프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Eeg MCP

제작자: AImplifier버전 0.2.0i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.AImplifier/eeg-mcp

설치

개요

제작자가 쓴 설명(영어 원문)

Real-time EEG: BrainFlow streaming, wall-clock replay, online DSP, recording, and stimulation.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • PyPIPython의 uv 설치(uvx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "eeg": {
      "command": "uvx",
      "args": [
        "eeg-mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add eeg -- uvx eeg-mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "eeg": {
      "command": "uvx",
      "args": [
        "eeg-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "eeg": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "eeg-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 AImplifier 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32466개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32466개 중 76%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32466개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Eeg MCP, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.2.0)은 11일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, HotCodePush

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

HotCodePush

제작자: hotcodepush-team

Manage over-the-air (OTA) updates for React Native, Expo, Capacitor and Cordova apps.

클라우드에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

⚡🧠 eeg-mcp

Real-time EEG for AI agents — stream, replay, visualize, record, stimulate

[Documentation](https://aimplifier.github.io/eeg-mcp/) · [Tutorial](https://aimplifier.github.io/eeg-mcp/examples/tutorial-first-realtime-session/) · [Hardware](https://aimplifier.github.io/eeg-mcp/hardware/) · [Safety](https://aimplifier.github.io/eeg-mcp/safety/) · [Tool Reference](https://aimplifier.github.io/eeg-mcp/tools/)

A Model Context Protocol server that gives an AI agent one interface over the live EEG workflow: acquisition from ~66 BrainFlow boards, wall-clock replay of existing recordings, stateful online DSP, a live browser monitor, crash-safe recording, and gated stimulation output.

The offline counterpart is [neuro-mcp](https://github.com/AImplifier/neuro-mcp) (MNE processing, source imaging, BIDS/EHR storage). This is the real-time half — everything that has to happen while the signal is still arriving.

Concept

flowchart LR

Researcher(["🔬 BCI Researcher"]) Clinician(["🩺 Clinician"]) Agent[["🤖 AI Agent"]] Server(("eeg-mcp FastMCP · 47 tools"))

Clinician -- talks to --> Agent Researcher -- talks to --> Agent Agent -- MCP --> Server

Server --> Acquire["Acquire 66 boards · replay at true rate"] Server --> Process["Process stateful online DSP custom plugins"] Server --> Watch["Watch & Record live monitor · HTML crash-safe .fif"] Server --> Stim["Stimulate LSL · TTL · TMS/tES 3 safety gates"]

classDef acq fill:#14b8a6,stroke:#0d9488,color:#fff classDef proc fill:#4f8cff,stroke:#2f5fbf,color:#fff classDef viz fill:#b06fe0,stroke:#7c3fae,color:#fff classDef stim fill:#eb5757,stroke:#b93b3b,color:#fff class Acquire acq class Process proc class Watch viz class Stim stim

Nobody calls a tool by hand — you talk to an agent in plain English and it drives the 47 tools underneath. The [tutorial](https://aimplifier.github.io/eeg-mcp/examples/tutorial-first-realtime-session/) shows what that looks like end to end, with no hardware required.

What it does

📡 Stream

66 BrainFlow board identifiers — OpenBCI, Muse, ANT Neuro, g.tec, Mentalab and more — plus a synthetic board that needs no hardware. Samples land in a ring buffer filled by a background thread, so tool calls read a live view instead of blocking on a device. When BrainFlow itself can't reach a board — e.g. Muse on Windows, blocked by an upstream SimpleBLE bug — board="lsl" attaches to an existing LSL outlet instead.

⏪ Replay

Play an EDF/BDF/GDF/SET/FIF or BrainFlow CSV *at the rate it was recorded*, re-emitting annotations as events at their original timings. Adds speed, seek, pause and looping. A pipeline developed against a file runs unchanged against hardware.

👁 Visualize

A loopback-bound, token-gated live browser view: rolling traces, event markers, band power, per-electrode quality, and transport controls. Plus self-contained HTML reports — no CDN, no external assets, opens on an air-gapped machine.

💾 Record

Write continuously to MNE-native .fif with the event log attached as annotations, plus a metadata row in a store schema-compatible with neuro-mcp. Crash-safe: an interrupted session is recoverable.

🧩 Extend

Plug in your own real-time processor — feature extractor, classifier, artifact gate, or EEG tokenizer for sequence models — and it runs on the same footing as the built-ins, inside the acquisition loop. → Extending

⚡ Stimulate

One send_stim_event contract over pluggable backends: LSL for software, BrainFlow's marker channel for sample-aligned embedding, serial/TTL and templated ASCII for hardware including TMS and tES — behind three safety gates.

[!NOTE]

One event log. Board markers, replayed annotations, dispatched

stimulations and manual notes all land in the same table on the same clock, with

absolute sample indices. A closed-loop run reconstructs afterwards with no clock join.

