プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Shiftbase MCP by usefulapi

作者:m190バージョン 1.26.3i★ –iクラウドで動く
レジストリ名io.usefulapi/shiftbase

インストール

概要

作者による説明(英語の原文)

Read Shiftbase rosters, timesheets, absences and availability; schedule shifts and review absences.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://shiftbase.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http shiftbase https://shiftbase.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "shiftbase": {
      "url": "https://shiftbase.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "shiftbase": {
      "type": "http",
      "url": "https://shiftbase.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://shiftbase.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • shiftbase_get_account

    The Shiftbase account this API key belongs to: company, country, time zone, working-day start/end, plan facts. GET /accounts.

  • shiftbase_list_users

    List employees (users) with their teams and departments, contact details, employee number, start/end dates and plus-min hours balance. Use it to map user ids in schedules, timesheets and absences to names. Identity, bank and birth data are never returned. GET /users.

  • shiftbase_get_user

    One employee by user id or email address, with teams and departments. GET /users/{identifier}.

  • shiftbase_list_departments

    List departments (sites/branches that own teams, shifts and schedules) with address and timesheet/clocking settings. GET /departments.

  • shiftbase_list_teams

    List teams (the rows of the schedule within a department), optionally for one department. GET /teams.

  • shiftbase_list_locations

    List active locations (addresses that group departments). GET /locations.

  • shiftbase_list_shift_types

    List shift types (the templates a scheduled shift uses: name, short name, default start/end time and break), optionally for one department. Their ids are the shift_id for shiftbase_create_roster. GET /shifts.

  • shiftbase_list_rosters

    List the schedule (rosters = shifts assigned to employees) for a date range of at most 62 days: date, start/end time, break, employee, team, shift type, department, published state, hours and cost. Each item's occurrence_id identifies it for shiftbase_get_roster and shiftbase_upd

  • shiftbase_get_roster

    One scheduled shift by its occurrence_id, with the employee, shift type, team and who created/changed it. GET /rosters/{occurrenceId}.

  • shiftbase_list_open_shifts

    List open (unassigned) shifts that employees can pick up, for a date range of at most 62 days (default: today). Needs the Basic plan or higher. GET /open_shifts.

  • shiftbase_get_availability

    Employee availability (available / unavailable, all day or from a time) for a date range of at most 62 days, from Shiftbase's availability report. Needs the Basic plan and the "View reports" permission. POST /reports/availability (export json; reads only).

  • shiftbase_list_timesheets

    List timesheets (worked hours: clock in/out, breaks, total, status Approved/Declined/Pending, wage and surcharges) for a date range of at most 62 days. GET /timesheets.

  • shiftbase_get_timesheet

    One timesheet by id, with its clocked breaks. GET /timesheets/{timesheetId}.

  • shiftbase_list_clocked_in

    Who is clocked in right now: employee, since when, their scheduled shift, team, department and location. GET /timesheets/clock.

  • shiftbase_list_absences

    List absences (leave, sick leave, other time off) overlapping a date range of at most 366 days: employee, absence type, start/end date, hours or days, status Approved/Declined/Pending and who reviewed it. Needs the Basic plan. GET /absentees.

  • shiftbase_get_absence

    One absence by id, with the per-day hours and who reviewed it. GET /absentees/{absenteeId}.

  • shiftbase_list_absence_types

    List absence types (e.g. Holiday, Sick, Unpaid leave): name, unit (hours or days), whether it costs leave hours, colour. Their ids are the absence_type_id for absences. GET /absentee_options.

  • shiftbase_get_expected_absence_hours

    How many hours an absence would cost for an employee, per day and in total (from the schedule or the contract, per the absence policy), for a period of at most 366 days. Changes nothing. POST /absentees/expected.

  • shiftbase_create_roster

    WRITE: put one employee on the schedule for one date (a single, non-recurring shift) in a team, with a shift type, start/end time and break. The employee is notified only when notify is true. POST /rosters.

  • shiftbase_update_roster

    WRITE: change a scheduled shift: move it to another date, time, employee, team or shift type, or change its break or note. Reads the shift first and sends it back with your changes. For a recurring shift, scope says what changes: "occurrence" (this date only), "sequence" (this da

  • shiftbase_request_absence

    WRITE: add an absence (leave/time-off request) for an employee. By default it is a Pending request for a manager to review; status Approved books it directly (needs the approve-absence permission). The hours per day come from Shiftbase's own expected-hours calculation (the same a

  • shiftbase_review_absence

    WRITE: approve or decline an absence request. Reads the absence first and sends it back unchanged except for the status (needs the approve-absence permission). PUT /absentees/{absenteeId}.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    398ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    22件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32398件のうち0%よりスターが多い
  • このカテゴリのほかの32398件のうち97%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32398件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Shiftbase MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.26.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, AI Deprecations

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211昨日更新
インストール

AI Deprecations

作者:aideprecations.com

AI model shutdown dates, replacements, change feed and webhook alerts for 8 providers.

クラウドで動く今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Shiftbase MCP by usefulapi

Use Shiftbase from Claude, Cursor, or any MCP client — read Shiftbase rosters, timesheets, absences and availability; schedule shifts and review absences. Hosted, no local install: connect with your own Shiftbase credentials.

Live endpoint: https://shiftbase.usefulapi.io/mcp · Homepage: https://usefulapi.io/shiftbase

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://shiftbase.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http shiftbase https://shiftbase.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "shiftbase": { "url": "https://shiftbase.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Shiftbase credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/shiftbase/

On first connect you'll provide your Shiftbase API key. Your credentials are validated, stored per-user, and scoped to you — no keys in config files.

Tools

ToolTypeWhat it does
shiftbase_get_accountreadGet account
shiftbase_list_usersreadList employees
shiftbase_get_userreadGet employee
shiftbase_list_departmentsreadList departments
shiftbase_list_teamsreadList teams
shiftbase_list_locationsreadList locations
shiftbase_list_shift_typesreadList shift types
shiftbase_list_rostersreadList scheduled shifts
shiftbase_get_rosterreadGet scheduled shift
shiftbase_list_open_shiftsreadList open shifts
shiftbase_get_availabilityreadGet employee availability
shiftbase_list_timesheetsreadList timesheets
shiftbase_get_timesheetreadGet timesheet
shiftbase_list_clocked_inreadList clocked-in employees
shiftbase_list_absencesreadList absences
shiftbase_get_absencereadGet absence
shiftbase_list_absence_typesreadList absence types
shiftbase_get_expected_absence_hoursreadGet expected absence hours
shiftbase_create_rosterwriteSchedule a shift
shiftbase_update_rosterwriteChange a scheduled shift
shiftbase_request_absencewriteRequest an absence
shiftbase_review_absencewriteApprove or decline an absence
shiftbase_usage_statusmetaUsage status (free-tier meter)
shiftbase_request_featuremetaRequest a missing feature
shiftbase_upgrademetaUpgrade to Pro or Pro+
shiftbase_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per account)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with shiftbase_upgrade (it returns a Stripe Checkout link). Cancel any time with shiftbase_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running shiftbase_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by Shiftbase.

PopNxに聞く