World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Boot and drive QEMU VMs from an AI agent: keys, screenshots, serial. No guest agent.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 9/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 21/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Qemu MCP 설치해 줘. https://mcp.popnx.com/i/0xmortuex-qemu-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 13일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Qemu MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "qemu": { "command": "uvx", "args": [ "qemu-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Qemu MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"qemu": {
"command": "uvx",
"args": [
"qemu-mcp"
]
}
}
}Qemu MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Qemu MCP을 쓰고 있다고 하거나 답에 Qemu MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Qemu MCP에 연결할 수 없어요
Qemu MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Qemu MCP에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Qemu MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user qemu -- uvx qemu-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Qemu MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user qemu -- uvx qemu-mcpQemu MCP이 목록에 있고 연결됨으로 보이면 돼요
Qemu MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Qemu MCP을 쓰고 있다고 하거나 답에 Qemu MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Qemu MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "qemu": { "command": "uvx", "args": [ "qemu-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Qemu MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Qemu MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Qemu MCP을 쓰고 있다고 하거나 답에 Qemu MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Qemu MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "qemu": { "type": "stdio", "command": "uvx", "args": [ "qemu-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Qemu MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Qemu MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Qemu MCP을 쓰고 있다고 하거나 답에 Qemu MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user qemu -- uvx qemu-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"qemu": {
"command": "uvx",
"args": [
"qemu-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"qemu": {
"command": "uvx",
"args": [
"qemu-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"qemu": {
"type": "stdio",
"command": "uvx",
"args": [
"qemu-mcp"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 18일 점검
레지스트리 이름이 GitHub 계정 0xmortuex 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 어제
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 qemu-mcp@0.1.0 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/0xmortuex-qemu-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(0.1.0)은 11일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 Qemu MCP | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Let your AI agent boot an operating system and drive it.
qemu-mcp is an MCP server that gives AI agents (Claude Code, or any MCP client) hands on a QEMU virtual machine: boot an ISO or a raw kernel, press keys, take screenshots, read the serial console, and wait for boot markers — all headless, with zero cooperation from the guest. No SSH, no guest agent, no network. If it boots in QEMU, an agent can drive it.
*This screenshot was taken by an AI agent: it booted MORT OS (a hobby kernel with no SSH, no agent, no TCP required) headless, pressed Esc, typed help, and captured the framebuffer — four tool calls.*
OS developers and hobby kernel hackers. The osdev inner loop is: edit kernel → build → boot in QEMU → *look at the screen* → type something → read serial → repeat. An AI agent can already do the edit and build steps; qemu-mcp gives it the rest of the loop, so it can boot-test its own kernel changes and actually see the triple fault.
It's equally useful for anyone who needs an agent to poke at a VM below the OS level: bootloaders, installers, BIOS/UEFI menus, recovery consoles, firmware.
The existing ones assume a *full, running guest OS* — they exec commands over SSH or a guest agent. That's useless when your guest is a 40 KB kernel you wrote yourself, an installer ISO, or anything pre-boot. qemu-mcp is built for the boot-test loop instead:
qemu_serial), and writable too (qemu_serial_send)"kernel ready" (or "login:", or your panic string) appears, the reliable way to sequence an automated boot testappend/initrdmemsave, system_reset, device_add…| Tool | What it does |
|---|---|
