プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Sendlane MCP by usefulapi

作者:m190バージョン 1.22.3i★ –iクラウドで動く
レジストリ名io.usefulapi/sendlane

インストール

概要

作者による説明(英語の原文)

Manage Sendlane lists, contacts, tags and custom fields; read campaign and SMS reports.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: マーケティング・SNS

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://sendlane.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http sendlane https://sendlane.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "sendlane": {
      "url": "https://sendlane.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "sendlane": {
      "type": "http",
      "url": "https://sendlane.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://sendlane.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • sendlane_list_lists

    List the audience lists of the account: id, name, description, status, created date. GET /lists.

  • sendlane_get_list

    One audience list by id. GET /lists/{listId}.

  • sendlane_list_list_contacts

    Contacts on one list: email, name, phone, subscribed/suppressed state, tags, custom fields, lifetime value. GET /lists/{listId}/contacts.

  • sendlane_list_list_unsubscribed

    Contacts that unsubscribed from one list. GET /lists/{listId}/unsubscribed.

  • sendlane_list_contacts

    All contacts of the account: email, name, phone, lists, tags, custom fields, subscribed/suppressed state. Filter by creation time with from/to. GET /contacts.

  • sendlane_get_contact

    One contact by id, with lists, tags, custom fields, consent, lifetime value and subscribed/suppressed state. GET /contacts/{contactId}.

  • sendlane_list_unsubscribed_contacts

    Contacts that unsubscribed from the account. GET /contacts/unsubscribed.

  • sendlane_get_contact_subscriptions

    The list subscriptions of one contact: list, subscribed/suppressed state, who added it and when. GET /contacts/{contactId}/subscriptions.

  • sendlane_get_contact_tags

    The tags on one contact. GET /contacts/{contactId}/tags.

  • sendlane_get_contact_custom_fields

    The custom field values of one contact. GET /contacts/{contactId}/custom-fields.

  • sendlane_list_tags

    The contact tags of the account: id, name, audience count. GET /tags.

  • sendlane_get_tag

    One tag by id. GET /tags/{tagId}.

  • sendlane_list_tag_contacts

    Contacts that carry one tag. GET /tags/{tagId}/contacts.

  • sendlane_list_custom_fields

    The custom contact fields of the account: id, name, type. Use the ids when setting field values. GET /custom-fields.

  • sendlane_list_segments

    The segments of the account: id, name, list, match rule, last count. GET /segments.

  • sendlane_list_segment_contacts

    Contacts in one segment: id, email, name, phone. GET /segments/{segmentId}/contacts.

  • sendlane_list_campaigns

    Email campaigns: id, name, status, scheduled and sent time, automation. GET /campaigns.

  • sendlane_get_campaign

    One email campaign by id. GET /campaigns/{campaignId}.

  • sendlane_get_campaign_report

    Statistics of one email campaign: sent, opens, clicks (unique too), bounced, suppressed, unsubscribed, spam, revenue. from/to limit the period. GET /campaigns/{campaignId}/report.

  • sendlane_list_sms_messages

    SMS messages (campaign and automation): id, name, campaign status, automation. GET /sms-messages.

  • sendlane_get_sms_report

    Statistics of one SMS message: sent, delivered, clicks, failed, replies, unsubscribed, credits, revenue. from/to limit the period. GET /sms-messages/{messageId}/report.

  • sendlane_list_sender_profiles

    The sender profiles (from name, from/reply email, postal address, default flag). GET /senders.

  • sendlane_create_list

    WRITE: create an audience list. Not idempotent: calling it twice makes two lists. POST /lists.

  • sendlane_update_list

    WRITE: rename a list and/or change its description (a full update: name is required, an omitted description may be cleared). PUT /lists/{listId}.

  • sendlane_add_contacts_to_list

    WRITE: add one or more contacts (up to 100) to a list; a contact that does not exist is created. Each needs an email or a phone. Sendlane accepts the request for processing (HTTP 202). Only add people who agreed to receive marketing. POST /lists/{listId}/contacts.

