impeccable
The design vocabulary for your coding agent. Steer with polish and bolder, review with critique and audit, catch AI slop before it ships.
Design Cisco Packet Tracer topologies with AI agents and generate ready-to-run PTBuilder scripts.
제작자가 쓴 원문
이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다
The design vocabulary for your coding agent. Steer with polish and bolder, review with critique and audit, catch AI slop before it ships.
Editorial diagram design for Claude Code, Codex, GitHub Copilot, Cursor, Factory Droid, Qoder, and Pi. 45 diagram types. Self-contained HTML + SVG. No shadows. No Mermaid slop.
Create beautiful slides on the web using a coding agent's frontend skills
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 4/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 16/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
MCP Tracer 설치해 줘. https://mcp.popnx.com/i/aldoogando03-bit-mcp-tracer.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 20일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server MCP Tracer을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "tracer": { "command": "npx", "args": [ "-y", "mcp-tracer" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP Tracer의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"tracer": {
"command": "npx",
"args": [
"-y",
"mcp-tracer"
]
}
}
}MCP Tracer을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 MCP Tracer을 쓰고 있다고 하거나 답에 MCP Tracer 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 MCP Tracer에 연결할 수 없어요
MCP Tracer는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · MCP Tracer에 연결되는 앱 쓰기
B · 디자인, 이미지 및 오디오에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server MCP Tracer을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user tracer -- npx -y mcp-tracer 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP Tracer의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user tracer -- npx -y mcp-tracerMCP Tracer이 목록에 있고 연결됨으로 보이면 돼요
MCP Tracer을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 MCP Tracer을 쓰고 있다고 하거나 답에 MCP Tracer 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server MCP Tracer을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "tracer": { "command": "npx", "args": [ "-y", "mcp-tracer" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP Tracer의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
MCP Tracer을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 MCP Tracer을 쓰고 있다고 하거나 답에 MCP Tracer 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server MCP Tracer을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "tracer": { "type": "stdio", "command": "npx", "args": [ "-y", "mcp-tracer" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 MCP Tracer의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
MCP Tracer을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 MCP Tracer을 쓰고 있다고 하거나 답에 MCP Tracer 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user tracer -- npx -y mcp-tracerClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"tracer": {
"command": "npx",
"args": [
"-y",
"mcp-tracer"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"tracer": {
"command": "npx",
"args": [
"-y",
"mcp-tracer"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"tracer": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"mcp-tracer"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검
레지스트리 이름이 GitHub 계정 aldoogando03-bit 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 14일 전
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 mcp-tracer@0.1.1 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/aldoogando03-bit-mcp-tracer)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 14일 전 변경됐고, 최신 버전(0.1.1)은 14일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.
같은 카테고리에는: HyperFrames by HeyGen, Pascal 3D Editor, draw.io, Figma MCP Server, Remocn: Remotion MCP server
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Official HyperFrames by HeyGen: the best AI video editor in chat. Captions, motion graphics, MP4.
Create, inspect, validate, and save editable 3D building scenes with Pascal's MCP server.
Create draw.io diagrams in chat from Mermaid or XML, shown live and interactive. 10,000+ shapes.
The Figma MCP server brings Figma design context directly into your AI workflow.
Hosted MCP for Remotion videos: search Remocn components, read docs, plan a video, preview it.
| 이 항목 MCP Tracer | HyperFrames by HeyGen | Pascal 3D Editor | draw.io | Figma MCP Server | Remocn: Remotion MCP server | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드 또는 컴퓨터 설치 모두 가능 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 예 | 아니요 | 아니요 | 예 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 5/5 | 4/4 | 4/4 | 4/4 |
| 라이선스 | MIT | Apache-2.0 | MIT | Apache-2.0 | – | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
English | Español
An MCP server that lets any AI agent design Cisco Packet Tracer topologies. The agent builds the network through tools, mcp-tracer validates it and turns it into a script for the PTBuilder extension, and you run that script in Packet Tracer.
