프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Office Outlook MCP

제작자: chrischall버전 0.13.0i★ 1i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.chrischall/office-outlook-mcp

설치 방법

What it does

Outlook / Microsoft 365 for Claude — triage mail, reply, answer invites and book meetings, confirmed

  • Connects 내 컴퓨터에서 실행
  • Account or key Needs OUTLOOK_ACCESS_TOKEN, MCP_CONFIRM_SECRET
  • Category 채팅 및 이메일

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기25/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수37/100

품질: 기본 점검 2/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 88 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Office Outlook MCP 설치해 줘. https://mcp.popnx.com/i/chrischall-office-outlook-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 2/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

Office Outlook MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server Office Outlook MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "office-outlook": { "command": "npx", "args": [ "-y", "@chrischall/office-outlook-mcp" ], "env": { "OUTLOOK_ACCESS_TOKEN": "your-value", "MCP_CONFIRM_SECRET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) OUTLOOK_ACCESS_TOKEN, MCP_CONFIRM_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Office Outlook MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Office Outlook MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  4. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "office-outlook": {
          "command": "npx",
          "args": [
            "-y",
            "@chrischall/office-outlook-mcp"
          ],
          "env": {
            "OUTLOOK_ACCESS_TOKEN": "your-value",
            "MCP_CONFIRM_SECRET": "your-value"
          }
        }
      }
    }

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude를 끄고 다시 열기

  6. 해 보기

    Office Outlook MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Office Outlook MCP을 쓰고 있다고 하거나 답에 Office Outlook MCP 도구 이름이 나오면 연결된 거예요

추가 설정 14개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • OUTLOOK_DISABLE_FETCHPROXY '1'로 설정하면 브라우저 캡처가 비활성화되며, OUTLOOK_ACCESS_TOKEN이 필요합니다
    영어 원문 보기Set to '1' to disable browser capture, requiring OUTLOOK_ACCESS_TOKEN.
  • OUTLOOK_API_BASE Outlook REST 기본 URL 재정의. 기본값은 https://outlook.office.com/api/v2.0.
    영어 원문 보기Override the Outlook REST base URL. Defaults to https://outlook.office.com/api/v2.0.
  • OUTLOOK_WS_PORT 토큰 캡처에 사용되는 fetchproxy concentrator 포트. 기본값은 37149이며, 플릿 전체에서 공유되는 포트입니다.
    영어 원문 보기fetchproxy concentrator port used for token capture. Defaults to 37149, the fleet-wide shared port.
  • OUTLOOK_WEB_HOST 로그인된 탭이 사용하는 Outlook Web 호스트: outlook.cloud.microsoft(기본값) 또는 기존 앱을 사용하는 테넌트의 경우 outlook.office.com. 이 호스트 하나만 브라우저 브리지에 선언됩니다.
    영어 원문 보기Which Outlook Web host your signed-in tab is on: outlook.cloud.microsoft (default) or outlook.office.com for a tenant still on the legacy app. Only this one host is declared to the browser bridge.
  • OUTLOOK_CAPTURE_TIMEOUT Outlook 탭이 토큰을 읽을 수 있는 요청을 보낼 때까지 기다리는 시간(초). 기본값은 30.
    영어 원문 보기Seconds to wait for the Outlook tab to make a request we can read a token from. Defaults to 30.
  • OUTLOOK_TOKEN_CACHE 'false'로 설정하면 실행 간에 캡처된 토큰을 캐시하지 않습니다. 기본값은 true입니다.
    영어 원문 보기Set to 'false' to stop caching the captured token between runs. Defaults to true.
  • OUTLOOK_TOKEN_FILE 캐시된 토큰 파일의 경로입니다. 기본값은 /.office-outlook-mcp/token.json입니다.
    영어 원문 보기Path to the cached token file. Defaults to ~/.office-outlook-mcp/token.json.
  • OUTLOOK_OUTPUT_DIR Absolute directory where outlook_export_messages and outlook_export_events write their files. Defaults to ~/Downloads/office-outlook-mcp. When set, a per-call dest must be inside it.
  • FETCHPROXY_WS_HOST Bind interface for the fetchproxy concentrator, a literal IP only (default 127.0.0.1). Keep on loopback; it exists for hosted deployments that run each MCP in its own network namespace.
  • FETCHPROXY_IDENTITY_DIR fetchproxy 장기 ID 키 쌍이 저장되는 절대 경로(기본값 /.fetchproxy/identity/)
    영어 원문 보기Absolute path where the fetchproxy long-term identity keypair is stored (default ~/.fetchproxy/identity/).
  • MCP_CONFIRM_MODE What outlook_send_message, outlook_reply, outlook_respond_to_invite and the other write tools do on a client that cannot show a confirmation prompt (claude.ai, Claude Desktop): "ask-user" (default: t…
  • MCP_CONFIRM_ELICITATION "off"는 확인 프롬프트를 전혀 표시하지 않으므로 모든 클라이언트가 MCP_CONFIRM_MODE 흐름을 따릅니다. 프롬프트를 표시할 수 있다고 하지만 실제로는 표시하지 않는 클라이언트에 설정합니다. 기본값은 on입니다
    영어 원문 보기"off" never shows a confirmation prompt, so every client gets the MCP_CONFIRM_MODE flow. Set it for a client that says it can show prompts but never does. Defaults to on.
  • MCP_CONFIRM_TTL_SECONDS confirmToken이 유효한 기간(초). 기본값은 600입니다.
    영어 원문 보기How long a confirmToken stays valid, in seconds. Defaults to 600.
  • OUTLOOK_COPILOT_MSAL_CACHE opencode-m365 login이 기록하고 outlook_ask_copilot이 읽는 MSAL 토큰 캐시의 경로. 기본값은 /.config/opencode-copilot/msal-cache.json입니다.
    영어 원문 보기Path to the MSAL token cache written by `opencode-m365 login`, read by outlook_ask_copilot. Defaults to ~/.config/opencode-copilot/msal-cache.json.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Office Outlook MCP에 연결할 수 없어요

