프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Tapir

레지스트리 이름io.github.anilcancakir/tapir

설치 방법

What it does

Drive a live Flutter app from an AI agent: snapshot the Semantics tree, tap, type and screenshot.

  • Connects –
  • Account or key No key needed
  • Category 웹 및 브라우저

함께 쓰기

이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다

timesfm

TimesFM (Time Series Foundation Model) is a pretrained time-series foundation model developed by Google Research for time-series forecasting.

제작자: google-research★ 35,629skill 1개

Skill · 안내서

Shadowbroker

Open-source intelligence for the global theater. Track everything from the corporate/private jets of the wealthy, and spy satellites, to seismic events in one unified interface. Hook an AI agent up to have it parse through data and find previously unseen correlations. The knowledge is available to…

제작자: BigBodyCobain★ 11,602skill 1개

Skill · 안내서

google-maps-scraper

scrape data from Google Maps. Extracts data such as the name, address, phone number, website URL, rating, reviews number, latitude and longitude, reviews,email and more for each place

제작자: gosom★ 8,209skill 1개

Skill · 안내서

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기7/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수19/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 3/3 통과 · 내 컴퓨터에서 실행돼요

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude는 아직 Tapir에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

ChatGPT는 아직 Tapir에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

대신 이렇게 할 수 있어요

B · 웹 및 브라우저에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code는 아직 Tapir에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

Cursor는 아직 Tapir에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

VS Code는 아직 Tapir에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Tapir을 쓰는 사람에게 물어보세요💬 토론 →

한눈에 보기

주간 다운로드i
npm/PyPI에 없음
연결 방식
–
최신 버전i
1.1.0
레지스트리 공개i
2026년 11월 18일
코드 마지막 변경i
2026년 11월 18일
제작자
anilcancakir
웹사이트
anilcancakir.com
레지스트리 상태
활성

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 anilcancakir 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 어제

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/anilcancakir-tapir.svg)](https://mcp.popnx.com/en/servers/anilcancakir-tapir)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

웹 및 브라우저 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1609개 중 86%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1609개 중 98%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1609개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Tapir, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(1.1.0)은 어제 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Browser Use, changedetection.io (official), Apify MCP Server, Pomerado, Actionbook

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Browser Use

Browser agents and stealth cloud browsers for AI: run web tasks, fill forms, extract data.

제작자: browser-use널리 사용됨↓ 167.3만/주★ 12.1만29일 전 업데이트

컴퓨터 또는 클라우드✓ 서비스 회사 · browser-use.com

Apify MCP Server

Extract data from any website with thousands of scrapers, crawlers, and automations on Apify Store ⚡

제작자: apify널리 사용됨★ 1.7만그저께 업데이트

클라우드에서 실행✓ 서비스 회사 · apify.com

Pomerado

Connect your agents to any website. The cheaper, faster and more reliable alternative to browser use

제작자: Pomerado성장 중★ 1.8천어제 업데이트

클라우드에서 실행✓ 서비스 회사 · pomerado.ai

Actionbook

Let your AI agent operate any website through a real, logged-in browser session.

제작자: actionbook성장 중★ 1.6천31일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · actionbook.app
비슷한 항목과 비교
이 항목
Tapir
Browser Usechangedetection.io (official)Apify MCP ServerPomeradoActionbook
실행 위치컴퓨터에 설치 필요클라우드 또는 컴퓨터 설치 모두 가능클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요예아니요예아니요아니요
Claude에서 +로 추가아니요예아니요아니요아니요아니요
기본 점검3/35/53/34/44/44/4
라이선스MITMITApache-2.0MITMITApache-2.0
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Tapir

Give your AI agent eyes and hands on a running Flutter app.

Snapshot the Semantics tree, tap, type, scroll, screenshot and profile the live app from one CLI and one MCP server, with no flutter_test harness and no test file between actions.

