プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Trengo MCP by usefulapi

作者:m190バージョン 1.35.3i★ –iクラウドで動く
レジストリ名io.usefulapi/trengo

インストール

概要

作者による説明(英語の原文)

Work tickets and messages, look up contacts and teams, pull reports, and reply, assign or close.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://trengo.usefulapi.io/mcp

ターミナルでこれを実行します

claude mcp add --transport http trengo https://trengo.usefulapi.io/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "trengo": {
      "url": "https://trengo.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "trengo": {
      "type": "http",
      "url": "https://trengo.usefulapi.io/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://trengo.usefulapi.io/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • trengo_list_tickets

    List tickets (conversations) visible to the token's user, newest activity first, with channel and latest message. Filter by status, contact, assignee, channel, label, last message direction or update time. Trengo: GET /tickets.

  • trengo_list_ticket_messages

    List the messages of one ticket — inbound, outbound and internal notes — with the contact or agent behind each. Trengo: GET /tickets/{ticket_id}/messages.

  • trengo_get_email_message

    Fetch the full email behind one message of a ticket: original HTML body, from, to, subject and Message-ID. The message must be an email message. Trengo: GET /tickets/{ticket_id}/full_email_messages/{message_id}.

  • trengo_list_contacts

    List contacts, or search them by name, email or phone number. Trengo: GET /contacts.

  • trengo_get_contact

    Fetch one contact with name, email, phone and custom field data, optionally with notes. Trengo: GET /contacts/{id}.

  • trengo_list_contact_groups

    List the contact groups in the account — use their ids with trengo_update_contact. Trengo: GET /contact_groups.

  • trengo_list_users

    List the agents (users) in the Trengo account — use their ids to assign tickets or filter. Trengo: GET /users.

  • trengo_list_teams

    List the teams in the account — use their ids to assign tickets to a team. Trengo: GET /teams.

  • trengo_list_labels

    List the ticket labels (tags) in the account, for filtering tickets and reports. Trengo: GET /labels.

  • trengo_list_ticket_results

    List the ticket results (closing outcomes, e.g. 'Resolved', 'Sale') that can be applied when closing a ticket. Trengo: GET /ticket_results.

  • trengo_list_custom_fields

    List the custom fields defined for tickets, contacts and profiles. Trengo: GET /custom_fields.

  • trengo_list_quick_replies

    List the saved quick replies (canned responses), optionally only the messaging or email ones — useful for drafting consistent answers. Trengo: GET /quick_replies.

  • trengo_get_reporting_metrics

    Aggregate support metrics over a period: new, created, assigned, closed and reopened tickets, average first response time and average total resolution time (seconds). Filter by team, channel, label or direction. Trengo: GET /reporting/metrics.

  • trengo_get_agent_performance

    Per-agent performance over a period: messages sent, notes, tickets assigned and closed, average first response and resolution times (with and without business hours). Trengo: GET /reporting/agent_performance.

  • trengo_get_ticket_details_report

    Per-ticket reporting rows: status, assignee, labels, first reply, first resolution and total resolution times (with and without business hours). Filter by team, channel, label, direction, status and created/closed/assigned date ranges; sort by a timing metric. For large accounts

  • trengo_create_ticket

    Open a new ticket for an existing contact on a channel. Nothing is sent to the customer until you post a message with trengo_send_ticket_message. Trengo: POST /tickets.

  • trengo_assign_ticket

    Assign a ticket to a user or a team, with an optional assignment note. Reversible by reassigning. Trengo: POST /tickets/{ticket_id}/assign.

  • trengo_close_ticket

    Close a ticket, optionally applying a ticket result (see trengo_list_ticket_results). Reversible with trengo_reopen_ticket. Trengo: POST /tickets/{ticket_id}/close.

  • trengo_reopen_ticket

    Reopen a closed ticket. Trengo: POST /tickets/{ticket_id}/reopen.