qemu_boot | Boot a VM headless from iso, kernel (+append/initrd), and/or disk. Any arch QEMU supports (x86_64, i386, aarch64, riscv64…), an optional machine (QEMU -M, required on some archs), an optional smp (QEMU -smp, number of virtual CPUs, for testing SMP-aware guest code) plus optional smp_cores/smp_threads/smp_sockets/smp_maxcpus (QEMU -smp topology qualifiers cores=/threads=/sockets=/maxcpus= combined onto the same flag, for shaping a guest's CPU topology rather than just its total count), an optional accel (QEMU -accel, e.g. "kvm:tcg"/"hvf:tcg"/"whpx:tcg", to opt into hardware acceleration), an optional cpu (QEMU -cpu, e.g. "qemu64,+avx"/"max"/"host", to select or customize the emulated CPU model for testing a specific feature set), an optional hostfwd (QEMU's hostfwd rule, e.g. "tcp::2222-:22", to reach a guest service like SSH from the host without needing QEMU's own NIC/chipset flags), arbitrary extra QEMU args (networking, devices…), and overridable qmp_connect_timeout_s/qmp_read_timeout_s for slow hosts or long-running QMP commands |
qemu_version | Report the installed qemu-system- --version output, without booting a VM |
qemu_machines | Report qemu-system- -M help output: every valid qemu_boot machine value for that arch, without booting a VM |
qemu_cpu_models | Report qemu-system- -cpu help output: every valid qemu_boot cpu value for that arch, without booting a VM |
qemu_disk_create | Create a fresh disk image via qemu-img create (format "qcow2"/"raw", size like "10G"), ready for qemu_boot's disk param — qemu_boot never creates one itself |
qemu_screenshot | PNG of the guest's display, straight from the framebuffer |
qemu_type | Type text as keyboard input (\n = Enter, shifted symbols handled, tunable keystroke delay) |
qemu_key | Press a key or chord: enter, esc, f12, ctrl-alt-f2… |
qemu_mouse | Move the absolute pointer (fractions of screen width/height) and optionally click left/right/middle, scroll with wheel-up/wheel-down/wheel-left/wheel-right, or press a 5-button mouse's side/extra buttons |
qemu_pause | Pause the VM's execution (QMP stop) without exiting QEMU — RAM/device state stay frozen until qemu_resume. Useful for inspecting a VM without guest time advancing, or for a guaranteed-consistent qemu_snapshot_save |
qemu_resume | Resume a VM previously paused with qemu_pause (QMP cont) |
qemu_snapshot_save | Save a full RAM+device snapshot under a tag (needs a qcow2 disk). Reports failure if QEMU's savevm rejects it (e.g. a raw disk) instead of claiming success |
qemu_snapshot_load | Restore a VM to a previously saved snapshot tag. Reports failure if QEMU's loadvm rejects it (e.g. an unknown tag) instead of claiming success |
qemu_snapshot_delete | Delete a previously saved snapshot tag, freeing its space in the qcow2 disk. Reports failure if QEMU's delvm rejects it (e.g. an unknown tag) instead of claiming success |
qemu_snapshot_list | List snapshot tags saved on the VM's qcow2 disk (raw info snapshots output), so you can see what's available before loading or deleting one |
qemu_change_media | Swap the medium in a removable drive (e.g. a CD-ROM) without rebooting. device is the block backend's id/QOM path, found via qemu_qmp(name, "query-block") — not guessable, since it depends on the machine type/QEMU version |
qemu_serial | Tail the serial console (COM1) output — works after the VM has exited too, to see what it printed right before dying |
qemu_serial_send | Write text to the serial console (COM1) |
qemu_wait_serial | Block until given text appears on serial, or timeout. Each wait only searches output after the previous match, so waiting for a prompt after a command finds the new one (from_start=True searches the whole log) |
qemu_wait_screen | Block until the display stops changing (for VGA-only guests with no serial output), or timeout. A blinking text cursor counts as settled (max_changed_pixels, default 64) |
qemu_list | All managed VMs with state, arch, machine, hostfwd, pid, uptime. A VM paused via qemu_pause shows as running (paused) |
qemu_stop | Graceful ACPI powerdown, or force=true to kill. graceful_timeout_s/kill_timeout_s override the default 10s/3s waits |
qemu_qmp | Run any raw QMP command on the VM |
Multiple named VMs can run at once.
Every tool declares all four MCP behaviour hints, so your client knows which calls to confirm with you. Only the waiting and reading tools (qemu_screenshot, qemu_serial, qemu_wait_serial, qemu_wait_screen, qemu_snapshot_list, qemu_version, qemu_machines, qemu_cpu_models) are read-only. qemu_boot and qemu_list are marked destructive because they clean up VMs that exited on their own, deleting their serial logs; read a crashed guest's output with qemu_serial first. qemu_boot and qemu_qmp are open-world: extra_args and raw QMP can reach anything QEMU can.
