프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요 로그인

Price Drop Watch Alert History

✓ bestremotetools.com

제작자: theluckystrike버전 0.21.0i★ 2 (다른 저장소의 별)i내 컴퓨터에서 실행공식 사이트 ↗
레지스트리 이름com.bestremotetools/price-drop-watch-alert-history

설치 방법

할 수 있는 일

Check and watch prices on ordinary shop pages, keep the history and alert on a target you set.

제작자가 쓴 원문

  • 연결 방식 내 컴퓨터에서 실행
  • 계정 또는 키 키 필요 없음
  • 분류 온라인 쇼핑몰 및 결제

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수12/100

품질: 기본 점검 2/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 2/3 통과 · 내 컴퓨터에서 실행돼요

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

  1. 제작자 설치 파일 내려받기

    제작자의 .mcpb 파일 다운로드

    .mcpb 파일은 제작자에게서 바로 온 것으로, 우리는 바꾸지 않았어요

  2. 파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기

  3. 해 보기

    Price Drop Watch Alert History을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Price Drop Watch Alert History을 쓰고 있다고 하거나 답에 Price Drop Watch Alert History 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Price Drop Watch Alert History에 연결할 수 없어요

Price Drop Watch Alert History는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Price Drop Watch Alert History에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

B · 온라인 쇼핑몰 및 결제에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code는 아직 Price Drop Watch Alert History에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Price Drop Watch Alert History에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

Cursor는 아직 Price Drop Watch Alert History에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Price Drop Watch Alert History에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

VS Code는 아직 Price Drop Watch Alert History에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Price Drop Watch Alert History에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Price Drop Watch Alert History을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

직접 입력할 값

  • MCP_LICENSE_KEY 비밀 env
    선택 사항인 Pro 라이선스 키(MCPL1....). 오프라인으로 검증됩니다
    영어 원문 보기Optional Pro license key (MCPL1....). Verified offline.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

GitHub 스타i
2 (다른 저장소의 별)
이 항목은 다른 사람의 저장소를 가리켜서 별을 순위에 넣지 않아요
주간 다운로드i
npm/PyPI에 없음
확인된 도메인
✓ bestremotetools.com
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.21.0
레지스트리 공개i
2026년 9월 9일
코드 마지막 변경i
2026년 11월 18일
제작자
theluckystrike
패키지
mcpb: …/price-tracker.mcpb
웹사이트
mcp.zovo.one
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검

  • ! 주의

    제작자와 저장소 일치

    게시자(bestremotetools.com)가 저장소 소유자(theluckystrike)가 아니에요. 다른 사람이 등록했을 수 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 그저께

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

확인 안 함: 버전이 있는 npm과 PyPI 패키지만 확인할 수 있습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/bestremotetools-price-drop-watch-alert-history.svg)](https://mcp.popnx.com/en/servers/bestremotetools-price-drop-watch-alert-history)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

온라인 쇼핑몰 및 결제 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 2969개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 2969개 중 27%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 2969개 중 59%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Price Drop Watch Alert History, 안전한가요?

해당하는 기본 점검 3개 중 2개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 그저께 변경됐고, 최신 버전(0.21.0)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 MCPB도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Stripe MCP, flightclaw, Trade It, Marketplace Ad Pros: Amazon Ads & Seller Central, idealo MCP Server

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Stripe MCP

MCP server integrating with Stripe - tools for customers, products, payments, and more.

제작자: stripe널리 사용됨★ 2.1천13개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · stripe.com

flightclaw

Search ~300 airlines and book flights with a checkout link. OAuth sign-in by email code.

제작자: flightclaw성장 중★ 872개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · flightclaw.com

Trade It

Connect brokerage accounts to AI assistants: holdings, orders, asset lookup, and approved trading.

제작자: trade-it-inc초기★ 6235일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · tradeit.app

idealo MCP Server

Search products, compare prices and discover deals across 6 European markets with your AI assistant.

제작자: idealo초기★ 286개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · mcp.idealo.com
비슷한 항목과 비교
이 항목
Price Drop Watch Alert History
Stripe MCPflightclawTrade ItMarketplace Ad Pros: Amazon Ads & Seller Centralidealo MCP Server
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요예아니요아니요아니요아니요
기본 점검2/34/44/45/54/44/4
라이선스MITMITMITCC0-1.0MITMIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

mcp-price-tracker

Featured on [Awesome MCP Servers](https://mcpservers.org) - directory listing | live hosted endpoint, free tier, no signup.