Website: mcp-tracer-web.vercel.app, a step-by-step overview with setup for each AI client.
mcp-tracer is an independent project. It is not affiliated with, endorsed or sponsored by Cisco Systems, Inc., nor by PTBuilder or its author. See the disclaimer.
build_topology, or add_device, add_link, configure_device, configure_pc…). The server keeps the topology in memory and rejects invalid input on the spot: unknown models, ports a model doesn't have, a port used twice, IOS commands on a PC.validate_config reports what is left: errors (the script would fail or abort in Packet Tracer) and warnings (it may not work as intended).generate_script returns a JavaScript script for PTBuilder, or export_script writes it to a .js file.flowchart LR
U([You]) -- "describe the network" --> A["AI agent (MCP client)"] A -- "tool calls" --> S["mcp-tracer: in-memory topology"] S -- "validate_config" --> V{"errors?"} V -- "yes: fix and retry" --> A V -- "no" --> G["PTBuilder script"] G -- "you copy and paste it" --> P["Packet Tracer: Builder Code Editor, Run"]
mcp-tracer does not control Packet Tracer. It never connects to it: it can't see your workspace, link lights or show output, and it can't change a network that is already running. It only generates a script, which you run yourself. The topology lives in the server's memory and is lost when the MCP client restarts the server; use save_topology to keep it.
npx comes with it).Builder.pts from the PTBuilder repository.Builder.pts. (One user on PT 9.0.0 also had to click Run in that dialog.)No global install is needed. MCP clients start the server with:
npx -y mcp-tracer
Run by hand, the server prints one line to stderr ([mcp-tracer] info: v0.1.1 running on stdio) and then waits for an MCP client on stdin/stdout. That is expected.
git clone https://github.com/aldoogando03-bit/mcp-tracer.git
cd mcp-tracer npm ci npm run build
Then point your client at node with the absolute path to build/index.js (see below).
Every client below uses the same server entry. Restart the client (or reload its MCP servers) after editing its configuration.
Open Settings > Developer > Edit Config, or edit the file directly:
%APPDATA%\Claude\claude_desktop_config.json~/Library/Application Support/Claude/claude_desktop_config.json{
"mcpServers": { "mcp-tracer": { "command": "npx", "args": ["-y", "mcp-tracer"] } } }
claude mcp add mcp-tracer -- npx -y mcp-tracer
Add --scope project to share it with your team through a .mcp.json file in the project root, which you can also write by hand:
{
"mcpServers": { "mcp-tracer": { "command": "npx", "args": ["-y", "mcp-tracer"] } } }
On native Windows (not WSL), wrap npx in cmd /c: claude mcp add mcp-tracer -- cmd /c npx -y mcp-tracer.
Use the same mcpServers JSON in .cursor/mcp.json in your project, or in ~/.cursor/mcp.json for every project.
MCP is an open standard, so mcp-tracer works with any MCP client that can launch local stdio servers; only the place where you register it changes. After that, you ask for the network in plain language and the AI calls the tools itself. There is no special command to type.
These clients read the same mcpServers JSON shown for Claude Desktop:
~/.copilot/mcp-config.json takes this JSON. A workspace's .vscode/mcp.json and the user mcp.json (MCP: Open User Configuration) use VS Code's own format instead, shown below.~/.gemini/settings.json for every project, or .gemini/settings.json in a project. Or run gemini mcp add -s user mcp-tracer npx -- -y mcp-tracer (without -s user it writes the project file).VS Code's own format has a servers key and a type:
{
"servers": { "mcp-tracer": { "type": "stdio", "command": "npx", "args": ["-y", "mcp-tracer"] } } }
Zed uses a context_servers key in its settings.json (zed: open settings file):
{
"context_servers": { "mcp-tracer": { "command": "npx", "args": ["-y", "mcp-tracer"] } } }
OpenAI Codex (CLI and IDE extension) reads ~/.codex/config.toml, or .codex/config.toml in a trusted project:
[mcp_servers.mcp-tracer]
command = "npx" args = ["-y", "mcp-tracer"]
Or run codex mcp add mcp-tracer -- npx -y mcp-tracer.
To set MCP_TRACER_DIR, add an env object next to args (in Codex, a [mcp_servers.mcp-tracer.env] table). On Windows, if a client can't start the server, run npx through cmd /c as in the Windows note.
