プロトタイプ · プレビュー版:公式レジストリのすべてのサーバーを掲載し、30分ごとに同期しています。レビューとアカウント機能は今後のステップで始まります。
PopNx MCPAIを使う人のためのMCPサーバー · やさしい言葉で解説

Control Your Tesla

作者:control-your-tesla.vercel.appバージョン 1.0.0i★ –iクラウドで動く
レジストリ名app.vercel.control-your-tesla/control-your-tesla

インストール

概要

作者による説明(英語の原文)

AI for your car: check charge, start climate, lock/unlock, open trunk via Tesla Fleet API. OAuth.

PopNx MCPの3つの柱

この3つを1つのスコアにまとめることはしません。意見、測定、人気はそれぞれ別のものだからです。

できること

このサーバーのやさしい解説はまだ書いていません。以下はレジストリから読み取った事実です。

  • 接続方法: クラウドで動く
  • トランスポート: Streamable HTTP
  • カテゴリ: その他

インストール

使っているAIアプリを選んで、設定をコピーしてください。

インストールの前に

必要なもの

どのアプリを使っていますか?

上でアプリを選んでください。選んだアプリを覚えておくので、次からはボタンに「…にインストール」と表示されます。

ウェブ、デスクトップ、モバイルのClaudeで使えます:

  1. Settings → Connectors を開く
  2. Add custom connector を押す
  3. 下のアドレスを貼り付けて Add を押す
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Add2https://…3
https://control-your-tesla.vercel.app/mcp

ターミナルでこれを実行します

claude mcp add --transport http control-your-tesla https://control-your-tesla.vercel.app/mcp

Cursorで開く

または、設定を自分でコピーする

プロジェクトの .cursor/mcp.json、または ~/.cursor/mcp.json に貼り付けます

{
  "mcpServers": {
    "control-your-tesla": {
      "url": "https://control-your-tesla.vercel.app/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

VS Codeで開く

または、設定を自分でコピーする

プロジェクトの .vscode/mcp.json に貼り付けます

{
  "servers": {
    "control-your-tesla": {
      "type": "http",
      "url": "https://control-your-tesla.vercel.app/mcp"
    }
  }
}

ブラウザがアプリを開いてよいか確認し、そのあとアプリが設定を表示して確認を求めます。キーの値は空欄のままなので、自分で入力してください。

ChatGPTがつなげるのは、インターネット上のサーバーだけです:

  1. ウェブ版のChatGPTを開き → Settings → Connectors (Apps)
  2. Create または Add を押す(プランによっては、先に Advanced で Developer mode をオンにする必要があります)
  3. 下のアドレスを貼り付け、名前を付けて保存する
  4. サインインを求められたら、作者のサービスにサインインする
SettingsConnectors1+ Create2https://…3
https://control-your-tesla.vercel.app/mcp

メニューの名前は、プランや時期によって少し違うことがあります。

選んだアプリは、この端末のCookieに保存されます。アカウントは不要です。

この設定は、作者のレジストリ登録情報から作成しています。READMEと違う場合は、READMEに従ってください。

できること

ツールの名前と説明は、サーバーが2026年11月6日に返したそのままの内容です。書いたのは作者で、私たちではありません。プレーンテキストとして表示しています。

  • get_setup_status

    Returns the current onboarding step, completed items, blockers, the next tool name, owner-facing instruction text, the exact link to open, and the /connect fallback URL.

  • start_account

    Creates or attaches an account for this setup session. Accepts the owner's email. Returns whether a sign-in email was sent and the /connect fallback URL.

  • start_tesla_oauth

    Starts Tesla sign-in and returns the hosted OAuth start URL (which redirects to Tesla's documented authorize endpoint) plus owner-facing instruction text. Later get_setup_status calls report denied, expired, or missing-scope failures.

  • verify_vehicle

    Reports whether the connected car is reachable from cached state and fleet_status (asleep, offline, or unsupported). Does not count as a wake.

  • subscribe

    Returns a single hosted Stripe Checkout URL or one-tap pay page for the owner to open. Yearly starts a 7-day trial (card required). Monthly charges on the first successful checkout. This tool does not collect or charge a card in the chat.

  • get_pricing

    Lists Standard and Plus monthly and yearly prices, allowances, trial length, and checkout URLs. Yearly includes a 7-day trial. Payment happens on the hosted Stripe page the owner opens.

  • create_checkout

    Creates a hosted Stripe Checkout session for a plan. Interval defaults to year (7-day trial). Returns the URL for the owner to open.

  • get_subscription_status

    Returns trial/active/none billing state, remaining usage, and whether vehicle tools are gated.

  • cancel_subscription

    Cancels the owner's subscription at the end of the current period. Access stays until then.

  • get_customer_portal

    Returns a Stripe Customer Portal URL where the owner can cancel, update the card, or download invoices.

  • list_vehicles

    Lists vehicles linked to this account after Tesla OAuth and an active trial or subscription. A setup_incomplete error means onboarding is not finished; get_setup_status reports the remaining step.

  • get_vehicle_state

    Returns vehicle state (charge, climate, lock, location) from a short cache, or a metered vehicle_data read on miss. Does not wake the car.

  • get_battery_and_range

    Returns battery percent, rated range, charge limit, and charging state. Uses the short cache; a miss is a metered vehicle_data read. Does not wake the car.

  • nearest_superchargers

    Returns nearby Superchargers from the last cached location. Does not wake the car.

  • get_virtual_key_status

    Reports whether the virtual key is paired. If not, returns the official tesla.com/_ak pairing link and owner-facing pairing steps. Approving Third-Party Apps is not the same as pairing the key.

