プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Evenium MCP by usefulapi

作者:m190バージョン 1.11.3i★ –iクラウドで動く
レジストリ名io.usefulapi/evenium

インストール

概要

作者による説明(英語の原文)

Read Evenium events, guests, contacts and hotels; register guests and update contacts and statuses.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://evenium.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http evenium https://evenium.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "evenium": {
      "url": "https://evenium.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "evenium": {
      "type": "http",
      "url": "https://evenium.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://evenium.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • evenium_list_events

    List the events of the Evenium account, with id, title, dates, status and creation date. Filter by title (partial match), status and start/end/creation dates. Use an event id with the guest and session tools. GET /events.

  • evenium_get_event

    One event by id: title, description, dates, status, site path and its fields (type, your external id, ...). GET /events/{eventId}.

  • evenium_list_guests

    List the guests (invited contacts) of an event with name, email, company, registration status (e.g. CONFIRMED, DECLINED, UNANSWERED), category and fields. Filter by status, name, email, company or last update. GET /events/{eventId}/guests.

  • evenium_get_guest

    One guest of an event, by contact id or by guest code: name, email, status, category and fields (event-only fields flagged). Optionally include REGISTRATION (registrations to sessions), PRESENCE and SIGNATURE data. GET /events/{eventId}/guests/{contactId} or /guests/guestCode/{gu

  • evenium_get_guest_status

    The registration status of one guest at an event (e.g. CONFIRMED, DECLINED, CANCELED). GET /events/{eventId}/guests/{contactId}/status.

  • evenium_get_guest_post_status

    The attendance (post) status of one guest after the event: UNKNOWN, NO_SHOW or PRESENT. GET /events/{eventId}/guests/{contactId}/postStatus.

  • evenium_get_guest_accommodations

    The hotel room bookings of one guest at an event: room id, check-in and check-out dates, status. Not available on the evenium.net platform. GET /events/{eventId}/guests/{contactId}/accommodations.

  • evenium_list_hotels

    The hotels of an event with name, group, stars, contact details and, if asked, full location and rooms. Not available on the evenium.net platform. GET /events/{eventId}/hotels.

  • evenium_create_guest

    WRITE: invite a person to an event. Either invite an existing contact (contact_id) or create a guest from scratch (first_name, last_name, email, ...), which may also create a new contact. The optional status sets the registration status (the invitation emails of the event may fol

  • evenium_update_guest_status

    WRITE: set the registration status of a guest at an event (e.g. CONFIRMED, DECLINED, CANCELED). Can trigger Evenium's own workflows for that status. Read the current value first with evenium_get_guest_status. PUT /events/{eventId}/guests/{contactId}/status.

  • evenium_update_guest_post_status

    WRITE: set the attendance (post) status of a guest: PRESENT, NO_SHOW or UNKNOWN (for example after check-in). PUT /events/{eventId}/guests/{contactId}/postStatus.

  • evenium_list_contacts

    List the contacts of the address book (id, your custom id, name, email, company and fields). Filter by name, email, company or last update. GET /contacts.

  • evenium_get_contact

    One contact by Evenium id or `ext: `: name, gender, email, company and fields. GET /contacts/{contactId}.

  • evenium_get_contact_events

    The events a contact is invited to, with the contact's registration (status, post status, category) in each. Filter by event start, end or creation date. GET /contacts/{contactId}/events.

  • evenium_create_contact

    WRITE: add a contact to the address book (name, email, company, optional custom id and fields). Does not invite them to an event (use evenium_create_guest). May create a duplicate of an existing person: search with evenium_list_contacts first. POST /contacts.

  • evenium_update_contact

    WRITE: change a contact's email, company or fields (only what you pass is sent). The change applies to the contact everywhere, including its guest records. PUT /contacts/{contactId}.

  • evenium_list_event_parts

    List the event parts (sessions, workshops, activities) of an event with title, dates, nature, code and location. Filter by title and start/end/update dates. GET /events/{eventId}/eventParts.

  • evenium_get_event_part

    One event part (session) by id: title, dates, nature, code, location and fields. GET /events/{eventId}/eventParts/{eventPartId}.

  • evenium_list_event_part_registrations

    The registrations to one session: contact id, status, attendance, category and dates. With include_deleted, deleted registrations are returned too (status DELETED). GET /events/{eventId}/eventParts/{eventPartId}/registrations.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    51ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    19件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32371件のうち0%よりスターが多い
  • このカテゴリのほかの32371件のうち98%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32371件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Evenium MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.11.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Opencu

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211昨日更新
インストール

Opencu

作者:Daily-AC

Independent local computer-use engine and MCP server for macOS, Windows, Linux and Android

パソコンで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Evenium MCP by usefulapi

Live endpoint: https://evenium.usefulapi.io/mcp

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://evenium.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http evenium https://evenium.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "evenium": { "url": "https://evenium.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Evenium credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/evenium/

On first connect you will paste your Evenium API key. It is validated, stored per-user, and scoped to you. No keys in config files.

Tools

ToolTypeWhat it does
evenium_list_eventsreadList events
evenium_get_eventreadGet event
evenium_list_guestsreadList guests
evenium_get_guestreadGet guest
evenium_get_guest_statusreadGet guest status
evenium_get_guest_post_statusreadGet guest attendance
evenium_get_guest_accommodationsreadGet guest accommodations
evenium_list_hotelsreadList hotels
evenium_create_guestwriteCreate guest
evenium_update_guest_statuswriteUpdate guest status
evenium_update_guest_post_statuswriteUpdate guest attendance
evenium_list_contactsreadList contacts
evenium_get_contactreadGet contact
evenium_get_contact_eventsreadGet contact events
evenium_create_contactwriteCreate contact
evenium_update_contactwriteUpdate contact
evenium_list_event_partsreadList event sessions
evenium_get_event_partreadGet event session
evenium_list_event_part_registrationsreadList session registrations
evenium_usage_statusmetaUsage status (free-tier meter)
evenium_request_featuremetaRequest a missing feature
evenium_upgrademetaUpgrade to Pro or Pro+
evenium_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per account)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with evenium_upgrade (it returns a Stripe Checkout link). Cancel any time with evenium_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running evenium_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT

PopNxに聞く