Ask your assistant what something costs right now. Point it at any product page and it reads the price off the page, remembers it, and tells you next time whether the price moved, how far, and whether it reached the number you were waiting for. It works on ordinary shop pages by reading the structured data most stores already publish (JSON-LD, Open Graph, microdata) and falling back to the visible price when they do not. When a large retailer blocks automated requests it says so plainly and lets you record the price yourself so the history stays intact. Everything is stored in a JSON file on your own machine.

Built by theluckystrike.

In the [official MCP Registry](https://registry.modelcontextprotocol.io/v0.1/servers/io.github.theluckystrike%2Fprice-tracker-drop-alert-watch/versions/latest) (io.github.theluckystrike/price-tracker-drop-alert-watch).

Watch any product page for price drops from chat, no scraping service, no account, all local.

60-second install

npm publish for @theluckystrike/mcp-price-tracker is pending. Until then, the .mcpb one-click bundle or a clone+build is the working path, both are verified below.

One-click (.mcpb): download price-tracker.mcpb from the latest release and double-click it in Claude Desktop: https://github.com/theluckystrike/mcp-servers/releases/latest

(claude_desktop_config.json):

{

"mcpServers": { "price-tracker": { "command": "npx", "args": ["-y", "@theluckystrike/mcp-price-tracker"] } } }

Claude Code:

claude mcp add price-tracker -- npx -y @theluckystrike/mcp-price-tracker

(.cursor/mcp.json):

{

"mcpServers": { "price-tracker": { "command": "npx", "args": ["-y", "@theluckystrike/mcp-price-tracker"] } } }

The npx form above starts working the moment the package is published. Until then, use the .mcpb bundle above, or build from source with exactly these three commands:

git clone https://github.com/theluckystrike/mcp-servers.git && cd mcp-servers

npm install npm run build -w packages/mcp-license -w servers/price-tracker

Then point your client's command at node with one arg: the absolute path to servers/price-tracker/dist/index.js.

To run in Pro mode set MCP_LICENSE_KEY in the same config block, or call license_activate once with your key.

Tools

ToolWhat it does
price_checkFetch a page now; returns price, currency, title, extraction confidence and the change against the last stored observation for that URL. No watch needed.
watch_addStart tracking a URL. Stores the first observation. Optional label, target_price, currency.
watch_listEvery watch with current price, min, max, change, target, confidence and source.
watch_removeStop tracking, by id or url.
watch_refreshRe-fetch one watch (id) or all of them (all: true); appends observations and returns current, previous, min, max, change % and target-hit flags. This is the only thing that checks prices.
price_historyStored observations for one watch, oldest first, optional limit.
price_add_manualRecord a price you read yourself, for shops that block bots. Creates the watch if needed.
alerts_pendingWatches whose latest price is at or below target, or which dropped 5% or more since the previous observation. Free.
license_statusFree or Pro, and where to upgrade.
license_activateActivate a Pro key. Verified offline.

Resource: prices://watches - JSON of every watch with its latest price.

Prompt: check_prices - refreshes every watch and summarises the drops and target hits in one command.

What you can say

You sayTool
"What does this cost right now: \ ?"price_check
"Watch that page and alert me if it goes under 40."watch_add
"Show me everything I'm watching and whether anything dropped."watch_refresh (all) then watch_list
"Stop tracking that laptop, I bought it elsewhere."watch_remove
"Refresh my watches."watch_refresh
"What's the price history on the bookshelf I'm watching?"price_history
"I checked myself, it's 39.99 GBP in-store, log that."price_add_manual
"Has anything I'm watching hit its target or dropped a lot?"alerts_pending
"Am I on the free plan or Pro?"license_status
"Here's my license key, activate it."license_activate

Worked example

A real run against books.toscrape.com, from docs/USER_VALUE_R2.md, with WebFetch/WebSearch disallowed so the price-tracker's own tools had to answer:

You: What does this cost right now: https://books.toscrape.com/catalogue/...?

price_check { url: "https://books.toscrape.com/catalogue/..." } -> price 51.77, currency GBP, source regex-fallback, confidence low

Assistant: GBP 51.77. Confidence: low (regex-fallback) -- this page has no structured price data, so I read it from the visible text.

The confidence label is not decoration: books.toscrape.com carries no JSON-LD or microdata, so this is the one case in testing where the regex fallback was the only path to a number, and the model relayed the "low" label to the user unprompted rather than stating 51.77 as a fact.

Alerts: nothing runs in the background

There is no scheduler and no daemon. A watch is a stored history, not a subscription: prices are re-read only when watch_refresh runs, and alerts_pending reports on what is already stored. The working pattern is to say "refresh my watches" at the start of a session (or run the check_prices prompt), then ask what dropped.