  • lock_vehicle

    Locks the vehicle.

  • unlock_vehicle

    Unlocks the vehicle. Requires confirm=true unless the owner disabled confirmations. Blocked in read-only mode.

  • actuate_trunk

    Opens or closes the rear trunk or front trunk (frunk). Opening requires confirm=true when confirmations are on.

  • set_climate

    Starts or stops cabin climate / preconditioning.

  • set_seat_heater

    Sets a seat heater level (0-3). Climate on usually works better.

  • set_charge

    Starts or stops charging, or sets the charge limit percent.

  • honk_horn

    Honks the horn. The vehicle must be in park.

  • flash_lights

    Flashes the headlights. The vehicle must be in park.

  • remote_start

    Remote-starts the vehicle. Requires confirm=true when confirmations are on. Blocked in read-only mode.

  • wake_vehicle

    Wakes the vehicle. Cached reads do not need a wake. Wakes count against the monthly allowance.

  • get_vehicle_summary

    Returns a vehicle snapshot: online/asleep, battery, range, lock, climate, sentry, and last location. Uses a short cache; a miss is a metered vehicle_data read. Does not wake the car.

  • get_charging_status

    Returns charging status: percent, limit, plugged in, power, and minutes to full. Uses a short cache; a miss is a metered vehicle_data read. Does not wake the car.

  • get_charging_history

    Returns recent charging sessions (home, Supercharger, destination) with kWh and cost when Tesla reports it. Does not wake the car.

  • get_energy_usage

    Returns Powerwall / solar live status and calendar history when the owner has an energy site. Does not wake the car.

  • get_location

    Returns latitude/longitude plus a human place name when one can be resolved. Uses a short cache; a miss is a metered vehicle_data read. Does not wake the car.

  • share_destination

    Sends a destination to the car from address text and/or lat/lon. Returns the command confirmation and cached vehicle state.

  • set_charge_limit

    Sets the charge limit percent (50–100). Out-of-range values return invalid_arguments.

  • set_scheduled_departure

    Enables or disables scheduled departure (minutes past midnight). Optionally keeps preconditioning on.

  • set_sentry_mode

    Turns Sentry Mode on or off.

基本チェックi

誰でも見られる情報をチェックしており、コードは読んでいません。当てはまらない項目は数に入れていません。 · 2026年11月8日にチェック

  • ! 注意

    作者とリポジトリが一致

    レジストリにソースのリポジトリが載っていないため、公開者(control-your-tesla.vercel.app)とコードを照合できません

  • … 未チェック

    今もメンテナンスされている

    このリポジトリはまだGitHubから読み取っていません

  • … 未チェック

    ライセンスがある

    このリポジトリはまだGitHubから読み取っていません

  • ✓ 合格

    エンドポイントが応答する

    971ミリ秒で応答(HTTP 200)

  • – 対象外

    OAuthでサインイン

    サインイン不要

  • ✓ 合格

    ツールの説明に隠れた指示がない

    34件のツールの説明を読み、AIへの隠れた指示は見つかりませんでした

その他のほかのサーバーとの比較i

  • このカテゴリのほかの18444件のうち0%よりスターが多い
  • このカテゴリのほかの18444件のうち93%より最近レジストリに公開
  • 基本チェックの結果が、このカテゴリのほかの18444件のうち36%と同じかそれ以上

レジストリでこのカテゴリにある有効なすべてのサーバーと比較しています。スターは、公開者がリポジトリの所有者である場合だけ数えます。

よくある質問

Control Your Teslaは安全ですか?

当てはまる基本チェック3項目のうち2項目に合格しました。コードは読んでいません。キーやトークンを追加する前に、サーバーがどんなアクセスを求めているかを確認し、必要な権限だけを持つキーを使ってください。

どんなキーやコードが必要ですか?

レジストリには必須のキーは載っていません。ただし、最初に使うときにサインインを求めるサーバーもあります。

パソコンで動きますか、それともクラウドですか?

作者のクラウドで動きます。インストール不要でインターネット経由でつながりますが、送った内容は作者のサーバーを通ります。

今もメンテナンスされていますか?

GitHubリポジトリの最終更新は–、最新バージョン(1.0.0)がレジストリに届いたのは3 日前です。

どのアプリで使えますか?

Claude Desktop、Claude Code、Cursor、VS CodeなどのMCP対応アプリで使えます。URLでつながるので、リモートMCPサーバーに対応したアプリ(開発者モードのChatGPTなど)でも使えます。

代わりに使えるものは?

同じカテゴリには:Spec Driven Development, Remote Desktop Commander, Egovframe Scaffold MCP

代わりの候補

同じカテゴリで、ほかの作者が作ったサーバー。スターの多い順。

カードの見方:↓ 週あたりのダウンロードi★ GitHubスターi3つの柱:レビュー · チェック · 利用状況i更新=最新バージョンをレジストリに公開した日i

Spec Driven Development

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

作者:formulahendry初期↓ 66/週★ 44014 か月前更新

パソコンで動く

Remote Desktop Commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

作者:desktop-commander成長中★ 2113 日前更新

クラウドで動く✓ desktopcommander.app

Egovframe Scaffold MCP

eGovFrame (전자정부 표준프레임워크) projects: templates, components, CRUD, build, 5.x migration, dependencies

作者:EricSeokgon初期↓ 1440/週今日更新

パソコンで動く

作者のREADME

リポジトリにREADMEが見つかりません

PopNxに聞く