프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Canli Backtest

제작자: arhancanli버전 0.5.1i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.arhancanli/canli-backtest-mcp

설치

개요

제작자가 쓴 설명(영어 원문)

Lookahead-free backtests: point-in-time SEC factors, your prices, real costs, every variant counted.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • npmNode.js 설치(npx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "canli-backtest": {
      "command": "npx",
      "args": [
        "-y",
        "canli-backtest-mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add canli-backtest -- npx -y canli-backtest-mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "canli-backtest": {
      "command": "npx",
      "args": [
        "-y",
        "canli-backtest-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "canli-backtest": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "canli-backtest-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 8일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 arhancanli 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 18428개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 18428개 중 87%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 18428개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Canli Backtest, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.5.1)은 5일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, Winecellarbuilders

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 2113일 전 업데이트
설치

Winecellarbuilders

제작자: itsryanarmani

Find the team for your wine room.

클라우드에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

canli-backtest-mcp

Backtests an AI agent can trust. An MCP server that builds point-in-time factors from SEC filings, runs cross-sectional backtests of any signal on your own prices with no lookahead (enforced in code), charges costs on the actual trades, and records every variant in a trial ledger, so the best of a search is judged against the whole search instead of alone.

Local stdio only: your prices, signals and ledgers never leave your machine.

[canli-backtest-mcp on canlicapital.com](https://canlicapital.com/mcp-servers/backtest) · All Canli Capital MCP servers. Free, MIT-licensed. For every server behind one install, use canli-mcp.

Why

Three mistakes make most agent-run backtests look better than they are:

  1. Lookahead. Using a number before it was public: an annual figure in January that was filed in February, or a value that was later restated. pit_factor only uses what had been filed with the SEC by each date, as it stood then; backtest_signal only trades on signal rows dated at least lag_days trading days earlier, and stops if anything reaches past that.
  2. Free trading. Ignoring turnover. Positions drift with prices between rebalances, and costs are charged on the trades from those drifted positions to the new targets.
  3. Counting only the winner. An agent tries 200 variants and reports the best. With ledger, every run is recorded (in canli-validation-mcp's hash-chained ledger), and each reply gives the best run's deflated Sharpe after counting all of them, and the Sharpe that luck alone reaches.

Tools

toolwhat it does
list_factorsThe factors pit_factor builds and what each measures.
pit_factorA factor (roa, gross_margin, operating_margin, revenue_growth, asset_growth, accruals, or level: ) for your tickers, monthly, as known on each date. Writes a signal CSV.
backtest_signalRank on the signal, long the top quantile (and short the bottom), rebalance weekly, monthly, quarterly or every N days, with lag_days, cost_bps and an optional ledger.

Breadth lab, sweeps and labelled data

toolwhat it does
price_panelA price, dollar-volume and industry-group panel built from a fund's holdings (IVV for the S&P 500), ready for the tools below
breadth_signalsThe 24 cross-sectional signals the lab builds sleeves from, each with its reference
breadth_bookEvery signal inside every group of names as a sleeve, traded as one netted account: the book's Sharpe after costs, the netting saved, and its effective independent bets; writes the sleeves as a CSV with their specs
breadth_sweepA grid of book settings run in parallel on every core, or as shards other machines run and merge back (inputs, grid, gaps and duplicates checked); the best Sharpe is set against what the best of that many trials reaches by luck, and with split_date the chosen settings are scored after it
effective_betsHow many independent bets a set of return series holds (the participation ratio of their correlations), by series and by family
annotation_packet, annotation_agreement, annotation_goldBlind labelling packets of figures (or of a draft's figures) with guidelines and an answer key; agreement between labellers (Cohen's kappa); and a gold set with its datasheet

Size, crises and cross-validation

A backtest that assumes any size fills at the close flatters itself, so:

  • Size. Give backtest_signal a capital_usd and a dollar_volume_file. An order fills only up to max_participation of recent daily volume (10% unless you say otherwise) and pays square-root impact, with volume and volatility read from the days before each trade. The reply shows the Sharpe at $100k to $1B, and no Sharpe for a size the market could not take. Order-book depth is not modelled: it needs paid data.
  • Crises. Every reply holds the result against named crises, from the dot-com bust to the 2023 bank run. A crisis its dates do not fully cover is listed as untested, never as passed. crisis_replay does this for any returns file.
  • Cross-validation. cpcv takes every variant's returns and, for each choice of held-out blocks, chooses the best on the rest, with purge and embargo at the edges, then scores it on what was held out. You get a spread of out-of-sample results, not one path. Splits can run as shards on other machines and merge back.

