프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

TrueNAS SCALE

제작자: cedricziel버전 0.4.2i★ 2i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.cedricziel/truenas-mcp

설치 방법

What it does

Inspect and manage TrueNAS SCALE storage, shares, apps and system state with your own API key

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed · 1 setting to fill in (TRUENAS_MCP_TARGET)
  • Category 기타

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기6/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수18/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

TrueNAS SCALE 설치해 줘. https://mcp.popnx.com/i/cedricziel-truenas-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

설정 1개 입력 필요 (TRUENAS_MCP_TARGET) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server TrueNAS SCALE을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "truenas": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "TRUENAS_MCP_TARGET", "ghcr.io/cedricziel/truenas-mcp:0.4.2" ], "env": { "TRUENAS_MCP_TARGET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) TRUENAS_MCP_TARGET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 TrueNAS SCALE의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • TRUENAS_MCP_TARGET 관리할 TrueNAS 호스트이며, 선택적으로 host:port 형식을 쓸 수 있습니다. TrueNAS SCALE 25.04 이상이 필요합니다.
      영어 원문 보기TrueNAS host to manage, optionally `host:port`. Requires TrueNAS SCALE 25.04 or later.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  3. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  4. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "truenas": {
          "command": "docker",
          "args": [
            "run",
            "-i",
            "--rm",
            "-e",
            "TRUENAS_MCP_TARGET",
            "ghcr.io/cedricziel/truenas-mcp:0.4.2"
          ],
          "env": {
            "TRUENAS_MCP_TARGET": "your-value"
          }
        }
      }
    }
  5. Claude를 끄고 다시 열기

  6. 해 보기

    TrueNAS SCALE을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 TrueNAS SCALE을 쓰고 있다고 하거나 답에 TrueNAS SCALE 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • TRUENAS_MCP_ALLOW_PLAINTEXT TLS 없이 MCP를 제공합니다. 리스너가 loopback에만 게시되므로 여기서 설정합니다. 포트에 다른 곳에서 접근할 수 있다면 이를 제거하고 TRUENAS_MCP_TLS_CERT/KEY를 지정하세요.
    영어 원문 보기Serve MCP without TLS. Set here because the listener is published on loopback only; drop it and supply TRUENAS_MCP_TLS_CERT/KEY if the port is reachable from elsewhere.
    · 기본값 true
  • TRUENAS_MCP_TARGET_INSECURE TrueNAS 인증서를 검증하지 않고 허용하되 연결은 암호화된 상태로 유지합니다. TrueNAS는 CN=localhost용 자체 서명 인증서를 기본 제공하므로, 접속할 수 있는 어떤 주소로도 검증에 통과하지 않습니다.
    영어 원문 보기Accept the TrueNAS certificate unverified while keeping the connection encrypted. TrueNAS ships a self-signed certificate for `CN=localhost`, so no address you can reach it by will validate.
    · 기본값 false
  • TRUENAS_MCP_ENABLE_WRITES 데이터를 변경하는 도구를 노출합니다. 기본값은 읽기 전용입니다. 복구할 수 없는 작업은 어느 경우든 접근할 수 없도록 유지됩니다.
    영어 원문 보기Expose the mutating tools. Read-only by default; unrecoverable operations stay unreachable either way.
    · 기본값 false

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 TrueNAS SCALE에 연결할 수 없어요

TrueNAS SCALE는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · TrueNAS SCALE에 연결되는 앱 쓰기

  • 설정 1개 입력 필요 (TRUENAS_MCP_TARGET) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • 설정 1개 입력 필요 (TRUENAS_MCP_TARGET) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
  • 설정 1개 입력 필요 (TRUENAS_MCP_TARGET) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
  • 설정 1개 입력 필요 (TRUENAS_MCP_TARGET) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

B · 기타에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

설정 1개 입력 필요 (TRUENAS_MCP_TARGET) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server TrueNAS SCALE을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user truenas --env TRUENAS_MCP_TARGET=your-value -- docker run -i --rm -e TRUENAS_MCP_TARGET ghcr.io/cedricziel/truenas-mcp:0.4.2 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) TRUENAS_MCP_TARGET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 TrueNAS SCALE의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • TRUENAS_MCP_TARGET 관리할 TrueNAS 호스트이며, 선택적으로 host:port 형식을 쓸 수 있습니다. TrueNAS SCALE 25.04 이상이 필요합니다.
      영어 원문 보기TrueNAS host to manage, optionally `host:port`. Requires TrueNAS SCALE 25.04 or later.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  3. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  4. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user truenas --env TRUENAS_MCP_TARGET=your-value -- docker run -i --rm -e TRUENAS_MCP_TARGET ghcr.io/cedricziel/truenas-mcp:0.4.2
  5. Claude Code에서 /mcp 입력

