프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Leantime MCP (Unofficial)

제작자: 4lador버전 2.9.0i★ 0i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.4lador/leantime-mcp

설치 방법

What it does

Unofficial MCP server for Leantime: 42 agent-first tools, backup/restore, dry-run validation

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 기타

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성7/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수7/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 3/3 통과 · 내 컴퓨터에서 실행돼요

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude는 아직 Leantime MCP (Unofficial)에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

ChatGPT는 아직 Leantime MCP (Unofficial)에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

대신 이렇게 할 수 있어요

B · 기타에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code는 아직 Leantime MCP (Unofficial)에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

Cursor는 아직 Leantime MCP (Unofficial)에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

VS Code는 아직 Leantime MCP (Unofficial)에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Leantime MCP (Unofficial)을 쓰는 사람에게 물어보세요💬 토론 →

한눈에 보기

주간 다운로드i
npm/PyPI에 없음
연결 방식
내 컴퓨터에서 실행
최신 버전i
2.9.0
카테고리i
기타
레지스트리 공개i
2026년 9월 14일
코드 마지막 변경i
2026년 9월 14일
제작자
4lador
패키지
cargo: leantime-mcp
웹사이트
github.com
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

GooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 18일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 4lador 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 2개월 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

확인 안 함: 버전이 있는 npm과 PyPI 패키지만 확인할 수 있습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/4lador-leantime-mcp.svg)](https://mcp.popnx.com/en/servers/4lador-leantime-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 20575개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 20575개 중 39%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 20575개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Leantime MCP (Unofficial), 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 2개월 전 변경됐고, 최신 버전(2.9.0)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Rust도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

제작자: koala73널리 사용됨★ 9.1만그저께 업데이트

클라우드에서 실행✓ 서비스 회사 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

제작자: openstatusHQ널리 사용됨★ 9.3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

제작자: Klavis-AI성장 중★ 5.8천14개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

제작자: jitsucom널리 사용됨★ 5.1천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · jitsu.com
비슷한 항목과 비교
이 항목
Leantime MCP (Unofficial)
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/44/44/41/44/4
라이선스MITAGPL-3.0AGPL-3.0MITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

leantime-mcp

  • MCP Registry name: mcp-name: io.github.4lador/leantime-mcp

An unofficial Model Context Protocol server for Leantime, designed agent-first: it lets LLM tools (opencode, Claude Code, Claude Desktop, Cursor, Codex, or any MCP client) work on your Leantime projects through 42 tools with dry-run validation, bulk operations, backup/restore and one-call project context.

It is an independent, open-source integration — stdio only, running locally with your own API key and your own instance. It does not aim to replace Leantime's official offerings; if you want vendor-supported integrations, use those.

~3 MB self-contained binary (rustls — no system OpenSSL), ~1.2 ms median startup and ~5 MB idle memory (VmRSS after handshake — measured on a Linux x86_64 dev machine, n=100 spawns).

Documentation: Quick start · Configuration · Safety · Tools · Troubleshooting · Harness setup · Backup & recovery · Migration from v1.x · CHANGELOG · CONTRIBUTING · SECURITY

Demo

An example session (abridged):

You: What's the status of the Acme launch project?

Agent calls leantime_project_context — one call returning progress, health, sprint and milestones:

`json

{ "project": { "name": "Acme launch", "progress": { "percentDone": 64.5, "ticketsTotal": 279, "ticketsDone": 180 } },

"health": { "blocked": 0, "overdue": 7, "unassigned": 3, "openTotal": 99 },

"currentSprint": { "name": "Sprint 4", "status": "current", "daysRemaining": 6, "openTickets": 8 } }

`

Agent: Acme launch is at 64.5% (180 of 279 tickets done). 99 tickets are open — 7 overdue, 3 unassigned, none blocked. Sprint 4 ends in 6 days with 8 open tickets; the milestone in progress (PHASE 8) sits at 47.8%.