Model note. The client's model has to handle tool calling well. Small local models may struggle with large topologies. The built-in prompts (vlan_lab, ospf_lab, dhcp_lab, nat_lab) help, because they already contain the computed topology.
ChatGPT on the web and on mobile is not supported yet: it only connects to remote MCP servers over HTTPS, and mcp-tracer runs locally over stdio. The ChatGPT desktop app shares Codex's MCP configuration, so the Codex setup above applies to it, or you can add mcp-tracer as a STDIO server under Settings > MCP servers.
{
"mcpServers": { "mcp-tracer": { "command": "node", "args": ["/absolute/path/to/mcp-tracer/build/index.js"] } } }
MCP_TRACER_DIRsave_topology, load_topology and export_script resolve relative paths against MCP_TRACER_DIR if it is set, and otherwise against the server's working directory, which MCP clients often set to something arbitrary. A leading ~ means your home directory. Absolute paths always work.
The file tools only accept their own extensions, case-insensitively: .json for save_topology and load_topology, .js or .txt for export_script. Anything else, such as .cmd or .bat, is refused, so a tool call can never write an executable file. A path that names a directory (~, ., .., a bare drive such as C:, or an existing folder) or contains : in the file name is refused too. Paths are not confined to MCP_TRACER_DIR; restricting them to it is a possible future option.
{
"mcpServers": { "mcp-tracer": { "command": "npx", "args": ["-y", "mcp-tracer"], "env": { "MCP_TRACER_DIR": "C:\\Users\\you\\Documents\\pt-labs" } } } }
With Claude Code: claude mcp add --env MCP_TRACER_DIR=/home/you/pt-labs mcp-tracer -- npx -y mcp-tracer.
If a client fails to start the server (for example spawn npx ENOENT), run npx through cmd:
{
"mcpServers": { "mcp-tracer": { "command": "cmd", "args": ["/c", "npx", "-y", "mcp-tracer"] } } }
The repository also ships a skill, skills/mcp-tracer/SKILL.md, that tells an agent when and how to use these tools: build with build_topology, always run validate_config, then hand over the script and the steps to run it. It does not replace the server; install both:
npx skills add aldoogando03-bit/mcp-tracer
Device names are case-insensitive and must be unique. A name has 1 to 64 characters: letters, digits, spaces and . _ ( ) / -, starting with a letter or digit (R1, Core SW (1)); constructor and prototype are reserved. Port names can be abbreviated (Gi0/0 becomes GigabitEthernet0/0, Fa0/1 becomes FastEthernet0/1). Coordinates (x, y) go from -100000 to 100000. Arguments marked ? are optional.
Inputs have size limits: 500 devices and 2000 links per topology, 64 characters for model and port names, 32 for addresses and masks, and up to 2000 IOS commands of 512 characters each per call and per device.
| Tool | What it does | Arguments |
|---|---|---|
add_device | Add a device. Aliases resolve to PTBuilder keys (4331 → ISR4331, WRT300N → Linksys-WRT300N, PC → PC-PT). Without x/y the device is placed automatically. The result lists its ports. | name, model, x?, y? |
add_link | Connect two ports with a cable. A port takes one link. Without cable, the server infers it. | dev1, port1, dev2, port2, cable? |
remove_device | Remove a device with its links, IOS commands and IP configuration. | name |
remove_link | Remove the link that uses a port. | device, port |
rename_device | Rename a device. Its links and configuration follow; IOS hostname lines are not changed. | name, new_name |
configure_device | Append IOS commands to a router, switch or multilayer switch. They run in global configuration mode; enable, configure terminal, end and write memory lines are dropped and reported. | name, ios_commands (array), replace? (default false: append) |
configure_pc | Set a host's IPv4 configuration on FastEthernet0, static or DHCP. Supported on PC-PT and Server-PT; Laptop-PT and Printer-PT are accepted but unverified. ip accepts 192.168.1.10/24, mask accepts 255.255.255.0 or /24. | name, dhcp? (default false), ip?, mask?, gateway?, dns? |
| build_topology | Replace the whole topology in one atomic cal