    TrueNAS SCALE이 목록에 있고 연결됨으로 보이면 돼요

  6. 해 보기

    TrueNAS SCALE을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 TrueNAS SCALE을 쓰고 있다고 하거나 답에 TrueNAS SCALE 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • TRUENAS_MCP_ALLOW_PLAINTEXT TLS 없이 MCP를 제공합니다. 리스너가 loopback에만 게시되므로 여기서 설정합니다. 포트에 다른 곳에서 접근할 수 있다면 이를 제거하고 TRUENAS_MCP_TLS_CERT/KEY를 지정하세요.
    영어 원문 보기Serve MCP without TLS. Set here because the listener is published on loopback only; drop it and supply TRUENAS_MCP_TLS_CERT/KEY if the port is reachable from elsewhere.
    · 기본값 true
  • TRUENAS_MCP_TARGET_INSECURE TrueNAS 인증서를 검증하지 않고 허용하되 연결은 암호화된 상태로 유지합니다. TrueNAS는 CN=localhost용 자체 서명 인증서를 기본 제공하므로, 접속할 수 있는 어떤 주소로도 검증에 통과하지 않습니다.
    영어 원문 보기Accept the TrueNAS certificate unverified while keeping the connection encrypted. TrueNAS ships a self-signed certificate for `CN=localhost`, so no address you can reach it by will validate.
    · 기본값 false
  • TRUENAS_MCP_ENABLE_WRITES 데이터를 변경하는 도구를 노출합니다. 기본값은 읽기 전용입니다. 복구할 수 없는 작업은 어느 경우든 접근할 수 없도록 유지됩니다.
    영어 원문 보기Expose the mutating tools. Read-only by default; unrecoverable operations stay unreachable either way.
    · 기본값 false

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

설정 1개 입력 필요 (TRUENAS_MCP_TARGET) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server TrueNAS SCALE을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "truenas": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "TRUENAS_MCP_TARGET", "ghcr.io/cedricziel/truenas-mcp:0.4.2" ], "env": { "TRUENAS_MCP_TARGET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) TRUENAS_MCP_TARGET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 TrueNAS SCALE의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • TRUENAS_MCP_TARGET 관리할 TrueNAS 호스트이며, 선택적으로 host:port 형식을 쓸 수 있습니다. TrueNAS SCALE 25.04 이상이 필요합니다.
      영어 원문 보기TrueNAS host to manage, optionally `host:port`. Requires TrueNAS SCALE 25.04 or later.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  3. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    TrueNAS SCALE 설정에서 TRUENAS_MCP_TARGET가 비어 있어요. 내 키를 넣고 저장하세요

  5. Cursor에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    TrueNAS SCALE을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 TrueNAS SCALE을 쓰고 있다고 하거나 답에 TrueNAS SCALE 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • TRUENAS_MCP_ALLOW_PLAINTEXT TLS 없이 MCP를 제공합니다. 리스너가 loopback에만 게시되므로 여기서 설정합니다. 포트에 다른 곳에서 접근할 수 있다면 이를 제거하고 TRUENAS_MCP_TLS_CERT/KEY를 지정하세요.
    영어 원문 보기Serve MCP without TLS. Set here because the listener is published on loopback only; drop it and supply TRUENAS_MCP_TLS_CERT/KEY if the port is reachable from elsewhere.
    · 기본값 true
  • TRUENAS_MCP_TARGET_INSECURE TrueNAS 인증서를 검증하지 않고 허용하되 연결은 암호화된 상태로 유지합니다. TrueNAS는 CN=localhost용 자체 서명 인증서를 기본 제공하므로, 접속할 수 있는 어떤 주소로도 검증에 통과하지 않습니다.
    영어 원문 보기Accept the TrueNAS certificate unverified while keeping the connection encrypted. TrueNAS ships a self-signed certificate for `CN=localhost`, so no address you can reach it by will validate.
    · 기본값 false
  • TRUENAS_MCP_ENABLE_WRITES 데이터를 변경하는 도구를 노출합니다. 기본값은 읽기 전용입니다. 복구할 수 없는 작업은 어느 경우든 접근할 수 없도록 유지됩니다.
    영어 원문 보기Expose the mutating tools. Read-only by default; unrecoverable operations stay unreachable either way.
    · 기본값 false

