World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Read-only data patrol for AI agents: find broken partitions, prove fixes, escalate the rest.
제작자가 쓴 원문
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 11/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 23/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 7 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
DataRanger 설치해 줘. https://mcp.popnx.com/i/akshaysharma1088-dataranger.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 20일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server DataRanger을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "dataranger": { "command": "uvx", "args": [ "dataranger", "mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 DataRanger의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"dataranger": {
"command": "uvx",
"args": [
"dataranger",
"mcp"
]
}
}
}DataRanger을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 DataRanger을 쓰고 있다고 하거나 답에 DataRanger 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 DataRanger에 연결할 수 없어요
DataRanger는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · DataRanger에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server DataRanger을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user dataranger -- uvx dataranger mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 DataRanger의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user dataranger -- uvx dataranger mcpDataRanger이 목록에 있고 연결됨으로 보이면 돼요
DataRanger을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 DataRanger을 쓰고 있다고 하거나 답에 DataRanger 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server DataRanger을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "dataranger": { "command": "uvx", "args": [ "dataranger", "mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 DataRanger의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
DataRanger을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 DataRanger을 쓰고 있다고 하거나 답에 DataRanger 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server DataRanger을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "dataranger": { "type": "stdio", "command": "uvx", "args": [ "dataranger", "mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 DataRanger의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
DataRanger을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 DataRanger을 쓰고 있다고 하거나 답에 DataRanger 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Claude Code
claude mcp add --scope user dataranger -- uvx dataranger mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"dataranger": {
"command": "uvx",
"args": [
"dataranger",
"mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"dataranger": {
"command": "uvx",
"args": [
"dataranger",
"mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"dataranger": {
"type": "stdio",
"command": "uvx",
"args": [
"dataranger",
"mcp"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
pypi: dataranger이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 21일 점검
레지스트리 이름이 GitHub 계정 akshaysharma1088 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 어제
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
아직 확인하지 않았습니다
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/akshaysharma1088-dataranger)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(0.6.3)은 어제 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 DataRanger | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
DataRanger patrols your data, fixes what it can prove, and calls you for the rest.
A park ranger walks the trails, fixes what is safe to fix on the spot, radios in anything dangerous, and files a report. DataRanger does the same for your tables. It finds data-quality incidents, tests every candidate fix on a copy against the source's control totals, applies only the fixes it can prove, and keeps wrong fixes under a rate you choose. Everything else goes to a person, with the evidence attached.
The dotted line under the name is a patrol trail: one marker per daily partition, the same marks the patrol console uses.
Most data-quality tools stop at an alert. Letting an AI agent fix data is the obvious next step, and a risky one: a wrong fix can pass every monitor you have. In the DQ-Repair benchmark, a rules engine left wrong data behind in 31% of incidents and an agent checked only by monitors in 24%. DataRanger's calibrated gate kept it under 1% while handling 59% of incidents without a person.
Every patrol writes one self-contained page that answers a data team's morning question: what broke, what DataRanger fixed, and what needs a person.
Run the demo notebook in your browser to see the summary, audit rows and interactive dashboard without installing anything locally.
pip install dataranger
dataranger demo # patrol a sample table with planted problems; opens as dataranger-demo/dashboard.html
On Windows, if dataranger is "not recognized" after installing, run it as python -m dataranger instead.
On your own DuckDB tables (a fact table partitioned by date, a reference table, and the source's control totals):
dataranger patrol --db warehouse.duckdb --table payments --ref-table customers \
--manifest-table control_totals --key payment_id --reference customer_id \ --date booking_date --segment channel --amount amount
Or point it straight at exported files, no database needed (.csv, .tsv or .parquet; the reader follows the extension):
dataranger patrol --facts-file payments.csv --ref-file customers.csv \
--manifest-file control_totals.csv --key payment_id --reference customer_id \ --date booking_date --segment channel --amount amount
Use one source at a time. With files, --table is optional and only sets the report title (it defaults to the facts file name). Add --days 45 to any source to patrol only the most recent days.
The control-totals table has one row per date and segment, plus a row with segment * for the whole day, with columns n (rows) and amount (sum). DataRanger never modifies your tables: fixed partitions go to fixed_version.csv, every decision and its evidence to audit.jsonl, a one-row-per-incident summary for spreadsheets to incidents.csv, and the morning report to dashboard.html.