Documentation · pub.dev · Issues

At a glance

FactValue
Packagetapir
Installflutter pub add tapir, then dart run tapir tapir:install
Importpackage:tapir/tapir.dart (TapirPlugin.install(), behind if (!kReleaseMode))
Entry pointsdart run tapir , ./bin/dowel , TapirPlugin.install(), TapirPlugin.enrichers, TapirDowelProvider (package:tapir/cli.dart), dart run tapir mcp:serve
PlatformsAny Flutter target that exposes a VM Service in a debug or profile build: Android, iOS, web, macOS, Windows, Linux; viewport and device emulation need Chrome with a CDP port; tapir_hot_reload_and_snap writes to the flutter run stdin FIFO, so it needs a POSIX host; on a Windows host mcp:install writes a dart run entry, never ./bin/dowel
RequiresDart 3.13, Flutter 3.47; a plugin of dowel (^1.0.5)
Dependenciesdowel, image, meta, wind_kit_diagnostics_contracts, yaml, the Flutter SDK
LicenseMIT

Install

flutter pub add tapir

dart run tapir tapir:install dart run tapir start --device=macos # dowel records the session every tapir:* command dials dart run tapir tapir:snap

tapir:install patches lib/main.dart (the import, WidgetsFlutterBinding.ensureInitialized() when missing, and TapirPlugin.install() inside a !kReleaseMode guard), then scaffolds the fast ./bin/dowel wrapper and registers tapir as a dowel plugin. Re-running it changes nothing. The installation guide also adds dowel as a direct dependency (dart pub add dowel). Wired by hand, main.dart looks like this:

import 'package:flutter/foundation.dart';

import 'package:flutter/widgets.dart'; import 'package:tapir/tapir.dart';

Future main() async { WidgetsFlutterBinding.ensureInitialized(); if (!kReleaseMode) { TapirPlugin.install(); } runApp(const MyApp()); // MyApp is the host app's root widget. }

The guard is !kReleaseMode, not kDebugMode: debug and profile builds carry tapir (tapir:perf_run measures a profile build) and a release build tree-shakes it. Without the guard tapir ships in release, and anyone who reaches that app's VM Service can drive it. --dart-define=TAPIR_DISABLE=1 skips registration in a build that must not expose the extensions. The example/ app gives each verb a live target widget.

Snapshot and refs

dart run tapir tapir:snap --interactiveOnly

- textbox "Email" [ref=e1]

typeable: true

- button "Sign in" [ref=e2]

TokenMinted byLifetime
e tapir:snapThe same Semantics node keeps its token across snapshots, and a token outlives its widget. A ref whose element left the tree is relocated by label (reresolved on the response) only when the snapshot recorded a binding for it, the live tree has the same number of nodes with that label and the match sits on the route the ref was minted on; otherwise it fails as defunct and you re-snap
q tapir:find, tapir:observeRe-resolved against the live tree on every action; survives rebuilds

Narrow a read with --within= , --interactiveOnly and --grep= ; they compose. --includeEnrichers adds Wind state under each W-widget that has a className: up to seven contract fields, of which bgColor and textColor appear only when they resolve (tapir:observe keeps only breakpoint and states unless you pass --includeEnrichers=full; the host calls Wind.installDebugResolver() from wind_kit, read through wind_kit_diagnostics_contracts) and Magic state (MagicTapirIntegration.install() from package:magic_devtools/tapir.dart, after Magic.init(); it exists only in a magic_devtools release built on tapir, and tapir:install warns and skips it otherwise; see Magic integration). A ref line ending in [offscreen] or [occluded] names why an action would fail before you try it.

Actions and the actionability gate

dart run tapir tapir:tap --ref=e2 --snapshot=diff

dart run tapir tapir:fill --ref=e1 --text="ada@example.com" --json

Gestures (tap, hover, drag, scroll, double_click, right_click, triple_click) and text verbs (type, clear, fill, press_key) dispatch real pointer and key events into the widget tree. tap, hover, drag, the click variants, type, fill and set_checkbox (on the control it taps) first pass the gate (clear, scroll, press_key and select_option skip it), in a fixed order, and a refusal names the reason an agent can branch on:

CheckRefusal substringRecovery
Defunct (preflight)defunct (...)Re-snap
Enablednot enabledRe-snap; the widget may enable later
Zero rectzero rectRe-snap or re-find
Off-viewport (scrolls into view first)off-viewporttapir:scroll into view, then retry
Stable across two framesnot stableWait for the animation; --no-checkStable
Receives events (hit test)obscured byDismiss the overlay (tapir:reset_overlays); --no-checkReceivesEvents

A green tick is dispatch, not effect. Add --json to print the whole response and read the effect block: effect.changed for tap and scroll, effect.verified and effect.value for type, fill and clear. When the hit test could not answer (routine on a web debug build) the response of a gated verb such as tap, type or fill carries a checks block with receivesEvents: indeterminate instead of a silent pass. A target tapir will not act on at all (a ref that is not a text field, say) answers the error type refused (code -32001), and a value it cannot use answers invalid_param. tapir:run "tap --ref=e5" "snap --grep Counter" batches verbs into one round trip.