Features

  • 42 tools: projects, tickets, subtasks, milestones, sprints, comments, time tracking, bulk operations
  • leantime_project_context — the whole project picture in one call (progress, health, sprint, milestones), under 4 KB
  • dryRun: true on every mutation — same validations, from → to diffs on updates, no write requests
  • idempotencyKey on creation tools — a retried call with an already-succeeded key replays the original result instead of writing a duplicate
  • Result envelopes: structured truncated on capped lists, changed/unchanged diffs on updates — agents see what a call actually did
  • LEANTIME_MCP_PROFILE=readonly — a server-wide execution profile that removes write capabilities entirely
  • Backup retention (LEANTIME_MCP_BACKUP_RETENTION_DAYS), atomic backup writes, and a restore manifest mapping every old→new id
  • Bulk operations up to 50 items, validated upfront (all-or-nothing on creates)
  • Backup & restore — snapshot a project to local JSON, rebuild it into a new project
  • Adaptive rate-limit retries, transparent to agents
  • Credentials in a local keyring (mode 0600) — harness configs hold a bare command
  • Deletes confirm-gated; LEANTIME_MCP_DESTRUCTIVE_POLICY=deny as an emergency stop
  • Per-instance tool management — disable what you don't use, read-only mode in two commands
  • Markdown → Leantime rich HTML, converted deterministically server-side

Install

Linux / macOS (x86_64, aarch64):

curl -fsSL https://raw.githubusercontent.com/4lador/leantime-mcp/main/install.sh | sh

Windows (PowerShell):

irm https://raw.githubusercontent.com/4lador/leantime-mcp/main/install.ps1 | iex

Both installers verify the published SHA-256 checksum before installing and abort on mismatch. Release binaries cover all 5 targets — Linux (x86_64, aarch64), Windows x86_64 and macOS (Intel, ARM) — on the releases page.

Via cargo (requires the Rust toolchain):

cargo install leantime-mcp   # installs the leantmcp binary to ~/.cargo/bin

From source:

cargo build --release   # → target/release/leantmcp

Quick start

leantmcp url set https://your-instance.leantime.io   # once

leantmcp key set # once — hidden prompt leantmcp setup # writes the config leantmcp doctor # verify everything end-to-end

Your Leantime API key: My Account → API Keys → Generate on your instance.

HarnessDefault scopeConfig file
opencodeglobal~/.opencode/opencode.json
Claude Codeproject./.mcp.json
Claude Desktopglobalclaude_desktop_config.json (path per OS)
Cursorglobal~/.cursor/mcp.json
Codexglobal~/.codex/config.toml

Every generated config is a bare command with no credentials — the binary resolves them from the keyring at startup. Project-scoped setups, --scope/--instance/--name options and multiple instances: see Harness setup.

Configuration

Credentials live in named instance profiles — ~/.config/leantime/instances/ / (api-key, mode 0600, and instance-url), with a default file naming the default. The key is read from the keyring file or environment — it is not accepted as a command-line argument (shell history) and is not logged; key commands are CLI-only and are not exposed as MCP tools.

leantmcp url show          # resolved URL + where it comes from

leantmcp key show # masked display (lt_h13…Fc3O) leantmcp key test # live validation against the instance leantmcp key rotate # mint a new key (same role), verify it live, replace the stored one leantmcp instance add … # multiple Leantime instances (see Harness setup)

LEANTIME_URL / LEANTIME_API_KEY environment variables remain available as per-run overrides; LEANTIME_INSTANCE selects a profile. Resolution order: env (explicit override) → LEANTIME_INSTANCE profile → the default file.

Safety

This software is provided without warranty (MIT). It drives Leantime with your API key on your behalf — back up your Leantime data before letting agents operate on it.

