プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Qgiv MCP by usefulapi

作者:m190バージョン 1.22.3i★ –iクラウドで動く
レジストリ名io.usefulapi/qgiv

インストール

概要

作者による説明(英語の原文)

Read Qgiv (Bloomerang Fundraising) donations, refunds, recurring gifts, P2P registrations, events.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://qgiv.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http qgiv https://qgiv.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "qgiv": {
      "url": "https://qgiv.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "qgiv": {
      "type": "http",
      "url": "https://qgiv.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://qgiv.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • qgiv_list_recent_transactions

    The most recent donations/transactions (newest first as Qgiv returns them): id, status, date, amount, fee, net, donor name and id, form, recurring link, payment type and last four card digits, fund. Donor contact details are left out unless include_contact is set; full card numbe

  • qgiv_list_transactions_by_date

    Transactions between two dates (inclusive), at most 31 days per call, paged with offset/limit. Same fields as qgiv_list_recent_transactions. Qgiv has no server-side paging, so a busy range is fetched whole and sliced; use a shorter range if it is too large. POST /reporting/transa

  • qgiv_list_transactions_after_id

    Transactions with an id greater than the given one, sorted by id ascending and paged with limit; next_after_id is the cursor for the next call (use it as after_id). Handy for syncing new gifts. POST /reporting/transactions/after/{id}.

  • qgiv_get_transaction

    One transaction in full: donation lines, fund/restriction, dedication, custom-field answers, event packages, registrations, refunds. Contact details only with include_contact; card data is reduced to the last four digits. POST /reporting/transactions/{id}.

  • qgiv_list_recent_refunds

    The most recent refunds (read-only): id, original transaction, refund and settle dates, amount, payment type, last four digits, fund. POST /reporting/refunds/last/{limit}.

  • qgiv_list_refunds_by_date

    Refunds between two dates (inclusive), at most 31 days per call, paged with offset/limit. POST /reporting/refunds/dates/{begin}:{end}.

  • qgiv_get_refund

    One refund in full by id (read-only; this server never issues refunds). POST /reporting/refunds/{id}.

  • qgiv_list_recurring_schedules

    Recurring donation schedules (read-only): id, start/end date, next billing date, frequency, amount, state, donor name and id, plus Qgiv's 12-month forecast. Filter by status active, paused, expired or deleted. Paged with offset/limit. POST /reporting/recurring/list or /reporting/

  • qgiv_get_recurring_schedule

    One recurring donation schedule by id (read-only; schedules cannot be changed here). POST /reporting/recurring/{id}.

  • qgiv_list_statements

    Monthly fee/payout statements: id, date, amount contributed, fees, refunded, debited, credited and the summary totals (without the per-transaction rows; use qgiv_get_statement for those). Paged with offset/limit. POST /reporting/statements/list.

  • qgiv_get_latest_statements

    The latest statement(s) for the organization or form, with summary totals (per-transaction rows left out). POST /reporting/statements/latest.

  • qgiv_get_statement

    One statement by id with its transaction rows (first 100 shown; donor names only). POST /reporting/statements/{id}.

  • qgiv_list_recent_registrations

    The most recent peer-to-peer (Hobnob) event registrations: id, category, registrant name, team, fundraising goal and amount raised. Contact details only with include_contact. POST /reporting/registrations/last/{limit}.

  • qgiv_list_registrations_by_date

    Peer-to-peer registrations between two dates (inclusive), at most 31 days per call, paged with offset/limit. POST /reporting/registrations/dates/{begin}:{end}.

  • qgiv_get_registration

    One peer-to-peer registration in full (purchase history, team, totals, child registrations). Contact details only with include_contact. POST /reporting/registrations/{id}.

  • qgiv_list_events

    Events (ticketed/auction events) on the forms the token covers: id, dates and the top-level settings. Set include_details for packages, questions and promo codes. Notification e-mail addresses are never returned. POST /events/list.

  • qgiv_list_pledges

    Pledge options configured on the form(s) (title, value, frequency, begin date, iterations, state), not donors' pledge records. POST /pledges/list.

  • qgiv_get_pledge

    One pledge option by id. POST /pledges/{id} (no package is sent, so nothing is changed).

  • qgiv_list_custom_fields

    Custom (additional-question) fields configured on the form(s): id, reference, title, input type, required flags, display flags. POST /customFields/list.

  • qgiv_list_report_mappings

    Report mappings (accounting export mappings) on the form(s): id, identifier, mapping data, export service, type. POST /reporting/mappings/list.

  • qgiv_get_report_mapping

    One report mapping by id. POST /reporting/mappings/{id}.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    13ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    21件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32435件のうち0%よりスターが多い
  • このカテゴリのほかの32435件のうち97%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32435件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Qgiv MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.22.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Apify MCP Server

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211昨日更新
インストール

Apify MCP Server

作者:apify

Extract data from any website with thousands of scrapers, crawlers, and automations on Apify Store ⚡

クラウドで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Qgiv MCP by usefulapi

Use Qgiv from Claude, Cursor, or any MCP client — donations, refunds, recurring gifts, statements, peer-to-peer registrations, events and pledges, read-only. Hosted, no local install: connect with your own Qgiv credentials.

Live endpoint: https://qgiv.usefulapi.io/mcp · Homepage: https://usefulapi.io/qgiv

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://qgiv.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http qgiv https://qgiv.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "qgiv": { "url": "https://qgiv.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Qgiv credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/qgiv/

Tools

ToolTypeWhat it does
qgiv_list_recent_transactionsreadList recent transactions
qgiv_list_transactions_by_datereadList transactions by date range
qgiv_list_transactions_after_idreadList transactions after an id
qgiv_get_transactionreadGet transaction
qgiv_list_recent_refundsreadList recent refunds
qgiv_list_refunds_by_datereadList refunds by date range
qgiv_get_refundreadGet refund
qgiv_list_recurring_schedulesreadList recurring gift schedules
qgiv_get_recurring_schedulereadGet recurring gift schedule
qgiv_list_statementsreadList statements
qgiv_get_latest_statementsreadGet latest statements
qgiv_get_statementreadGet statement
qgiv_list_recent_registrationsreadList recent P2P registrations
qgiv_list_registrations_by_datereadList P2P registrations by date range
qgiv_get_registrationreadGet P2P registration
qgiv_list_eventsreadList events
qgiv_list_pledgesreadList pledge options
qgiv_get_pledgereadGet pledge option
qgiv_list_custom_fieldsreadList custom fields
qgiv_list_report_mappingsreadList report mappings
qgiv_get_report_mappingreadGet report mapping
qgiv_usage_statusmetaUsage status (free-tier meter)
qgiv_request_featuremetaRequest a missing feature
qgiv_upgrademetaUpgrade to Pro or Pro+
qgiv_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with qgiv_upgrade (it returns a Stripe Checkout link). Cancel any time with qgiv_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running qgiv_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by Qgiv.

PopNxに聞く