프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

UVC PTZ Camera

제작자: AbhijatSaxena버전 0.2.0i★ 0i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.AbhijatSaxena/uvc-ptz-camera-mcp

설치 방법

What it does

Control a USB (UVC) pan/tilt/zoom camera, with every move confirmed from the picture.

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 기타

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성7/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수7/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

UVC PTZ Camera 설치해 줘. https://mcp.popnx.com/i/abhijatsaxena-uvc-ptz-camera-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server UVC PTZ Camera을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "uvc-ptz-camera": { "command": "uvx", "args": [ "uvc-ptz-camera-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 UVC PTZ Camera의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  3. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "uvc-ptz-camera": {
          "command": "uvx",
          "args": [
            "uvc-ptz-camera-mcp"
          ]
        }
      }
    }
  4. Claude를 끄고 다시 열기

  5. 해 보기

    UVC PTZ Camera을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 UVC PTZ Camera을 쓰고 있다고 하거나 답에 UVC PTZ Camera 도구 이름이 나오면 연결된 거예요

추가 설정 2개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • UVC_PTZ_STATE_DIR 각 카메라에 대해 학습한 내용을 저장할 위치입니다. 기본값은 /.uvc-ptz-camera-mcp입니다. 각도 정보만 보관하며 자격 증명은 저장하지 않습니다.
    영어 원문 보기Where to store what has been learned about each camera. Defaults to ~/.uvc-ptz-camera-mcp. Holds angles, never credentials.
  • UVC_PTZ_SIM_SOURCE 합성된 파노라마 대신 시뮬레이터의 파노라마로 사용할 이미지 경로.
    영어 원문 보기Path to an image to use as the simulator's panorama instead of the synthesised one.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 UVC PTZ Camera에 연결할 수 없어요

UVC PTZ Camera는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · UVC PTZ Camera에 연결되는 앱 쓰기

  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

B · 기타에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server UVC PTZ Camera을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user uvc-ptz-camera -- uvx uvc-ptz-camera-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 UVC PTZ Camera의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  3. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user uvc-ptz-camera -- uvx uvc-ptz-camera-mcp
  4. Claude Code에서 /mcp 입력

    UVC PTZ Camera이 목록에 있고 연결됨으로 보이면 돼요

  5. 해 보기

    UVC PTZ Camera을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 UVC PTZ Camera을 쓰고 있다고 하거나 답에 UVC PTZ Camera 도구 이름이 나오면 연결된 거예요

추가 설정 2개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • UVC_PTZ_STATE_DIR 각 카메라에 대해 학습한 내용을 저장할 위치입니다. 기본값은 /.uvc-ptz-camera-mcp입니다. 각도 정보만 보관하며 자격 증명은 저장하지 않습니다.
    영어 원문 보기Where to store what has been learned about each camera. Defaults to ~/.uvc-ptz-camera-mcp. Holds angles, never credentials.
  • UVC_PTZ_SIM_SOURCE 합성된 파노라마 대신 시뮬레이터의 파노라마로 사용할 이미지 경로.
    영어 원문 보기Path to an image to use as the simulator's panorama instead of the synthesised one.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server UVC PTZ Camera을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "uvc-ptz-camera": { "command": "uvx", "args": [ "uvc-ptz-camera-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 UVC PTZ Camera의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  3. Cursor에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    UVC PTZ Camera을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 UVC PTZ Camera을 쓰고 있다고 하거나 답에 UVC PTZ Camera 도구 이름이 나오면 연결된 거예요

추가 설정 2개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • UVC_PTZ_STATE_DIR 각 카메라에 대해 학습한 내용을 저장할 위치입니다. 기본값은 /.uvc-ptz-camera-mcp입니다. 각도 정보만 보관하며 자격 증명은 저장하지 않습니다.
    영어 원문 보기Where to store what has been learned about each camera. Defaults to ~/.uvc-ptz-camera-mcp. Holds angles, never credentials.
  • UVC_PTZ_SIM_SOURCE 합성된 파노라마 대신 시뮬레이터의 파노라마로 사용할 이미지 경로.
    영어 원문 보기Path to an image to use as the simulator's panorama instead of the synthesised one.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server UVC PTZ Camera을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "uvc-ptz-camera": { "type": "stdio", "command": "uvx", "args": [ "uvc-ptz-camera-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 UVC PTZ Camera의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  3. VS Code에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    UVC PTZ Camera을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 UVC PTZ Camera을 쓰고 있다고 하거나 답에 UVC PTZ Camera 도구 이름이 나오면 연결된 거예요

