프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

StatCite — Verified Economic Statistics

제작자: asokore버전 1.17.0i★ –i클라우드에서 실행
레지스트리 이름io.github.asokore/statcite

설치

개요

제작자가 쓴 설명(영어 원문)

Cited economic statistics: World Bank, IMF, BIS, ECB, Caribbean central banks. Verify any figure.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://statcite.com/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http statcite https://statcite.com/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "statcite": {
      "url": "https://statcite.com/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "statcite": {
      "type": "http",
      "url": "https://statcite.com/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://statcite.com/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

아직 이 서버의 도구 목록을 읽지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 asokore 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    엔드포인트 응답

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    OAuth로 로그인

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    아직 점검하지 않았어요. 엔드포인트를 점검할 때 도구 목록을 읽어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32435개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32435개 중 73%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32435개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

StatCite — Verified Economic Statistics, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.17.0)은 14일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, Apify MCP Server

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

Apify MCP Server

제작자: apify

Extract data from any website with thousands of scrapers, crawlers, and automations on Apify Store ⚡

클라우드에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

StatCite

Economic statistics your AI can actually cite, with a verifier that catches the ones it invents.

· Live status · AI accuracy benchmark · Licence ledger · Verification guide

*Every figure, verdict and citation above is real output from a live call, captured by tools/make-demo-gif.py at build time. A model recalling 98% is not a strawman: it was roughly right a few years earlier, which is exactly how stale recall sounds.*

Free remote MCP server + REST API serving official economic statistics from the World Bank, IMF WEO and Fiscal Monitor (current vintage via the IMF DataMapper API, with a DBnomics fallback), BIS policy rates, ECB reference rates, and two regional central banks (the Eastern Caribbean Central Bank and the Central Bank of Barbados, covering Anguilla and Montserrat, which the World Bank does not report), where every number ships with its full citation: source, dataset, series ID, canonical URL, licence, retrieval date, a ready-to-paste citation sentence, and BibTeX/APA export formats.

The differentiator is verification, not lookup: verify_stat checks a claimed figure against the official series and returns match / close / mismatch / cannot_verify with diagnostics for the classic errors (wrong year, percent-vs-decimal, millions-vs-billions, sign flips). On a mismatch it re-judges the claim against the previous IMF vintage, so "was right when written, since revised" is never confused with "wrong". When the source cannot support a verdict, it says cannot_verify with the reason. It never guesses.

Three things people use it for

  1. Fact-check a draft. The fact_check MCP prompt + verify_claims audit every macro figure in a document, in batches of 15, each verdict carrying the citation for the correct number.
  2. Cited data for agent reports. get_indicator and country_snapshot return official series with paste-ready citations, honest projection labelling, and machine-readable "no published value exists" instead of silent gaps.
  3. Resolve source disagreements. compare_sources fetches one indicator from every official source in its chain and shows the spread (e.g. general-vs-central government debt definitions), each value with its own citation.

Install in one line

ClientHow
Claude (web/desktop)Open StatCite in Claude's connector directory and click Connect. Fallback: Settings → Connectors → Add custom connector → https://statcite.com/mcp
Claude Code/plugin marketplace add asokore/statcite then /plugin install statcite@statcite (also installs the verify-then-cite skill), or just the server: claude mcp add --transport http statcite https://statcite.com/mcp
CursorInstall in Cursor · or {"mcpServers":{"statcite":{"url":"https://statcite.com/mcp"}}}
VS CodeInstall in VS Code · Insiders · or code --add-mcp '{"name":"statcite","type":"http","url":"https://statcite.com/mcp"}'
ChatGPTDeveloper mode → add MCP server, No Authentication (implements the deep-research search/fetch pair)
Cline / stdio-onlynpx -y mcp-remote@0.14.3 https://statcite.com/mcp (pinned, so a client restart never pulls a new release. See llms-install.md)

No signup, no API key, no OAuth.

Side effects

StatCite is a remote server. Over HTTP, calling it installs nothing and runs nothing on your machine. This is what each kind of call does, and where.

OperationCalls out from StatCite's serverWrites on your machineWrites anywhere elseRecorded by StatCite
get_indicator, get_series, compare_sources, country_snapshot, inflation_adjust, fx_convert, fetchYes, to the official source APIs named in the citation (World Bank, IMF, ECB, BIS and DBnomics, with exchange rates through Frankfurter, a relay of ECB reference rates), plus the published CaribStat corpus of ECCB and Central Bank of Barbados series at asokore.github.io/caribstatNoNoOne aggregate usage row
verify_stat, verify_claimsYes, the same source APIs, to fetch the official figureNoNoOne aggregate usage row, with the verdict kind
search_indicatorsOnly to DBnomics, and only when fewer than five results were found locallyNoNoOne aggregate usage row
searchNoNoNoOne aggregate usage row
list_sourcesNoNoNoOne aggregate usage row
Connecting a client over HTTPNoOnly the server entry your client saves in its own configNoNothing
The stdio bridge (mcp-remote)Nonpx downloads mcp-remote into the npm cache and runs it locally, and mcp-remote creates its own config folder (~/.mcp-auth unless MCP_REMOTE_CONFIG_DIR is set)NoNothing

The usage row holds the transport, the tool name, the registry indicator key, the ISO3 country code, the verify verdict kind, the outcome and the duration. Every one of those comes from a closed list, so nothing you type is stored. No IP address, user agent, header, session id, query text or claimed value is recorded. The code is server/src/core/analytics.ts and the policy is at statcite.com/privacy.