If you don't keep a control-totals table yet, build it from the raw or landing table the facts are loaded from, with the same column flags:
dataranger totals --db warehouse.duckdb --table raw.payments --out-table ops.payments_totals \
--date booking_date --segment channel --amount amount dataranger totals --facts-file raw_payments.parquet --out control_totals.csv \ --date booking_date --segment channel --amount amount
totals counts each day's rows (a timestamp counts toward its calendar day) and sums the amount, per segment and for the whole day. It stops if a row has no date, or has the segment value *. Rows with no segment count only toward the day's * row. Running it again replaces the output. --out-table is the only way DataRanger writes to your database: it writes only the table you name, replaces an existing table only if that table already has the control-totals columns, and never replaces the --table it reads from. The totals are only as independent as the table they come from, so build them upstream of the load you want to check.
For scheduled jobs, add --json to either patrol command to print one JSON object with incidents, auto_fixed, no_action, escalate, and the report path. Add --fail-on-escalate to return exit code 2 when any incident needs review, or 0 otherwise. The flags work independently: --fail-on-escalate also works with the normal text summary.
To hear about escalations without opening the report, add --notify-webhook URL (or set DATARANGER_WEBHOOK) with a Slack or Microsoft Teams incoming webhook. When at least one incident needs a person, the patrol posts {"text": ...} with the table, the counts and the partitions to look at (the same text as --summary-md). A Teams webhook made with the Workflows app (a logic.azure.com or powerplatform.com URL) gets the same text in an Adaptive Card instead, which is the shape it expects. --notify-always also posts when nothing needs a person. A failed post prints a note and leaves the exit code alone, and the webhook URL is never printed.
To run a daily patrol and download the morning report, copy the GitHub Actions example. It runs on demo data without credentials and includes instructions for your own tables.
The default threshold was calibrated on the DQ-Repair benchmark for a 1% target. Once people have reviewed some of DataRanger's decisions, calibrate on your own data:
dataranger calibrate --audit report/audit.jsonl --labels reviewed.csv --alpha 0.01
reviewed.csv has columns partition and verdict (right or wrong). About 300 reviewed incidents certify a 1% target and about 60 certify 5%.
DataRanger does not replace your tests or monitoring. It picks up where they stop: at the fix.
| Tests (dbt tests, Great Expectations, Soda) | Observability platforms (for example Monte Carlo) | AI coding agents | DataRanger | |
|---|---|---|---|---|
| Finds problems | Rules you write | Learned patterns and anomalies | When asked | Rules and statistics, against the source's control totals |
| Fixes data | No | No, it alerts and helps find the cause | Yes, without independent proof | Yes, only fixes proven against the source |
| Says how often a fix is wrong | No | No | No | Yes: a wrong-fix rate you choose, with a statistical guarantee |
| When unsure | Fails the run | Sends an alert | Often guesses | Escalates to a person, with the evidence |
| Where it runs | Your pipeline | Vendor service | Your editor or CI | Your machine or CI, open source |
Keep your tests: they catch problems DataRanger is not designed for, such as a new column breaking a contract. Use DataRanger for the night-shift part, where something has to decide whether a fix is safe to apply without waking anyone up.
DataRanger reads from Snowflake, dbt models, DuckDB and files, and runs from the command line, a GitHub Action or an AI agent. Whatever the source, a patrol is three SELECT statements: nothing is written back.
pip install "dataranger[snowflake]"
dataranger patrol --snowflake --table ANALYTICS.GOLD.PAYMENTS --ref-table ANALYTICS.GOLD.CUSTOMERS \ --manifest-table ANALYTICS.OPS.CONTROL_TOTALS --key payment_id --reference customer_id \ --date booking_date --segment channel --amount amount --days 45
DataRanger runs three SELECT statements and nothing else, so a read-only role is enough and the warehouse is never modified. It selects only the mapped columns, and --days limits both the facts and the control totals, so a patrol costs a few seconds of a small warehouse. Use at least 30 days so the checks have a baseline. Queries carry the query tag dataranger, so they are easy to find in query history.
Credentials are read from where you already keep them; DataRanger stores nothing:
--snowflake uses SNOWFLAKE_ACCOUNT and SNOWFLAKE_USER, with SNOWFLAKE_PASSWORD, SNOWFLAKE_PRIVATE_KEY_PATH (and SNOWFLAKE_PRIVATE_KEY_PASSPHRASE) or SNOWFLAKE_AUTHENTICATOR, plus SNOWFLAKE_ROLE, SNOWFLAKE_WAREHOUSE, SNOWFLAKE_DATABASE and SNOWFLAKE_SCHEMA. With multi-factor login, set SNOWFLAKE_AUTHENTICATOR=username_password_mfa and put the current code from your authenticator app in SNOWFLAKE_PASSCODE. For scheduled jobs, use a key pair.--snowflake prod uses the connection named prod in ~/.snowflake/connections.toml, the file the Snowflake CLI uses.Column names are matched without regard to case, so --key payment_id finds PAYMENT_ID. To try it on a trial account with demo data, follow examples/snowflake.
Patrol the table behind a db