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

설정 1개 입력 필요 (TRUENAS_MCP_TARGET) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server TrueNAS SCALE을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "truenas": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "-e", "TRUENAS_MCP_TARGET", "ghcr.io/cedricziel/truenas-mcp:0.4.2" ], "env": { "TRUENAS_MCP_TARGET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) TRUENAS_MCP_TARGET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 TrueNAS SCALE의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • TRUENAS_MCP_TARGET 관리할 TrueNAS 호스트이며, 선택적으로 host:port 형식을 쓸 수 있습니다. TrueNAS SCALE 25.04 이상이 필요합니다.
      영어 원문 보기TrueNAS host to manage, optionally `host:port`. Requires TrueNAS SCALE 25.04 or later.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  3. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    TrueNAS SCALE 설정에서 TRUENAS_MCP_TARGET가 비어 있어요. 내 키를 넣고 저장하세요

  5. VS Code에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    TrueNAS SCALE을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 TrueNAS SCALE을 쓰고 있다고 하거나 답에 TrueNAS SCALE 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • TRUENAS_MCP_ALLOW_PLAINTEXT TLS 없이 MCP를 제공합니다. 리스너가 loopback에만 게시되므로 여기서 설정합니다. 포트에 다른 곳에서 접근할 수 있다면 이를 제거하고 TRUENAS_MCP_TLS_CERT/KEY를 지정하세요.
    영어 원문 보기Serve MCP without TLS. Set here because the listener is published on loopback only; drop it and supply TRUENAS_MCP_TLS_CERT/KEY if the port is reachable from elsewhere.
    · 기본값 true
  • TRUENAS_MCP_TARGET_INSECURE TrueNAS 인증서를 검증하지 않고 허용하되 연결은 암호화된 상태로 유지합니다. TrueNAS는 CN=localhost용 자체 서명 인증서를 기본 제공하므로, 접속할 수 있는 어떤 주소로도 검증에 통과하지 않습니다.
    영어 원문 보기Accept the TrueNAS certificate unverified while keeping the connection encrypted. TrueNAS ships a self-signed certificate for `CN=localhost`, so no address you can reach it by will validate.
    · 기본값 false
  • TRUENAS_MCP_ENABLE_WRITES 데이터를 변경하는 도구를 노출합니다. 기본값은 읽기 전용입니다. 복구할 수 없는 작업은 어느 경우든 접근할 수 없도록 유지됩니다.
    영어 원문 보기Expose the mutating tools. Read-only by default; unrecoverable operations stay unreachable either way.
    · 기본값 false

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? TrueNAS SCALE을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user truenas --env TRUENAS_MCP_TARGET=your-value -- docker run -i --rm -e TRUENAS_MCP_TARGET ghcr.io/cedricziel/truenas-mcp:0.4.2

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "truenas": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "TRUENAS_MCP_TARGET",
        "ghcr.io/cedricziel/truenas-mcp:0.4.2"
      ],
      "env": {
        "TRUENAS_MCP_TARGET": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "truenas": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "TRUENAS_MCP_TARGET",
        "ghcr.io/cedricziel/truenas-mcp:0.4.2"
      ],
      "env": {
        "TRUENAS_MCP_TARGET": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "truenas": {
      "type": "stdio",
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "TRUENAS_MCP_TARGET",
        "ghcr.io/cedricziel/truenas-mcp:0.4.2"
      ],
      "env": {
        "TRUENAS_MCP_TARGET": "your-value"
      }
    }
  }
}

