プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

EmailOctopus MCP by usefulapi

作者:m190バージョン 1.35.3i★ –iクラウドで動く
レジストリ名io.usefulapi/emailoctopus

インストール

概要

作者による説明(英語の原文)

Manage lists, contacts and campaigns, and read campaign performance reports on EmailOctopus.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: マーケティング・SNS

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://emailoctopus.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http emailoctopus https://emailoctopus.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "emailoctopus": {
      "url": "https://emailoctopus.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "emailoctopus": {
      "type": "http",
      "url": "https://emailoctopus.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://emailoctopus.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • emailoctopus_list_lists

    List all lists in the account. Returns {data:[...],paging:{...}} — each list's id, name, contact counts by status, and created_at. Paginate with `limit` (max 100) and `starting_after` (cursor from the previous page). EmailOctopus: GET /lists.

  • emailoctopus_get_list

    Get a single list by its id. Returns the list's full state — name, contact counts by status, and created_at. EmailOctopus: GET /lists/{list_id}.

  • emailoctopus_list_contacts

    List the contacts in a list. Returns {data:[...],paging:{...}} — each contact's id, email_address, fields, tags, status, and created_at. Paginate with `limit` (max 100) and `starting_after`. EmailOctopus: GET /lists/{list_id}/contacts.

  • emailoctopus_get_contact

    Get a single contact in a list. Returns email_address, fields, tags, status, and created_at. `contact_id` is the MD5 hash of the lowercased email address, or the `id` returned by emailoctopus_list_contacts. EmailOctopus: GET /lists/{list_id}/contacts/{contact_id}.

  • emailoctopus_list_campaigns

    List all campaigns in the account. Returns {data:[...],paging:{...}} — each campaign's id, name, status, subject, and created_at. Paginate with `limit` (max 100) and `starting_after`. EmailOctopus: GET /campaigns.

  • emailoctopus_get_campaign

    Get a single campaign by its id. Returns the campaign's full state — name, status, subject, from, content, and created_at. EmailOctopus: GET /campaigns/{campaign_id}.

  • emailoctopus_get_campaign_report

    Get a campaign's aggregate performance report — sent, opened, clicked, bounced, unsubscribed, complained, and related counts. EmailOctopus: GET /campaigns/{campaign_id}/reports/summary.

  • emailoctopus_get_campaign_links_report

    Get a campaign's per-link click report — for each link in the campaign, the URL and its click counts. EmailOctopus: GET /campaigns/{campaign_id}/reports/links.

  • emailoctopus_create_list

    CREATES a new list — this MODIFIES live data. Provide a `name`. EmailOctopus: POST /lists. Returns the created list.

  • emailoctopus_update_list

    UPDATES an existing list by id — this MODIFIES live data. Sets the list's `name`. EmailOctopus: PUT /lists/{list_id}. Returns the updated list.

  • emailoctopus_create_contact

    CREATES a new contact in a list — this MODIFIES live data (adds a subscriber). `email_address` is required; optionally set `fields` (keyed by field tag), `tags`, and `status`. EmailOctopus: POST /lists/{list_id}/contacts. Returns the created contact.

  • emailoctopus_update_contact

    UPDATES an existing contact in a list — this MODIFIES live data. Send only the fields you want to change (email_address, fields, tags, status). `contact_id` is the MD5 hash of the lowercased email address, or the id from list_contacts. EmailOctopus: PUT /lists/{list_id}/contacts/

  • emailoctopus_delete_contact

    PERMANENTLY REMOVES a contact from a list — this MODIFIES live data and cannot be undone. `contact_id` is the MD5 hash of the lowercased email address, or the id from list_contacts. EmailOctopus: DELETE /lists/{list_id}/contacts/{contact_id}.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    11ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    13件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

マーケティング・SNSのほかのサーバーとの比較i

  • このカテゴリのほかの2954件のうち0%よりスターが多い
  • このカテゴリのほかの2954件のうち97%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの2954件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

EmailOctopus MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.35.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:MCP YouTube Transcript, Google Analytics MCP, BibiGPT YouTube Video Summarizer

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Google Analytics MCP

作者:surendranb

GA4 MCP server for AI agents: schema discovery, server-side aggregation, analysis-ready defaults.

パソコンで動く★ 244MIT9 日前更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

EmailOctopus MCP by usefulapi

Manage EmailOctopus from Claude, Cursor, or any MCP client — manage lists, contacts and campaigns, and read campaign performance reports. Hosted, no local install: connect with your EmailOctopus API token.

Live endpoint: https://emailoctopus.usefulapi.io/mcp · Homepage: https://usefulapi.io

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://emailoctopus.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http emailoctopus https://emailoctopus.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "emailoctopus": { "url": "https://emailoctopus.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your EmailOctopus credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/emailoctopus/

On first connect you'll paste your EmailOctopus API token (EmailOctopus → Account → Integrations & API). It's validated, stored per-user, and scoped to you — no keys in config files.

Tools

ToolTypeWhat it does
emailoctopus_list_listsreadList lists
emailoctopus_get_listreadGet list
emailoctopus_list_contactsreadList contacts
emailoctopus_get_contactreadGet contact
emailoctopus_list_campaignsreadList campaigns
emailoctopus_get_campaignreadGet campaign
emailoctopus_get_campaign_reportreadGet campaign report
emailoctopus_get_campaign_links_reportreadGet campaign links report
emailoctopus_create_listwriteCreate list
emailoctopus_update_listwriteUpdate list
emailoctopus_create_contactwriteCreate contact
emailoctopus_update_contactwriteUpdate contact
emailoctopus_delete_contactwriteDelete contact
emailoctopus_usage_statusmetaUsage status (free-tier meter)
emailoctopus_request_featuremetaRequest a missing feature
emailoctopus_upgrademetaUpgrade to Pro or Pro+
emailoctopus_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with emailoctopus_upgrade (it returns a Stripe Checkout link). Cancel any time with emailoctopus_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running emailoctopus_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT — see LICENSE. Documentation only; the server is hosted.

PopNxに聞く