Install

conda create -n eeg-mcp python=3.11 -y && conda activate eeg-mcp

pip install eeg-mcp

Optional extras and MCP client registration

pip install "eeg-mcp[lsl]"      # LSL marker outlets (PsychoPy, OpenViBE, ...)

pip install "eeg-mcp[serial]" # serial/TTL trigger delivery to hardware

Register with an MCP client using an absolute path to the env's interpreter:

{

"mcpServers": { "eeg-realtime": { "command": "/path/to/envs/eeg-mcp/bin/python", "args": ["-m", "eeg_mcp"] } } }

Or with the Claude Code CLI:

claude mcp add eeg-realtime -- /path/to/envs/eeg-mcp/bin/python -m eeg_mcp

→ Full guide: [Installation](https://aimplifier.github.io/eeg-mcp/installation/)

Quick start

Ask your agent for the outcome; it picks the calls. No hardware required:

start_stream(session_id="s1", board="synthetic")

check_signal_quality(session_id="s1") # before trusting anything set_filters(session_id="s1", bandpass_low=1, bandpass_high=40, notch_freq=50) get_band_power(session_id="s1", seconds=2) start_monitor(session_id="s1") # → open the returned URL

Replay a real recording as if it were live, then keep the record:

inspect_recording(path="sub-04_rest.edf")

start_replay(session_id="r1", path="sub-04_rest.edf", speed=1.0) get_events(session_id="r1", origin="annotation") export_report(session_id="r1", notes="Routine review.")

flowchart LR

A["start_stream or start_replay"] --> B[check_signal_quality] B --> C[set_filters] C --> D["get_band_power get_psd"] C --> E[start_monitor] C --> P[attach_processor] A --> R[start_recording] D --> S[send_stim_event] P --> S R --> X[stop_recording] S --> X E --> X X --> Z[stop_stream]

classDef hot fill:#14b8a6,stroke:#0d9488,color:#fff class A,X hot

Documentation

Guide
🚀 [Installation](https://aimplifier.github.io/eeg-mcp/installation/)Environment, client registration, troubleshooting
📘 [Tutorial](https://aimplifier.github.io/eeg-mcp/examples/tutorial-first-realtime-session/)End to end, no hardware needed
⏪ Replay-Driven DevelopmentBuild against a recording, deploy live
🔁 Closed-Loop NeurofeedbackFeature → trigger, with a measured latency budget
🩺 Live Clinical ReviewVisual review, annotation, reporting
⚡ Stimulation ProtocolsTMS and tES through the safety gates
🧩 ExtendingWrite a custom processor or EEG tokenizer
🔌 Supported HardwareAll 66 boards, formats, stimulation transports
⚠️ SafetyRead before connecting a stimulator
🛠 Tool ReferenceAll 47 tools

The one design decision worth knowing

[!IMPORTANT]

Filtering happens in the producer thread, not at query time.

A stateful IIR filter must see every sample exactly once, in order. The common shortcut — filtering each query window independently — restarts the filter at every window boundary and injects a transient each time. It is invisible in a band-power plot and fatal for anything phase-sensitive.

So the producer filters each chunk once as it arrives, carrying sosfilt delay-line state forward, and writes to a second ring buffer. Queries just read.

flowchart LR

BF[Board / Recording] -->|poll| PR{{Producer thread}} PR -->|raw chunk| RB[(Raw ring buffer)] PR -->|stateful sosfilt| FB[(Filtered ring buffer)] PR -->|markers & annotations| EL[(Event log)] PR -->|append| DISK[(.fif on disk)] PR -->|streaming| PL[Your processors] RB & FB & EL --> Q[MCP tools]

classDef hot fill:#14b8a6,stroke:#0d9488,color:#fff class PR hot

The test suite asserts chunked filtering matches whole-signal filtering to 1e-9, *and* asserts as a control that the naive approach does not.

Consequence
Filters are causalNo zero-phase option — that needs future samples. stream_status reports group_delay_sec
Both buffers are keptread_window(filtered=false) always gets raw signal, to check whether a feature is real or an artifact
Indices are sharedAn event's sample_index means the same thing in either buffer

[!TIP]

Budget a closed loop as group delay + poll interval + dispatch latency —

measured at ~71 ms in the reference configuration. Good for neurofeedback;

not adequate for phase-locked stimulation.

Stimulation safety

[!CAUTION]

**This software is not a medical device and has not been validated for

clinical use. TMS and tES can cause harm, including seizure**. Use only

under a protocol approved by your ethics board, on a rig whose device-level

interlocks are intact, with a trained operator present.

Three gates apply to every hardware backend:

#GateEffect
1ConfigHardware backends refuse to open unless the server was started with EEG_MCP_ALLOW_HARDWARE_STIM=1. An agent cannot set this.
2Armingarm_stim permits dispatch for a window that *expires*, so a stalled agent cannot resume and fire later
3LimitsIntensity, duration and interval are clamped; violations raise rather than silently saturate

None of this replaces the interlocks on the device itself.

[!WARNING]

**The hardware backends are generic transports driven by command templates you

supply from your device's manual — not vendor drivers, and none has been tested

against a physical stimulator.** A plausible-looking untested driver would be

worse than none: it would fail silently while connected to something pointed at

a person's head.

Start every protocol on backend="log", which accepts everything and emits nothing.

Verify

python testing/verify.py                    # core correctness

python testing/verify_recording.py # recording + metadata store python testing/verify_processing.py # plugin processors python testing/persona_bci_researcher.py # engineer workflow python testing/persona_clinician.py # clinician workflow

All five drive the real server through FastMCP's in-memory client and assert against planted ground truth:

  • a spike planted at an annotation onset lands at t = 0 ± 0 ms in the extracted epoch — prov

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

PopNx에게 묻기