Office Outlook MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Office Outlook MCP에 연결되는 앱 쓰기

  • Office Outlook MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • Office Outlook MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • Office Outlook MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • Office Outlook MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

B · 채팅 및 이메일에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

Office Outlook MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Office Outlook MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user office-outlook --env OUTLOOK_ACCESS_TOKEN=your-value --env MCP_CONFIRM_SECRET=your-value -- npx -y @chrischall/office-outlook-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) OUTLOOK_ACCESS_TOKEN, MCP_CONFIRM_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Office Outlook MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Office Outlook MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  4. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user office-outlook --env OUTLOOK_ACCESS_TOKEN=your-value --env MCP_CONFIRM_SECRET=your-value -- npx -y @chrischall/office-outlook-mcp

    Enter 전에 “your-value”를 내 키로 바꾸세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude Code에서 /mcp 입력

    Office Outlook MCP이 목록에 있고 연결됨으로 보이면 돼요

  6. 해 보기

    Office Outlook MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Office Outlook MCP을 쓰고 있다고 하거나 답에 Office Outlook MCP 도구 이름이 나오면 연결된 거예요

추가 설정 14개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • OUTLOOK_DISABLE_FETCHPROXY '1'로 설정하면 브라우저 캡처가 비활성화되며, OUTLOOK_ACCESS_TOKEN이 필요합니다
    영어 원문 보기Set to '1' to disable browser capture, requiring OUTLOOK_ACCESS_TOKEN.
  • OUTLOOK_API_BASE Outlook REST 기본 URL 재정의. 기본값은 https://outlook.office.com/api/v2.0.
    영어 원문 보기Override the Outlook REST base URL. Defaults to https://outlook.office.com/api/v2.0.
  • OUTLOOK_WS_PORT 토큰 캡처에 사용되는 fetchproxy concentrator 포트. 기본값은 37149이며, 플릿 전체에서 공유되는 포트입니다.
    영어 원문 보기fetchproxy concentrator port used for token capture. Defaults to 37149, the fleet-wide shared port.
  • OUTLOOK_WEB_HOST 로그인된 탭이 사용하는 Outlook Web 호스트: outlook.cloud.microsoft(기본값) 또는 기존 앱을 사용하는 테넌트의 경우 outlook.office.com. 이 호스트 하나만 브라우저 브리지에 선언됩니다.
    영어 원문 보기Which Outlook Web host your signed-in tab is on: outlook.cloud.microsoft (default) or outlook.office.com for a tenant still on the legacy app. Only this one host is declared to the browser bridge.
  • OUTLOOK_CAPTURE_TIMEOUT Outlook 탭이 토큰을 읽을 수 있는 요청을 보낼 때까지 기다리는 시간(초). 기본값은 30.
    영어 원문 보기Seconds to wait for the Outlook tab to make a request we can read a token from. Defaults to 30.
  • OUTLOOK_TOKEN_CACHE 'false'로 설정하면 실행 간에 캡처된 토큰을 캐시하지 않습니다. 기본값은 true입니다.
    영어 원문 보기Set to 'false' to stop caching the captured token between runs. Defaults to true.
  • OUTLOOK_TOKEN_FILE 캐시된 토큰 파일의 경로입니다. 기본값은 /.office-outlook-mcp/token.json입니다.
    영어 원문 보기Path to the cached token file. Defaults to ~/.office-outlook-mcp/token.json.
  • OUTLOOK_OUTPUT_DIR Absolute directory where outlook_export_messages and outlook_export_events write their files. Defaults to ~/Downloads/office-outlook-mcp. When set, a per-call dest must be inside it.
  • FETCHPROXY_WS_HOST Bind interface for the fetchproxy concentrator, a literal IP only (default 127.0.0.1). Keep on loopback; it exists for hosted deployments that run each MCP in its own network namespace.
  • FETCHPROXY_IDENTITY_DIR fetchproxy 장기 ID 키 쌍이 저장되는 절대 경로(기본값 /.fetchproxy/identity/)
    영어 원문 보기Absolute path where the fetchproxy long-term identity keypair is stored (default ~/.fetchproxy/identity/).
  • MCP_CONFIRM_MODE What outlook_send_message, outlook_reply, outlook_respond_to_invite and the other write tools do on a client that cannot show a confirmation prompt (claude.ai, Claude Desktop): "ask-user" (default: t…
  • MCP_CONFIRM_ELICITATION "off"는 확인 프롬프트를 전혀 표시하지 않으므로 모든 클라이언트가 MCP_CONFIRM_MODE 흐름을 따릅니다. 프롬프트를 표시할 수 있다고 하지만 실제로는 표시하지 않는 클라이언트에 설정합니다. 기본값은 on입니다
    영어 원문 보기"off" never shows a confirmation prompt, so every client gets the MCP_CONFIRM_MODE flow. Set it for a client that says it can show prompts but never does. Defaults to on.
  • MCP_CONFIRM_TTL_SECONDS confirmToken이 유효한 기간(초). 기본값은 600입니다.
    영어 원문 보기How long a confirmToken stays valid, in seconds. Defaults to 600.
  • OUTLOOK_COPILOT_MSAL_CACHE opencode-m365 login이 기록하고 outlook_ask_copilot이 읽는 MSAL 토큰 캐시의 경로. 기본값은 /.config/opencode-copilot/msal-cache.json입니다.
    영어 원문 보기Path to the MSAL token cache written by `opencode-m365 login`, read by outlook_ask_copilot. Defaults to ~/.config/opencode-copilot/msal-cache.json.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