직접 입력할 값

  • TRUENAS_MCP_TARGET 필수 env
    관리할 TrueNAS 호스트이며, 선택적으로 host:port 형식을 쓸 수 있습니다. TrueNAS SCALE 25.04 이상이 필요합니다.
    영어 원문 보기TrueNAS host to manage, optionally `host:port`. Requires TrueNAS SCALE 25.04 or later.
  • TRUENAS_MCP_ALLOW_PLAINTEXT env
    TLS 없이 MCP를 제공합니다. 리스너가 loopback에만 게시되므로 여기서 설정합니다. 포트에 다른 곳에서 접근할 수 있다면 이를 제거하고 TRUENAS_MCP_TLS_CERT/KEY를 지정하세요.
    영어 원문 보기Serve MCP without TLS. Set here because the listener is published on loopback only; drop it and supply TRUENAS_MCP_TLS_CERT/KEY if the port is reachable from elsewhere.
  • TRUENAS_MCP_TARGET_INSECURE env
    TrueNAS 인증서를 검증하지 않고 허용하되 연결은 암호화된 상태로 유지합니다. TrueNAS는 CN=localhost용 자체 서명 인증서를 기본 제공하므로, 접속할 수 있는 어떤 주소로도 검증에 통과하지 않습니다.
    영어 원문 보기Accept the TrueNAS certificate unverified while keeping the connection encrypted. TrueNAS ships a self-signed certificate for `CN=localhost`, so no address you can reach it by will validate.
  • TRUENAS_MCP_ENABLE_WRITES env
    데이터를 변경하는 도구를 노출합니다. 기본값은 읽기 전용입니다. 복구할 수 없는 작업은 어느 경우든 접근할 수 없도록 유지됩니다.
    영어 원문 보기Expose the mutating tools. Read-only by default; unrecoverable operations stay unreachable either way.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
npm/PyPI에 없음
연결 방식
내 컴퓨터에서 실행
전송 방식
streamable-http
최신 버전i
0.4.2
카테고리i
기타
레지스트리 공개i
2026년 8월 12일
코드 마지막 변경i
2026년 11월 16일
제작자
cedricziel
패키지
oci: ghcr.io/cedricziel/truenas-mcp:0.4.2
웹사이트
github.com
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 cedricziel 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 3일 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

확인 안 함: 버전이 있는 npm과 PyPI 패키지만 확인할 수 있습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/cedricziel-truenas-mcp.svg)](https://mcp.popnx.com/en/servers/cedricziel-truenas-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 20653개 중 91%보다 스타가 많아요
  • 이 카테고리의 다른 서버 20653개 중 17%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 20653개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

TrueNAS SCALE, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 3일 전 변경됐고, 최신 버전(0.4.2)은 3개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

제작자: koala73널리 사용됨★ 9.1만3일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

제작자: openstatusHQ널리 사용됨★ 9.3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

제작자: Klavis-AI성장 중★ 5.8천14개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

제작자: jitsucom널리 사용됨★ 5.1천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · jitsu.com
비슷한 항목과 비교
이 항목
TrueNAS SCALE
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/44/44/41/44/4
라이선스MITAGPL-3.0AGPL-3.0MITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

truenas-mcp

An MCP server for TrueNAS SCALE. Read-first, deployable as a TrueNAS app, and authenticated with each user's own API key.

Status: working, young. Every capability in the design is implemented and

verified against a live TrueNAS 26 box. Expect rough edges rather than gaps.

Why this exists

iX ship an official truenas/truenas-mcp, and if it fits your needs you should use it. This one exists for three things it does not do:

  • It only speaks stdio, so it cannot be deployed as a container on the NAS and reached from elsewhere.
  • It holds a single server-wide API key, so every caller gets identical reach no matter how they authenticate.
  • Its app coverage is catalog-shaped — install, uninstall, browse — with no way to pull new images and redeploy an app you already run.

Design

Three ideas do most of the work.

The credential is the authorization. Callers supply their own TrueNAS API key; this server stores none. A session reaches exactly what that user's key permits, revocation happens in the TrueNAS UI, and there is no shared secret to leak. Authentication and authorization stop being two systems that can disagree. Served over stdio the key arrives from the environment instead, because there is no request to carry it — but the client spawns one process per user, so it is still that user's own key. What the design rules out is one key standing in for many callers, not configuration as such.

Reads and writes get different tool shapes. Reads are grouped into concern-level tools with an op enum, because they share most of their arguments and 815 middleware methods cannot each become a tool. Writes are individual tools — MCP annotations are per-tool, so bundling a safe operation with a destructive one behind one op parameter would put both behind a single consent gate, and a user who tires of confirming list_pools will allowlist the tool that can also export a pool.