Requirements: Python 3.10+, and QEMU on your PATH (on Windows, C:\Program Files\qemu is found automatically, or set QEMU_DIR).
pip install qemu-mcp
Claude Code:
claude mcp add qemu -- qemu-mcp
Any other MCP client (stdio transport):
{
"mcpServers": { "qemu": { "command": "qemu-mcp" } } }
Or without installing, via uv: claude mcp add qemu -- uvx qemu-mcp
you: boot build/os.iso and check the shell works
agent:
qemu_boot(name="test", iso="build/os.iso", arch="i386")→ booted
qemu_wait_serial(name="test", text="boot ok")→ FOUND
qemu_type(name="test", text="help\n")
qemu_screenshot(name="test")→ *sees the help output rendered*
qemu_stop(name="test", force=true)
"Your ISO boots, the shell responds to
help, and the new command is listed. Screenshot attached."
A typical kernel test the agent can run by itself:
qemu_boot(name="k", kernel="build/kernel.elf", arch="i386",
extra_args="-device rtl8139,netdev=n0 -netdev user,id=n0") qemu_wait_serial(name="k", text="MORTNET READY", timeout_s=20) qemu_serial_send(name="k", text="net\n") # guest has no keyboard driver, only a serial shell qemu_serial(name="k") # did DHCP bind? qemu_screenshot(name="k") # what does the console show?
x86_64 and i386 boot with no machine argument. Other archs have no default machine in QEMU and need -M set explicitly, or they'll fail to boot:
qemu_boot(name="a", kernel="build/kernel-aarch64.elf", arch="aarch64", machine="virt")
qemu_boot(name="r", kernel="build/kernel-riscv64.elf", arch="riscv64", machine="virt")
Run qemu_machines(arch="aarch64") for the full list of machines an arch supports — it reports qemu-system- -M help's own output without needing a shell.
virt has no default display device — unlike the PC-family boards x86_64/ i386 boot with, it doesn't wire up VGA on its own. qemu_screenshot/ qemu_wait_screen against a virt VM will see an empty/black framebuffer (or a QMP error, depending on QEMU version) unless the guest itself sets one up, which most bare-metal aarch64/riscv64 kernels don't. Add a display device explicitly if you need screenshots:
qemu_boot(name="a", kernel="build/kernel-aarch64.elf", arch="aarch64",
machine="virt", extra_args="-device virtio-gpu-pci")
(This is documented QEMU virt-board behavior, not verified against a real boot in this environment — no QEMU available here.)
qemu_boot defaults to TCG (QEMU's software emulator) with no accel given - correct on any host, but a real slowdown for anything beyond a trivial kernel. Opt into your host's accelerator with accel, falling back to TCG if it's unavailable so the boot doesn't hard-fail on a host without it:
qemu_boot(name="fast", kernel="build/kernel.elf", accel="kvm:tcg") # Linux
qemu_boot(name="fast", kernel="build/kernel.elf", accel="hvf:tcg") # macOS qemu_boot(name="fast", kernel="build/kernel.elf", accel="whpx:tcg") # Windows
If the requested accelerator genuinely isn't usable on the host (no /dev/kvm permission, virtualization disabled in firmware, etc.) QEMU itself reports why QEMU exited, and qemu_boot surfaces that in the error it raises.
qemu_boot defaults to QEMU's own default CPU model for the arch/machine. Pass cpu (QEMU -cpu) to test guest code against a specific model or feature set instead:
qemu_boot(name="k", kernel="build/kernel.elf", cpu="qemu64,+avx") # base model + one extra feature
qemu_boot(name="k", kernel="build/kernel.elf", cpu="max") # every feature QEMU/TCG can emulate qemu_boot(name="k", kernel="build/kernel.elf", accel="kvm", cpu="host") # pass the host CPU through under KVM
Run qemu_cpu_models(arch="x86_64") for the full list of models/features an arch supports — it reports qemu-system- -cpu help's own output without needing a shell.
smp alone sets a flat vCPU count. For guest code that cares about the socket/core/thread *shape* (ACPI MADT entries, CPUID topology leaves, per-socket vs. per-core scheduling), pass smp_cores/smp_threads/ smp_sockets/smp_maxcpus too - they're combined onto the same -smp flag:
qemu_boot(name="k", kernel="build/kernel.elf",
smp=8, smp_cores=