place in the Alps.

クラウドで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

DialMyCalls MCP by usefulapi

Manage DialMyCalls contacts and groups; read broadcasts; send text and voice broadcasts on approval.

Live endpoint: https://dialmycalls.usefulapi.io/mcp · Homepage: https://usefulapi.io/dialmycalls

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://dialmycalls.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http dialmycalls https://dialmycalls.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "dialmycalls": { "url": "https://dialmycalls.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your DialMyCalls credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/dialmycalls/

On first connect you'll paste your DialMyCalls API key (log in, then API Info).

Tools

ToolTypeWhat it does
dialmycalls_get_accountreadGet DialMyCalls account
dialmycalls_list_contactsreadList contacts
dialmycalls_list_contacts_in_groupreadList contacts in a group
dialmycalls_get_contactreadGet a contact
dialmycalls_create_contactwriteCreate a contact
dialmycalls_update_contactwriteUpdate a contact
dialmycalls_list_groupsreadList contact groups
dialmycalls_get_groupreadGet a contact group
dialmycalls_create_groupwriteCreate a contact group
dialmycalls_list_recordingsreadList voice recordings
dialmycalls_get_recordingreadGet a recording
dialmycalls_create_recording_ttswriteCreate a text-to-speech recording
dialmycalls_list_caller_idsreadList caller IDs
dialmycalls_list_keywordsreadList text keywords
dialmycalls_list_shortcodesreadList shortcodes
dialmycalls_list_do_not_contactsreadList do-not-contact numbers
dialmycalls_list_callsreadList call broadcasts
dialmycalls_get_callreadGet a call broadcast
dialmycalls_list_call_recipientsreadList call recipients
dialmycalls_send_callwriteSend a voice call broadcast (spends credits)
dialmycalls_cancel_callwriteCancel a call broadcast
dialmycalls_list_textsreadList text broadcasts
dialmycalls_get_textreadGet a text broadcast
dialmycalls_list_text_recipientsreadList text recipients
dialmycalls_send_textwriteSend a text (SMS) broadcast (spends credits)
dialmycalls_cancel_textwriteCancel a text broadcast
dialmycalls_list_incoming_textsreadList incoming texts
dialmycalls_get_incoming_textreadGet an incoming text
dialmycalls_usage_statusmetaUsage status (free-tier meter)
dialmycalls_request_featuremetaRequest a missing feature
dialmycalls_upgrademetaUpgrade to Pro or Pro+
dialmycalls_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with dialmycalls_upgrade (it returns a Stripe Checkout link). Cancel any time with dialmycalls_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running dialmycalls_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by DialMyCalls.

PopNxに聞く