Read-only by default. Mutating tools appear only when explicitly enabled. Separately, a denylist of unrecoverable operations is not reachable under any configuration, and it constrains argument values rather than just method names — deleting an app is recoverable, deleting it along with its volumes is not, and those are the same method.

Each of these was measured against a live box rather than reasoned about in the abstract, and several were overturned by what that measurement found.

Requirements

  • TrueNAS SCALE 25.04 or later. The REST API is removed in TrueNAS 26; this server speaks only the versioned JSON-RPC 2.0 WebSocket API.
  • A TrueNAS API key per user. Create them under Credentials → API Keys.

Deploying as a TrueNAS app

Copy deploy/truenas-custom-app.yaml, adjust TRUENAS_MCP_TARGET, and paste it into Apps → Discover → Install via YAML.

It mounts no host socket and requests no privileged access. The server reaches the middleware over the network even when running on the same box, so that every connection carries a user identity rather than root-equivalent socket access.

Running it elsewhere

Nothing requires the server to run on the machine it manages, and there is a good reason not to: installed as a TrueNAS app, it is unavailable exactly when the box is unhealthy — which is when you most want to ask it what is wrong.

docker run -p 8080:8080 \

-e TRUENAS_MCP_TARGET=nas.local \ -e TRUENAS_MCP_TLS_CERT=/tls/cert.pem \ -e TRUENAS_MCP_TLS_KEY=/tls/key.pem \ ghcr.io/cedricziel/truenas-mcp:main

Running the binary

Each GitHub release attaches binaries for Linux, macOS, and Windows on amd64 and arm64, alongside a checksums.txt. Configuration is environment variables only — there is no config file, and the only flags are --stdio and --healthcheck.

By default the binary is an HTTP server. Running it does not make a client pick it up on its own; it listens on a port, and the client connects to it by URL. For clients that spawn the server themselves, see Serving over stdio below.

TRUENAS_MCP_TARGET=nas.local \

TRUENAS_MCP_LISTEN=127.0.0.1:8080 \ TRUENAS_MCP_TARGET_INSECURE=true \ TRUENAS_MCP_ALLOW_PLAINTEXT=true \ ./truenas-mcp

Point the client at http://localhost:8080/mcp, with the TrueNAS API key sent as an Authorization: Bearer header, the same as in Connecting a client.

TRUENAS_MCP_TARGET_INSECURE is typically needed for the reason given in On the two TLS settings: TrueNAS ships a self-signed certificate for CN=localhost that will not validate against any other address. TRUENAS_MCP_ALLOW_PLAINTEXT is defensible here specifically because TRUENAS_MCP_LISTEN binds the listener to loopback — reachable only from the same machine — which is the condition that section argues plaintext requires. The default bind address is :8080, which is every interface, so dropping that setting while keeping plaintext would put API keys on the wire.

Serving over stdio

Some clients spawn a server as a subprocess and talk to it over its standard input and output rather than connecting to a URL. --stdio serves the same tools that way.

claude mcp add --scope user truenas \

--env TRUENAS_MCP_TARGET=nas.local \ --env TRUENAS_MCP_TARGET_INSECURE=true \ --env TRUENAS_MCP_API_KEY=$YOUR_TRUENAS_API_KEY \ -- /path/to/truenas-mcp --stdio

There is no request to carry a header here, so the key comes from TRUENAS_MCP_API_KEY instead. That is not the shared secret the HTTP transport avoids: the client spawns one process per user, so the key it passes is that user's own, and the process reaches exactly what that key permits. The same variable is refused in HTTP mode, where one process serves many callers and a configured key would be shared by all of them.

Nothing about the listener applies. TRUENAS_MCP_LISTEN, the two TLS settings and TRUENAS_MCP_ALLOW_PLAINTEXT are ignored with a warning rather than an error, since none of them weakens anything when no listener exists. --healthcheck is refused alongside --stdio, because it probes a listener that was never started.

Settings that concern the target rather than the listener still apply, including TRUENAS_MCP_TARGET_INSECURE and TRUENAS_MCP_ENABLE_WRITES.

Configuration

All configuration is environment variables; no config file or persistent volume is needed. Invalid configuration refuses to start rather than running degraded.