추가 설정 2개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • UVC_PTZ_STATE_DIR 각 카메라에 대해 학습한 내용을 저장할 위치입니다. 기본값은 /.uvc-ptz-camera-mcp입니다. 각도 정보만 보관하며 자격 증명은 저장하지 않습니다.
    영어 원문 보기Where to store what has been learned about each camera. Defaults to ~/.uvc-ptz-camera-mcp. Holds angles, never credentials.
  • UVC_PTZ_SIM_SOURCE 합성된 파노라마 대신 시뮬레이터의 파노라마로 사용할 이미지 경로.
    영어 원문 보기Path to an image to use as the simulator's panorama instead of the synthesised one.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? UVC PTZ Camera을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user uvc-ptz-camera -- uvx uvc-ptz-camera-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "uvc-ptz-camera": {
      "command": "uvx",
      "args": [
        "uvc-ptz-camera-mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "uvc-ptz-camera": {
      "command": "uvx",
      "args": [
        "uvc-ptz-camera-mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "uvc-ptz-camera": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "uvc-ptz-camera-mcp"
      ]
    }
  }
}

직접 입력할 값

  • UVC_PTZ_STATE_DIR env
    각 카메라에 대해 학습한 내용을 저장할 위치입니다. 기본값은 /.uvc-ptz-camera-mcp입니다. 각도 정보만 보관하며 자격 증명은 저장하지 않습니다.
    영어 원문 보기Where to store what has been learned about each camera. Defaults to ~/.uvc-ptz-camera-mcp. Holds angles, never credentials.
  • UVC_PTZ_SIM_SOURCE env
    합성된 파노라마 대신 시뮬레이터의 파노라마로 사용할 이미지 경로.
    영어 원문 보기Path to an image to use as the simulator's panorama instead of the synthesised one.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
82/주
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.2.0
카테고리i
기타
레지스트리 공개i
2026년 10월 8일
코드 마지막 변경i
2026년 10월 8일
제작자
AbhijatSaxena
패키지
pypi: uvc-ptz-camera-mcp
웹사이트
github.com
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 AbhijatSaxena 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 42일 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 uvc-ptz-camera-mcp@0.2.0 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/abhijatsaxena-uvc-ptz-camera-mcp.svg)](https://mcp.popnx.com/en/servers/abhijatsaxena-uvc-ptz-camera-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 20693개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 20693개 중 51%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 20693개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

UVC PTZ Camera, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 42일 전 변경됐고, 최신 버전(0.2.0)은 42일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

제작자: koala73널리 사용됨★ 9.1만3일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

제작자: openstatusHQ널리 사용됨★ 9.3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

제작자: Klavis-AI성장 중★ 5.8천14개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

제작자: jitsucom널리 사용됨★ 5.1천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · jitsu.com
비슷한 항목과 비교
이 항목
UVC PTZ Camera
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/44/44/41/44/4
라이선스MITAGPL-3.0AGPL-3.0MITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

uvc-ptz-camera-mcp

An MCP server for USB (UVC) pan/tilt/zoom cameras: aim them, nudge them, sweep them smoothly, zoom, and look through them — with every move confirmed by comparing the picture before and after.