Free vs Pro

FreePro ($19 one-time)
price_checkUnlimitedUnlimited
alerts_pendingYes, unlimitedYes, unlimited
Watches3Unlimited
History per watchLast 30 observationsFull history
watch_refresh one itemYesYes
watch_refresh all at onceNoYes
price_add_manualYesYes
Redirect check and extraction confidenceYesYes

Get Pro - $19 for this server, $39 for every server, lifetime.

How prices are read

In order: JSON-LD Product/Offer (price, priceCurrency, lowPrice), microdata itemprop="price", Open Graph og:price:amount / product:price:amount, meta itemprop, data-price attributes, common price class and id hints (including Amazon's a-offscreen), and finally a regex over the visible text of the first 200 KB. European and US separators are both understood, so 1.299,00 EUR and 1,299.00 USD both become 1299.00.

Prices are stored as decimal strings in the major unit with a . decimal separator and no grouping, for example "1299.00". Timestamps are ISO 8601 UTC.

Every reading carries a confidence: high for JSON-LD, microdata, meta itemprop and Open Graph; medium for data-price attributes and price class or id hints; low for the regex fallback. A low reading on a page with no product title is reported but never stored.

Where a page describes several products in JSON-LD (recommendations, "customers also bought"), the offers of one product are never pooled with another's: the product whose name matches the page title wins, otherwise the first product carrying offers. Crossed-out and previous prices ( , , , and classes such as old-price, was, compare-at-price, list-price, rrp) are skipped, so a struck 199 next to a live 99 reports 99. An ISO code written next to the number ("$10 USD") wins over the currency guessed from the domain, and twitter:data1 - free text such as "Free shipping over $50" - is not read as a price.

Pages are fetched with a desktop browser User-Agent, a 12 second timeout, redirects followed, and a 2 MB body cap. After the fetch the final URL is compared with the one you asked for: if the shop redirected off the product path - a different path depth, a category or home page, or a generic title such as "Products", "Home", the shop name alone, or "not found" - you get the shop redirected to , which is not a product page instead of the cheapest item on the listing it landed on. A redirect that only inserts a canonical slug in front of the same product id or path (Newegg, Amazon /dp/, Zalando-style URLs) is accepted, not refused.

How it stores data

Watches and their price history live in one JSON file: ${XDG_DATA_HOME:-~/.local/share}/mcp-servers/price-tracker/watches.json. Every mutation (watch_add, watch_remove, watch_refresh, price_add_manual) happens under an advisory lock file, .../price-tracker/.lock, held across the load-mutate-save cycle so two refreshes running at once cannot interleave. price_check and read-only tools do not need the lock. Saves write to a temporary file and rename it into place, so an interrupted write cannot leave a half-written file. To back up your watch history, copy watches.json.

Only a missing file counts as "no watches yet". If watches.json exists but cannot be read or parsed, the server never treats it as empty: the unreadable bytes are moved to watches.json.corrupt- , the fault is written to stderr, and every tool answers with an error naming that file until the server is restarted. A damaged database can therefore never be silently overwritten by the next price you record.

Limits and honest caveats

  • Real-world extraction success is roughly 5 of 12 on a mixed sample of major retailers: five sites returned an outright bot-wall 403 (H&M, Allegro, MediaMarkt, Home Depot, Etsy), one timed out (Best Buy), and the rest split between correct prices and one intentionally refused reading (a redirect off the product page). This is a property of the open web, not a bug the server can fix, there is no headless browser or CAPTCHA solver here, by design (no native deps, no paid API). price_add_manual is the working answer for a blocked shop.
  • There is no background job. Nothing checks prices unless you (or your client, via a scheduled script you run yourself) call watch_refresh. This is not a missing feature; a local stdio server has no business running a daemon on your machine.
  • Free tier caps watches at 3 and history at the last 30 observations per watch; price_check and alerts_pending are unlimited on free.
  • A low-confidence regex reading is still reported, but never silently treated as certain, pass it on to the user as an estimate, not a fact.

Troubleshooting

  • `npx` hangs or fails to find the package: npm publish for this package is pending. Use the .mcpb bundle or the clone-and-build path above until it lands.
  • Using the `.mcpb` bundle: it installs into Claude Desktop directly; there is no separate config step.
  • Using the clone path: the server binary is servers/price-tracker/dist/index.js after npm run build. Point your client's command at node with that absolute path as the only argument.
  • Node version: requires Node >= 18. Check with node -v.
  • A watch always errors "not a product page": the shop redirected you off the URL you gave it (a category page, home page, or a generic title). Fetch the exact product URL again from the shop and re-add the watch, or use price_add_manual if the shop keeps redirecting.
  • A shop returns 403 every time: it is blocking automated requests. This is expected for a subset of large retailers (see Limits above); use `price_add_manual

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요