프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Amber

제작자: ambermem버전 1.1.1439i★ –i클라우드에서 실행
레지스트리 이름com.ambermem/amber

설치

개요

제작자가 쓴 설명(영어 원문)

Long-term memory for AI assistants: permanent, portable across clients, searchable and exportable.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 검색 및 AI 기억

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 3개 중 3개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://mcp.ambermem.com

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http amber https://mcp.ambermem.com

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "amber": {
      "url": "https://mcp.ambermem.com"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "amber": {
      "type": "http",
      "url": "https://mcp.ambermem.com"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://mcp.ambermem.com

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

서버가 도구 목록을 보여 주기 전에 로그인을 요구해요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 ambermem.com 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    244ms 만에 응답(HTTP 401)

  • ✓ 통과

    OAuth로 로그인

    OAuth 로그인을 지원한다고 밝혀서, AI 앱이 로그인 화면으로 안내해 줘요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    아직 점검하지 않았어요. 엔드포인트를 점검할 때 도구 목록을 읽어요

검색 및 AI 기억 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 7248개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 7248개 중 97%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 7248개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Amber, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.1.1439)은 어제 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Context7, Codebase Memory, Exa

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Context7

제작자: upstash

Up-to-date docs for AI agents

컴퓨터 또는 클라우드★ 64,224MIT오늘 업데이트
설치

Codebase Memory

제작자: DeusData

Codebase knowledge graph for AI agents — 162 languages, sub-ms queries, 99% fewer tokens.

내 컴퓨터에서 실행★ 48,148MIT20일 전 업데이트
설치

Exa

제작자: exa-labs

Connect AI agents to Exa for web search, content fetching, and multi-step research.

클라우드에서 실행★ 5,213MIT지난달 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Amber

Long-term memory for AI assistants.

Amber is an MCP server that gives any AI assistant persistent, searchable memory across conversations. Your AI remembers preferences, decisions, project context, and personal details - once it is connected and the two required settings below are on.

Just talk normally. Amber stores what matters and finds it when relevant.

Quick Install

One command. Works with any MCP-compatible client.

Claude Code / Claude Desktop
claude mcp add --transport http --scope user amber https://mcp.ambermem.com
Cursor

Add to ~/.cursor/mcp.json (or %USERPROFILE%\.cursor\mcp.json on Windows):

{

"mcpServers": { "amber": { "url": "https://mcp.ambermem.com" } } }

ChatGPT

Settings → Connectors → Create → URL: https://mcp.ambermem.com

Windsurf

Add to ~/.codeium/windsurf/mcp_config.json:

{

"mcpServers": { "amber": { "serverUrl": "https://mcp.ambermem.com" } } }

VS Code (GitHub Copilot)

Add to .vscode/mcp.json:

{

"servers": { "amber": { "type": "http", "url": "https://mcp.ambermem.com" } } }

Any MCP client

URL: https://mcp.ambermem.com | Transport: Streamable HTTP | Auth: OAuth 2.1 (auto-discovered)

Required: two settings

Adding the URL is not enough on its own. Without these two settings, most assistants use Amber only when you explicitly say "remember this", and their built-in memory quietly takes everything else, so Amber stays nearly empty.

  1. Add this to your AI's custom instructions / personal preferences (Claude personal preferences, ChatGPT custom instructions, Cursor rules, etc.):

Whenever something worth remembering comes up - a life event, a decision, a preference, something I learned or realized, or anything about who I am - save it to Amber (my memory) without asking. Treat normal conversation as a source of memories, not only when I say "remember this".

  1. Keep Amber's tools always available. In your client's tool or MCP settings, set Amber to "always on" rather than on-demand, so your AI can reach it the instant a memory comes up.

How It Works

  1. You talk to your AI normally. Amber stores important facts in the background.
  2. Next conversation, your AI searches Amber automatically when context would help.
  3. Memory improves over time. The more you use it, the better it gets.

Two settings, once. No tagging. No manual organization.

What Makes Amber Different

FeatureBasic memory serversAmber
StorageOne embedding per memoryMultiple semantic variants per fact
SearchSingle vector lookupHybrid: vector + keyword + RRF fusion
QueriesExact match onlyMany phrasings per fact, matched semantically
InputStored as-isChunked into atomic facts, each independently searchable
TopicsManual tags or noneAuto-grouped, matched semantically at search time
PrivacyVaries by serverNo generative model reads your memories
TimeNo temporal awarenessNatural language time parsing ("last week", "3 days ago")

Technical Details

  • 29 MCP tools (14 memory, 13 account, 2 feedback/notification)
  • Hybrid retrieval pipeline: vector search + full-text search + Reciprocal Rank Fusion
  • Multi-variant embeddings: every fact is stored with several paraphrases (at least 5; a store with fewer is rejected), which is the main thing that makes it findable later
  • No generative model reads your memories: your assistant does the chunking, the topics and the phrasings. Memory text is sent only to an *embedding* endpoint (a vector model, not a chat model), so no chat model is ever shown what you store
  • Atomic facts: a conversation becomes individually searchable facts rather than one blob, each with its own subjects, topics and dates
  • Temporal search: "what did I say last week?" resolves to a real date range rather than a keyword match
  • Automatic topic grouping: memories are grouped by topic, and a search for "work" also finds "career" and "job"
  • Async processing: storage completes in the background, never blocking your conversation

Pricing

  • 90-day free trial - no charge, cancel anytime
  • $2.99/month after trial, via PayPal
  • Cancel instantly - ask your AI to cancel, or cancel through PayPal directly
  • No lock-in - export all your data as JSON anytime

Privacy

  • No email collected
  • No marketing, no spam
  • Data isolated per user (separate database)
  • PayPal handles all payment info
  • Full export + account deletion available
  • GDPR compliant (data minimization by design)

Architecture

Amber runs on Cloudflare Workers (zero cold starts, global edge deployment) with Turso databases (one per user, full isolation). Your assistant does the chunking, the topics and the phrasings, so no generative model is ever shown what you store; memory text is sent only to OpenAI's embedding endpoint.

For full technical documentation: ambermem.com/llms.txt

Links

FAQ

Will it slow my AI down? No. Storage is async (background). Search adds <1 second.

What if Amber shuts down? Export all your data as JSON anytime. Your data is always yours.

Do I need a PayPal account? Currently yes. PayPal handles both identity and billing. More login options coming soon.

Is my data safe? Each user gets a completely isolated database. No data is shared between users. Amber has no access to your PayPal payment details.

Can I self-host? Not currently. Amber is a managed service. We handle the infrastructure, scaling, and LLM costs so you don't have to.

PopNx에게 묻기