No account, no cloud, no vendor SDK. One device, one USB cable.

camera_status       the camera, its axes and ranges, and whether it is real

aim point an axis at an absolute value, confirmed from the picture nudge move relative to where the device says it is sweep a smooth timed move, streamed at 15 Hz zoom set zoom as a multiplier (1x .. the camera's maximum) recentre every axis back to its default look one frame, returned as an image aim_learn remember "this direction is the desk" aim_list what has been recorded for this camera go_to point at a recorded direction plan_shot compile a multi-step shot and report what it would do, moving nothing run_shot execute a multi-step move, verified after every waypoint mark_view store the current picture under a label check_view has the picture changed since that label? track_start follow a subject: detect, measure, take a step, look again track_status what the follow loop is doing, iteration by iteration track_stop stop following and report what it saw and what it moved

Composing a shot is plan_shot then run_shot. Planning compiles exactly the steps the executor will compile, reports the per-step schedule, how far each axis travels and how long it takes, and touches nothing — so an agent can iterate on "a panorama, then zoom in on me" against the camera's real ranges *before* anything moves, instead of finding out afterwards.

Following

track_start runs a loop that keeps the camera pointed at a subject: detect it, measure how far it is from the centre of the frame, take a bounded step, look again. It decides only from the picture, for the same reason every other move here does — this camera's own report of where it is pointing cannot be trusted. It stops on its own when the subject is lost, when it settles inside the dead zone, when the camera stops answering, or after max_seconds, and track_status lists every iteration with the offset it measured and the step it applied.

Two quantities are *mount*-dependent rather than device-dependent, so they are explicit parameters instead of clever guesses: gain, degrees of movement per pixel of offset, and invert, which flips the direction. A wrong choice shows up honestly as a residual error that grows, and a single iteration is capped at 25 degrees, so a wrong gain converges slowly rather than throwing the camera across its whole range in one command.

Detection uses OpenCV's bundled face cascade (pip install 'uvc-ptz-camera-mcp[tracking]'), which needs no model download, no account and no network at first use. It finds faces: this follows a person, not a car or a dog. The loop and its arithmetic are tested against the simulator, but no part of follow mode has ever run against real hardware — treat it as the least proven thing here.

Why this exists

This class of camera reports positions it never moved to. Measured on the reference device (a DJI Osmo Pocket 4P in webcam mode, over its standard UVC controls):

  • a command to pan to 180 read back `180` while the video proved the camera had not moved at all;
  • a whole 32-second run read back 0 on every sample while the frame demonstrably changed;
  • pan 120 read back 119, pan 200 read back 199.

An agent acting on those values reports moves that never happened. So this server treats every device-reported value as a hint — returned, labelled, never trusted — and decides moved by comparing frames.

The threshold is not a guess either. It was calibrated on labelled hardware frames: every "same view" pair scored ≤ 0.104 (a 96-second quiet baseline, and two commands the hardware ignored), every "view changed" pair scored ≥ 0.624 (a pan, a tilt, a 12× zoom, two aim steps). The shipped threshold is the midpoint, 0.364 — a 6× separation — and the test suite asserts it still separates them. The labelled pairs and the values the metric produced are kept in the repository (tests/fixtures/) so the number can be re-checked rather than believed — as measurements, not pictures: no frame or video taken by a camera is committed here, and a test fails if one appears. The measurements behind the calibration are in docs/measurements.md.

What keeps the agent honest

  • `moved` comes from the picture. device_reported is returned beside it, labelled a hint.
  • A move that produced no change is an error, not a quiet success — after a bounded retry, the tool fails naming what was requested and what was observed.
  • Already being at the target is success without movement: moved: false, no error.
  • Blocking work never runs on the event loop (COM calls, ffmpeg captures), pinned by a test that records which thread the camera was touched on.
  • Observation is explicit: nothing takes a picture except a tool you called.
  • A refused write aborts a shot rather than continuing to drive a camera that stopped listening.