  • Deletes are confirm-gated (confirm: true required by default; LEANTIME_MCP_DESTRUCTIVE_POLICY=deny refuses them outright, allow skips the gate for CI). Project hiding/deletion is intentionally not exposed.
  • Dry runs: every mutation tool accepts dryRun: true — validations run, updates resolve from → to values (with status labels), bulk tools return per-item previews, and no write request is sent. Agent guidance is built into the tool descriptions on a three-tier policy: direct execution for explicit values, dry-run-then-confirm when the agent chose the values itself, dry-run mandated for bulk.
  • Assignment is mandatory on ticket/milestone creation (editorId validated against the real user list, or an explicit unassigned: true).
  • Tool management: disabled tools are omitted from tools/list (no context-window cost) and calling one is refused with an actionable error. Read-only mode: leantmcp tools disable all && leantmcp tools enable readonly. State is stored per instance profile.
  • Backup-first: leantime_backup_project (MCP) or leantmcp backup (CLI) snapshot a project cheaply — agents are instructed to use it before bulk modifications. See Backup & recovery.

Tools

42 tools across 9 domains: projects & clients (8), tickets (10), comments (4), time tracking (4), milestones (6), sprints (4), users (1), bulk operations (3), backup & context (2). Updates use the patch API — only provided fields change. Descriptions follow a Markdown subset converted server-side; raw HTML in input is escaped.

Supported Markdown subset (for descriptions and comments)

MarkdownResult
# … ####Headings (levels 5+ clamp to h4)
blank-line separated textParagraphs (single newlines become line breaks)
- item / 1. itemUnordered / ordered lists (nesting supported)
- [ ] x / - [x] xInteractive checklists
**bold**, *italic*, ~~strike~~Emphasis
`code` and fenced ` blocksInline and block code
[label](https://…)Links (http/https/mailto only)
> quoteBlockquote
---Horizontal rule

Raw HTML in descriptions is escaped before reaching Leantime — it renders as literal text.

All 42 tools (click to expand)

Projects & clients

ToolDescription
leantime_list_projectsList all projects
leantime_get_projectGet project details
leantime_get_project_progressGet project progress metrics
leantime_create_projectCreate a project (Markdown details, clientId required)
leantime_update_projectUpdate a project (patch — only provided fields change)
leantime_find_projectsSearch projects by name
leantime_list_project_usersList users assigned to a project (valid editorId candidates)
leantime_list_clientsList clients (clientId needed to create projects)

Tickets

ToolDescription
leantime_list_ticketsList tickets with filters (status, milestone, sprint, user, type, search)
leantime_get_ticketGet ticket details
leantime_create_ticketCreate a ticket (Markdown description, mandatory assignment, subtasks via dependingTicketId; dryRun supported)
leantime_update_ticketUpdate a ticket (patch — only provided fields change; dryRun supported)
leantime_delete_ticketDelete a ticket (confirm-gated)
leantime_list_subtasksList a ticket's subtasks
leantime_my_tasksOpen tickets assigned to a user (default: the API key owner)
leantime_get_ticket_optionsPriorities, efforts, kanban columns and ticket types
leantime_get_statusesGet status labels for a project
leantime_get_ticket_typesGet ticket types for a project

Comments

ToolDescription
leantime_list_commentsList a ticket's discussion
leantime_add_commentComment on a ticket (Markdown converted to rich HTML)
leantime_update_commentEdit a comment (Markdown)
leantime_delete_commentDelete a comment (confirm-gated)

Time tracking

ToolDescription
leantime_log_timeLog hours on a ticket (add accumulates, set is idempotent; dryRun supported)
leantime_get_ticket_timeTotal and per-day booked time for a ticket
leantime_list_timesheetsList time entries between two dates
leantime_delete_timesheet_entryDelete a time entry (confirm-gated)

Milestones

ToolDescription
leantime_list_milestonesList milestones of a project
leantime_get_milestoneGet milestone details
leantime_create_milestoneCreate a milestone (Markdown description, mandatory assignment; dryRun supported)
leantime_update_milestoneUpdate a milestone (patch; dryRun supported)

| `leantime_get_milestone_progres

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요