  • trengo_send_ticket_message

    Post a message on a ticket. With internal_note=true it is an internal note visible only to agents. OTHERWISE IT IS DELIVERED TO THE CUSTOMER on the ticket's channel (email, WhatsApp, chat...) and cannot be recalled — confirm the text first. Trengo: POST /tickets/{ticket_id}/messa

  • trengo_create_contact

    Create a contact on a channel. The identifier is the contact's address on that channel: an email address for email channels, a phone number for WhatsApp/SMS/voice. Trengo: POST /channels/{channel_id}/contacts.

  • trengo_update_contact

    Rename a contact and/or set the contact groups it belongs to. contact_group_ids REPLACES the contact's groups. Trengo: PUT /contacts/{id}.

  • trengo_create_board_card

    Create a card (e.g. a deal or task) in a stage of a Trengo board. The board id is in the board's URL in Trengo. Trengo: POST /boards/{boardId}/cards.

  • trengo_update_board_card

    Partially update a board card: rename it, move it to another stage, or set its users (owners) and contacts (leads). user_ids / contact_ids replace the current sets. Trengo: PUT /boards/{boardId}/cards/{cardId}.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月6日にチェック

  • ✓ 合格

    作者とリポジトリが一致

    レジストリ名はドメイン usefulapi.io で確認済みです(レジストリがドメインの所有を確認しています)

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    14ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    24件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの32417件のうち0%よりスターが多い
  • このカテゴリのほかの32417件のうち97%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの32417件のうち100%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Trengo MCP by usefulapiは安全ですか?

当てはまる基本チェック3項目のうち3項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.35.3)がレジストリに届いたのは昨日です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, FOGA node

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Remote Desktop Commander

作者:desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

クラウドで動く★ 211昨日更新
インストール

FOGA node

作者:garyyang-finchip

A Finch OG Agent cell as an MCP server: read the world, dry-run and take ERC-8414 tenders by policy.

パソコンでもクラウドでも今日更新
インストール

作者のREADME

READMEを開く

作者のリポジトリから書かれたとおりにコピーしたものです。PopNx MCPは内容を確認・推奨していません。HTML、画像、スクリプトは取り除いています。リンクはこのサイトの外へ移動します。

Trengo MCP by usefulapi

Use Trengo from Claude, Cursor, or any MCP client — read tickets and messages, look up contacts, users, teams and labels, pull support reports, and reply, assign, close or reopen tickets. Hosted, no local install: connect with your own Trengo credentials.

Live endpoint: https://trengo.usefulapi.io/mcp · Homepage: https://usefulapi.io/trengo

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://trengo.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http trengo https://trengo.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "trengo": { "url": "https://trengo.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Trengo credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/trengo/

On first connect you'll provide your Trengo personal access token (Settings → Apps & integrations → Rest API). They're validated, stored per-user, and scoped to you — no keys in config files.

Tools

ToolTypeWhat it does
trengo_list_ticketsreadList tickets
trengo_list_ticket_messagesreadList a ticket's messages
trengo_get_email_messagereadGet an email message
trengo_list_contactsreadList or search contacts
trengo_get_contactreadGet a contact
trengo_list_contact_groupsreadList contact groups
trengo_list_usersreadList users
trengo_list_teamsreadList teams
trengo_list_labelsreadList labels
trengo_list_ticket_resultsreadList ticket results
trengo_list_custom_fieldsreadList custom fields
trengo_list_quick_repliesreadList quick replies
trengo_get_reporting_metricsreadGet reporting metrics
trengo_get_agent_performancereadGet agent performance
trengo_get_ticket_details_reportreadGet ticket details report
trengo_create_ticketwriteCreate a ticket
trengo_assign_ticketwriteAssign a ticket
trengo_close_ticketwriteClose a ticket
trengo_reopen_ticketwriteReopen a ticket
trengo_send_ticket_messagewriteSend a ticket message
trengo_create_contactwriteCreate a contact
trengo_update_contactwriteUpdate a contact
trengo_create_board_cardwriteCreate a board card
trengo_update_board_cardwriteUpdate a board card
trengo_usage_statusmetaUsage status (free-tier meter)
trengo_request_featuremetaRequest a missing feature
trengo_upgrademetaUpgrade to Pro or Pro+
trengo_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with trengo_upgrade (it returns a Stripe Checkout link). Cancel any time with trengo_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running trengo_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by Trengo.

PopNxに聞く