VariableDefaultMeaning
TRUENAS_MCP_TARGET_required_TrueNAS host, optionally host:port
TRUENAS_MCP_LISTEN:8080Bind address
TRUENAS_MCP_TLS_CERT / TRUENAS_MCP_TLS_KEY—Serve MCP over TLS
TRUENAS_MCP_ALLOW_PLAINTEXTfalseServe without TLS (see below)
TRUENAS_MCP_TARGET_INSECUREfalseAccept the target's certificate unverified
TRUENAS_MCP_TARGET_ALLOW_PLAINTEXTfalseConnect to the target without TLS
TRUENAS_MCP_ENABLE_WRITESfalseExpose mutating tools
TRUENAS_MCP_API_KEY—Credential for --stdio; refused otherwise
TRUENAS_MCP_OAUTH_ISSUER—Enables OAuth; the server's own externally-reachable base URL
TRUENAS_MCP_OAUTH_ENCRYPTION_KEY_generated_64 hex characters (32 bytes); see below
TRUENAS_MCP_OAUTH_ACCESS_TOKEN_TTL1hHow long an issued OAuth access token is valid
TRUENAS_MCP_OAUTH_REFRESH_TOKEN_TTL720h (30 days)How long a refresh token is valid; 0 disables refresh tokens

No credential is configurable for the HTTP transport. Callers supply their own with each request, and setting TRUENAS_MCP_API_KEY without --stdio is a startup error rather than a silent fallback. Over stdio there is no request to carry one and the process serves a single user, so the variable is how that user's key arrives — see Serving over stdio.

On the two TLS settings

Transport scheme and certificate verification are deliberately separate.

TrueNAS ships a self-signed certificate issued for CN=localhost with only DNS:localhost as a SAN, so no address you can reach it by will validate. The fix is TRUENAS_MCP_TARGET_INSECURE=true, which keeps the connection encrypted and merely unauthenticated. If certificate problems forced you onto plaintext instead, TrueNAS would see your API key in the clear — and revoke it.

TRUENAS_MCP_ALLOW_PLAINTEXT is about the boundary callers cross, which carries their API keys. It is correct when a reverse proxy terminates TLS in front of the server, and wrong when the plaintext listener is reachable directly.

Connecting a client

claude mcp add --scope user --transport http truenas \

https://your-host/mcp \ --header "Authorization: Bearer $YOUR_TRUENAS_API_KEY"

The key may also be sent as X-TrueNAS-API-Key, for clients that cannot set an Authorization header. Requests without either are refused with 401.

Clients that spawn the server rather than connect to one want Serving over stdio instead.

Connecting an OAuth client (Claude.ai and similar)

A hosted MCP client such as Claude.ai never holds a TrueNAS API key directly — it only speaks OAuth 2.1: discovery, Dynamic Client Registration (RFC 7591), and an authorization-code flow with PKCE. Set an issuer URL to turn that on:

docker run -p 8080:8080 \

-e TRUENAS_MCP_TARGET=nas.local \ -e TRUENAS_MCP_TLS_CERT=/tls/cert.pem \ -e TRUENAS_MCP_TLS_KEY=/tls/key.pem \ -e TRUENAS_MCP_OAUTH_ISSUER=https://your-host \ -e TRUENAS_MCP_OAUTH_ENCRYPTION_KEY=$(openssl rand -hex 32) \ ghcr.io/cedricziel/truenas-mcp:main

TRUENAS_MCP_OAUTH_ISSUER must be the exact base URL the server is reachable at from the client's side (no trailing slash). TRUENAS_MCP_OAUTH_ENCRYPTION_KEY seals every client registration, authorization code, and token this process issues; leaving it unset works, but a fresh key is generated on every restart and invalidates every outstanding one — set it explicitly for anything longer than a quick trial. Neither TrueNAS credentials nor a client/token database are stored anywhere: everything OAuth issues is self-contained, verified with this one key. See openspec/changes/oauth-dcr-authorization/design.md for why.

Point a client at https://your-host/mcp the same way you would for the raw API key above; it discovers everything else — the authorization server, where to register, where to send the resource owner — from /.well-known/oauth-protected-resource. The first connection opens a browser consent screen asking for a TrueNAS username (optional, shown only to you) and API key; nothing is granted to the client until that's submitted and the target accepts it.

TRUENAS_MCP_ALLOW_PLAINTEXT works the same way it does for the raw-API-key path: it is meant for a reverse proxy that terminates TLS at the edge and forwards plaintext to this process, not for exposing the consent screen over the open internet unencrypt

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요