Waiting and observing

dart run tapir tapir:observe --roles=button,textbox   # q<N> handles, re-resolved per action

dart run tapir tapir:wait_for --text="Welcome back" --timeoutMs=5000

VerbReturns
tapir:wait_forWaits for --text, --textGone or --expression
tapir:wait_for_network_idleWaits until in-flight HTTP requests stay at zero for --idleMs
tapir:observeA flat candidate list of interactive widgets with q handles: observe once, act many times (no model call inside tapir)
tapir:console, tapir:exceptionsIn-app debugPrint output and FlutterErrors, overflow included; --since= scopes errors to one action; --grep and --logger narrow the console buffer
tapir:get_routesThe router's location and the top page (tapir:navigate and tapir:navigate_back change it)

When the app is not producing frames (a hidden window or a backgrounded tab) tapir forces frames outside the web and reports framesForced: true; where it cannot, every response carries a warnings block rather than a stale answer that looks fresh. See frame production.

Screenshots and web

dart run tapir tapir:screenshot --output=shot.jpg

dart run tapir start --device=chrome --cdp-port=9333 dart run tapir tapir:device_profile --preset=pixel-8

SurfaceBehaviour
tapir:screenshotJPEG (default) or PNG of the viewport, or of one widget with --ref (and a sub-rect of it with --rect); --strict exits 1 without writing the file when the app is not producing frames (on a web session it covers --ref captures only)
Web screenshotWith --cdp-port, the CLI captures through CDP Page.captureScreenshot; the tapir_screenshot MCP tool stays in-isolate and can time out under CanvasKit, so prefer the CLI on web; a --cdp-port session cannot run tapir_evaluate (the web-server device has no evaluate)
tapir:device_profilePresets iphone-x, iphone-13, iphone-15-pro, pixel-5, pixel-8, ipad-pro-12.9, desktop-1440, desktop-1920 (viewport, DPR, touch, user agent); the emulation ends with the command, the window size stays. tapir:resize_viewport --width --height overrides the viewport until exit, or longer with --hold
tapir:hot_reload_and_snapHot reload, then snapshot, screenshot and recent exceptions in one round trip

Performance tracing

dart run tapir tapir:perf_begin --mode=attribution

dart run tapir tapir:tap --ref=e7 dart run tapir tapir:perf_end

VerbDoes
tapir:perf_begin, tapir:perf_endBracket one interaction; attribution ranks the widget builds that cost time next to Wind and Magic counters, timing reports frame timings you can quote. A session in which the engine rendered nothing is refused (refused: true, exit 1), never reported as zeros that read as fast
tapir:perf_insightThe rows behind one insight of the last report
tapir:perf_run, tapir:perf_compare, tapir:perf_campaignRepeat a scenario from a clean start and write medians, judge one run against another, run a campaign of scenarios from cold starts
tapir:perf_trace --out=trace.jsonThe last session as a Chrome Trace JSON for ui.perfetto.dev

MCP server and clients

The tapir_* tools ride on the dowel MCP server, so the client config key is dowel. dart run tapir mcp:install writes the entry into .mcp.json: ./bin/dowel mcp:serve when the fast wrapper exists on a POSIX host, and dart run tapir mcp:serve otherwise (always on Windows, where ./bin/dowel is not used). Standard config for any client that reads .mcp.json:

{ "mcpServers": { "dowel": { "command": "./bin/dowel", "args": ["mcp:serve"], "cwd": "." } } }
ClientInstall
Claude Codeclaude mcp add dowel -- ./bin/dowel mcp:serve, then /mcp reconnect dowel after a change
VS Codecode --add-mcp '{"name":"dowel","type":"stdio","command":"dart","args":["run","tapir","mcp:serve"]}'
Cursor.cursor/mcp.json (project) or ~/.cursor/mcp.json (user)
Windsurf~/.codeium/windsurf/mcp_config.json
Goose, WarpPaste the standard config into Goose (Advanced settings, Extensions, Add custom extension) or Warp (Settings, AI, Manage MCP Servers)
Claude Desktopclaude_desktop_config.json (macOS: ~/Library/Application Support/Claude/, Windows: %APPDATA%\Claude\)

| Codex | `codex mcp add dowel ./bin/dowel

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요