Every get_indicator and get_series result also carries a limitations list: codes for what the figure is not, such as a projection, a fallback source's figure, a modelled estimate, a value rounded by the source or a number StatCite computed. A latest value more than 3 years older than the year it was retrieved carries stale_latest. When the primary source served it and the registry lists other sources, it also carries stale_primary, which names the sources StatCite did not query. An IMF value before the projection boundary StatCite infers carries outturn_unconfirmed, because the IMF data StatCite reads does not mark which years are outturns. Each code is read from a structured field of the result or from the indicator registry, and an empty list means none of those conditions was detected.

Make your agent use it without being asked

Connecting a server puts the tools on the shelf. It does not make an agent reach for them, and an agent that is confident about a number will usually answer from memory. One standing rule fixes that. Paste this into CLAUDE.md or AGENTS.md, into Cursor Settings → Rules, or into your ChatGPT project instructions:

Before stating any country-level economic figure, get it from StatCite (get_indicator) or check it (verify_stat), even if you think you know it, and include the citation_text it returns.

Try it in 5 seconds

curl "https://statcite.com/v1/verify?indicator=inflation_cpi&country=USA&period=2023&value=4.1"

curl "https://statcite.com/v1/indicator/govt_debt_gdp?country=JPN&latest_only=true" curl "https://statcite.com/v1/fx?amount=100&from=USD&to=BBD" curl -X POST "https://statcite.com/v1/verify_claims" -H "content-type: application/json" \ -d '{"claims":[{"indicator":"inflation_cpi","country":"USA","period":"2023","claimed_value":4.1}]}'

Tools

get_indicator · verify_stat · verify_claims · compare_sources · get_series · search_indicators · country_snapshot · inflation_adjust · fx_convert · list_sources · search · fetch, plus 3 MCP prompts (fact_check, country_brief, cite_this_stat) and 3 resources (registry, licence ledger, SIDS list). 42 active curated indicators, 200+ economies, ~120 currencies. All read-only. Details: docs, and the verification guide for the method.

Repo layout

server/        Cloudflare Worker: MCP endpoint + REST API + tests (zero runtime deps)

site/ statcite.com static site (landing, docs, llms.txt, OpenAPI, legal) apify/ Metered twin: Apify actor (pay-per-event) bundling the same core skill/ Claude skill teaching agents the verify-then-cite workflow distribution/ Registry manifests, submission steps, launch copy bench/ pre-registered AI-accuracy benchmark: COVENANT.md, METHODOLOGY.md, question bank, frozen snapshots, runs/ (R1 REPORT + ADDENDA) docs/ Research report, strategy, launch plan, monetization roadmap BRIEF.md Context + mandate for anyone (human or agent) picking this up HANDOFF.md Deployment runbook (the mechanical steps to take it live) CLAUDE.md Working guide: commands, architecture, invariants

Develop

cd server

npm install npm test # fixture-backed, no network npm run smoke # live end-to-end against real upstream APIs npm run dev # wrangler dev (local Workers runtime + static site) npm run deploy # wrangler deploy

Data & licensing

StatCite does not originate the underlying statistical observations. Derived values and verification verdicts are calculated transparently from cited source data with the method disclosed. World Bank (CC BY 4.0); IMF (published IMF statistical data may be copied, redistributed and used in derivative works with attribution as "Source: International Monetary Fund, \ , \ ", plus data-integrity, downstream-communication and free-of-charge-disclosure conditions, all carried verbatim in every citation's license field); BIS (reproduction and redistribution with attribution); ECB (attribution; reference rates informational); Eurostat via DBnomics (CC BY 4.0); FRED is not served. Its Services Terms of Use (clauses (p) and (q), https://fred.stlouisfed.org/legal/) reserve FRED content from AI/ML use and from caching or redistribution. IMF WEO/Fiscal Monitor projections are labeled as projections. The primary IMF path is the DataMapper API (current edition, verbatim edition label). If unavailable, StatCite falls back to the newest edition DBnomics has ingested, which can lag the IMF's release calendar, so responses cite the resolved vintage, flag stale ones, and every fallback is disclosed (verify_stat/verify_claims return cannot_verify with the fallback value as indicative when the primary failed transiently, rather than judging against a substitute that may differ by definition or vintage. A series the primary permanently lacks is judged against its stable fallback source with disclosure). Server code: MIT.

Built and curated by a professional economist. Contact: hello@statcite.com

PopNx에게 묻기