  • sendlane_remove_contact_from_list

    WRITE: remove one contact from one list (the contact stays in the account). DELETE /lists/{listId}/contacts/{contactId}.

  • sendlane_unsubscribe_contact

    WRITE: unsubscribe one contact from email marketing. The contact stops receiving campaigns. POST /contacts/{contactId}/unsubscribe.

  • sendlane_create_tag

    WRITE: create a contact tag. POST /tags.

  • sendlane_add_contact_tags

    WRITE: put one or more existing tags on a contact. POST /contacts/{contactId}/tags.

  • sendlane_remove_contact_tag

    WRITE: remove one tag from a contact (the tag itself is kept). DELETE /contacts/{contactId}/tags/{tagId}.

  • sendlane_set_contact_custom_fields

    WRITE: add custom field values to a contact. Field ids come from sendlane_list_custom_fields. POST /contacts/{contactId}/custom-fields.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    17ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    31件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

マーケティング・SNSのほかのサーバーとの比較i

  • このカテゴリのほかの2954件のうち0%よりスターが多い
  • このカテゴリのほかの2954件のうち97%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの2954件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Sendlane MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.22.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:MCP YouTube Transcript, Google Analytics MCP, BibiGPT YouTube Video Summarizer

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Google Analytics MCP

作者:surendranb

GA4 MCP server for AI agents: schema discovery, server-side aggregation, analysis-ready defaults.

パソコンで動く★ 244MIT9 日前更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Sendlane MCP by usefulapi

Use Sendlane from Claude, Cursor, or any MCP client — lists, contacts, tags, segments, custom fields, campaign and SMS reports. Hosted, no local install: connect with your own Sendlane credentials.

Live endpoint: https://sendlane.usefulapi.io/mcp · Homepage: https://usefulapi.io/sendlane

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://sendlane.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http sendlane https://sendlane.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "sendlane": { "url": "https://sendlane.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Sendlane credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/sendlane/

Tools

ToolTypeWhat it does
sendlane_list_listsreadList lists
sendlane_get_listreadGet list
sendlane_list_list_contactsreadList contacts of a list
sendlane_list_list_unsubscribedreadList unsubscribed contacts of a list
sendlane_list_contactsreadList contacts
sendlane_get_contactreadGet contact
sendlane_list_unsubscribed_contactsreadList unsubscribed contacts
sendlane_get_contact_subscriptionsreadGet contact subscriptions
sendlane_get_contact_tagsreadGet contact tags
sendlane_get_contact_custom_fieldsreadGet contact custom fields
sendlane_list_tagsreadList tags
sendlane_get_tagreadGet tag
sendlane_list_tag_contactsreadList contacts with a tag
sendlane_list_custom_fieldsreadList custom fields
sendlane_list_segmentsreadList segments
sendlane_list_segment_contactsreadList contacts of a segment
sendlane_list_campaignsreadList campaigns
sendlane_get_campaignreadGet campaign
sendlane_get_campaign_reportreadGet campaign report
sendlane_list_sms_messagesreadList SMS messages
sendlane_get_sms_reportreadGet SMS report
sendlane_list_sender_profilesreadList sender profiles
sendlane_create_listwriteCreate list
sendlane_update_listwriteUpdate list
sendlane_add_contacts_to_listwriteAdd contacts to a list
sendlane_remove_contact_from_listwriteRemove a contact from a list
sendlane_unsubscribe_contactwriteUnsubscribe a contact
sendlane_create_tagwriteCreate tag
sendlane_add_contact_tagswriteTag a contact
sendlane_remove_contact_tagwriteUntag a contact
sendlane_set_contact_custom_fieldswriteSet contact custom fields
sendlane_usage_statusmetaUsage status (free-tier meter)
sendlane_request_featuremetaRequest a missing feature
sendlane_upgrademetaUpgrade to Pro or Pro+
sendlane_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with sendlane_upgrade (it returns a Stripe Checkout link). Cancel any time with sendlane_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running sendlane_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by Sendlane.

PopNxに聞く