A record, a league and a paper market

  • Proof ledger. proof_filings writes what companies filed into an append-only file, each line chained to the last and each batch signed, with a line for every figure a later filing changed. proof_file adds any file's hash, proof_verify checks the whole file and says which line first fails. It shows lines were not altered, not that a figure is right, and no record means only no record. Publish the head somewhere else, or the key holder could rewrite it all. The published ledger does that with a public attestation each month.
  • League. league_new, league_commit and league_score run a tournament scored after the fact: an entrant signs and commits a hash before a round closes and shows the file afterwards, and anyone with the files can rerun the table. Each record is set against the best luck gives across that many entrants. The top entrants, chosen on earlier rounds only, form a paper book. No prizes, no stakes, nobody's money.
  • Arena. arena_new, arena_orders and arena_step are a paper market for agents to trade in, cleared in a call auction, reproducible from a seed. Made-up assets and made-up money: it cannot reach anything real.
  • Agent exchange. exchange_new, exchange_join, exchange_view, exchange_orders, exchange_step and exchange_report are a closed paper market where different AI agents and scripted traders meet in limit order books, with margin rules and forced selling, so a shock can become a cascade. exchange_run runs a whole market of scripted traders in one call. Time moves in steps, each agent sees only its own account, and a hash of the tape lets anyone check a run. Made-up assets and money. The rules are in docs/AGENT_EXCHANGE.md.
  • Consensus. agent_consensus combines agents' probabilities and counts how many independent views they really hold, from how their errors move together: five models that share their mistakes are not five votes.
  • Diversifiers. find_diversifiers ranks candidates by the independent bets they add and how they behave on the book's worst days. Return is shown last and never used to rank.

Quick start

npx -y canli-backtest-mcp

Claude Code:

claude mcp add canli-backtest -- npx -y canli-backtest-mcp

Then ask: *"Build roa for these 200 tickers from 2015 to 2024, backtest it monthly on prices.csv with 10 bps costs, try quantiles 0.1, 0.2 and 0.3 in the ledger 'roa-search', and tell me whether the best one survives the search."*

Files

Both files are CSV with a date column (YYYY-MM-DD) and one column per ticker:

  • prices: closing prices, one row per trading day. Bring your own; adjust for splits and dividends if you want total returns. The server does not supply prices (vendor licences forbid passing them on).
  • signal: one row per date the values became known. pit_factor writes this; your own signal works too, as long as each row is dated by when it was available.

Empty cells are missing values, never zero.

What a result does not establish

  • Prices are yours: survivorship, splits, dividends and data errors in them pass straight into the result.
  • A backtest measures one path of history under these costs; it does not establish that the signal keeps working.
  • Costs are a flat rate per unit traded; market impact, short-borrow fees and financing are not charged unless included in cost_bps.
  • SEC values are what companies reported in XBRL, as filed; late filers, non-XBRL filers and tag changes can be missing.

Configuration

variabledefaultmeaning
CANLI_LEDGER_DIR~/.canli/ledgerswhere ledgers are kept (shared with canli-validation-mcp)
CANLI_CACHE_DIR~/.cache/canli-fundamentalsSEC data cache

Part of the Canli Capital MCP family

canli-validation-mcp (validators and the trial ledger), canli-fundamentals-mcp (SEC fundamentals point in time), canli-research-mcp (the open research record). Source: github.com/arhancanli/canlicapital. MIT licensed. Built by Arhan Canli.

PopNx에게 묻기