Install

uvx uvc-ptz-camera-mcp            # run without installing

pip install uvc-ptz-camera-mcp # or install it

For a real camera on Windows you also need the DirectShow extras:

pip install "uvc-ptz-camera-mcp[dshow]"

Then point your host at it — --print-config emits the snippet with the right interpreter:

uvc-ptz-mcp --print-config

uvc-ptz-mcp --list-devices # what to pass to --device uvc-ptz-mcp --backend simulator # try it with no camera attached

Where to put it

Claude Desktop, Cursor, VS Code and friends all take the same shape — this is the whole configuration, because there is nothing to authenticate:

{

"mcpServers": { "ptz-camera": { "command": "uvx", "args": ["uvc-ptz-camera-mcp"] } } }

Add "--device", "Osmo" (any substring of the name --list-devices prints) when the machine has more than one camera, and "--backend", "simulator" to work with none. Both can also be set in the environment instead of the args — UVC_PTZ_DEVICE, UVC_PTZ_BACKEND and UVC_PTZ_STATE_DIR — which is what the Claude Desktop bundle uses, and which survives a host restart without editing its config again. A flag wins over the environment, and an empty value means "not set" (a host that leaves an option blank writes "", not nothing). Claude Desktop also accepts the .mcpb bundle attached to each release as a one-click install.

Modes, and how you can tell which one you are in

BackendWhat it is
auto (default)Prefer a real camera; fall back to the simulator, saying why
dshowWindows DirectShow: the real device path
simulatorNo hardware at all: a model calibrated from the measurements below

Every result carries "simulated": true or false, and camera_status reports the reason when the simulator is standing in. Nothing quietly pretends to be hardware: a caller must never believe it is driving a camera when it is driving a model.

The simulator is calibrated from the reference device, not invented: ~0.4 s from write to first motion, a pan completing in about a second, a 4× zoom in about 2.5 s, silently dropped writes, and a read-back that echoes a request the hardware never applied. It renders frames by cropping a wide panorama, so a simulated pan genuinely changes the pixels — a simulator with a static picture would let verification pass vacuously.

Honest limitations

  • The real-device path is Windows-only (DirectShow). A Linux backend would use v4l2; the interface is in place, the implementation is not written.
  • No exposure, focus or white balance. The reference camera exposes no Processing Unit at all — only pan/tilt/roll/zoom.
  • The vendor Extension Unit is unreachable on Windows, so features that live there (on the reference camera, its built-in subject tracking) cannot be driven from software. Measured: IKsControl is refused on the device filter, IKsTopologyInfo lists three nodes and no vendor node, and CreateNodeInstance fails on all of them. Linux can reach it through uvcvideo's UVCIOC_CTRL_QUERY; that is a separate backend.
  • A moving subject looks like a moving camera. Frame comparison cannot tell the two apart; the metric is calibrated so that a static scene behaves, and check_view is there for judging a view rather than a move.
  • One unusable device must not hide the others. A registered-but-unavailable virtual camera raised when its DirectShow moniker was bound, which aborted a listing that should have returned two working cameras. Enumeration now skips what it cannot load and says so, and the same rule applies inside the backend when it looks for the camera you named.
  • Measured latency sets the ceiling: ~0.4 s from command to motion, so control loops run at a couple of hertz, not tens. That is the hardware's floor, not the software's.
  • The DirectShow path is tested but dormant. The reference device was returned partway through development, so the hardware path is exercised up to its interface and typed correctly against it, while the simulator carries the test load. Treat the first run against a real camera as the true acceptance test.

Development

pip install -e ".[dshow]" numpy pytest pytest-asyncio ruff

python -m pytest -q # 39 tests, three layers python -m ruff check . && python -m ruff format --check .

The suite is layered deliberately: the tool surface in-process against the simulator (mapping, validation, honest failure), pure unit tests for the compiler and the metric, and a real stdio handshake as a subprocess — including one run with a device name that cannot exist, because a server that dies at startup is invisible to every host and directory that lists it.

Reference device

Built against a DJI Osmo Pocket 4P in webcam mode: VID_2CA3 / PID_0023, exposing pan −38…215°, tilt −33…105°, roll ±35°, zoom 100…1200 (1×–12×) as standard UVC camera controls. Any UVC PTZ camera exposes the same surface; the ranges are read from the device at startup rather than assumed, and nothing vendor-specific is hard-coded.

Not affiliated with, endorsed by, or supported by DJI.