Office Outlook MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Office Outlook MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "office-outlook": { "command": "npx", "args": [ "-y", "@chrischall/office-outlook-mcp" ], "env": { "OUTLOOK_ACCESS_TOKEN": "your-value", "MCP_CONFIRM_SECRET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) OUTLOOK_ACCESS_TOKEN, MCP_CONFIRM_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Office Outlook MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Office Outlook MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    Office Outlook MCP 설정에서 OUTLOOK_ACCESS_TOKEN, MCP_CONFIRM_SECRET가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Cursor에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    Office Outlook MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Office Outlook MCP을 쓰고 있다고 하거나 답에 Office Outlook MCP 도구 이름이 나오면 연결된 거예요

추가 설정 14개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • OUTLOOK_DISABLE_FETCHPROXY '1'로 설정하면 브라우저 캡처가 비활성화되며, OUTLOOK_ACCESS_TOKEN이 필요합니다
    영어 원문 보기Set to '1' to disable browser capture, requiring OUTLOOK_ACCESS_TOKEN.
  • OUTLOOK_API_BASE Outlook REST 기본 URL 재정의. 기본값은 https://outlook.office.com/api/v2.0.
    영어 원문 보기Override the Outlook REST base URL. Defaults to https://outlook.office.com/api/v2.0.
  • OUTLOOK_WS_PORT 토큰 캡처에 사용되는 fetchproxy concentrator 포트. 기본값은 37149이며, 플릿 전체에서 공유되는 포트입니다.
    영어 원문 보기fetchproxy concentrator port used for token capture. Defaults to 37149, the fleet-wide shared port.
  • OUTLOOK_WEB_HOST 로그인된 탭이 사용하는 Outlook Web 호스트: outlook.cloud.microsoft(기본값) 또는 기존 앱을 사용하는 테넌트의 경우 outlook.office.com. 이 호스트 하나만 브라우저 브리지에 선언됩니다.
    영어 원문 보기Which Outlook Web host your signed-in tab is on: outlook.cloud.microsoft (default) or outlook.office.com for a tenant still on the legacy app. Only this one host is declared to the browser bridge.
  • OUTLOOK_CAPTURE_TIMEOUT Outlook 탭이 토큰을 읽을 수 있는 요청을 보낼 때까지 기다리는 시간(초). 기본값은 30.
    영어 원문 보기Seconds to wait for the Outlook tab to make a request we can read a token from. Defaults to 30.
  • OUTLOOK_TOKEN_CACHE 'false'로 설정하면 실행 간에 캡처된 토큰을 캐시하지 않습니다. 기본값은 true입니다.
    영어 원문 보기Set to 'false' to stop caching the captured token between runs. Defaults to true.
  • OUTLOOK_TOKEN_FILE 캐시된 토큰 파일의 경로입니다. 기본값은 /.office-outlook-mcp/token.json입니다.
    영어 원문 보기Path to the cached token file. Defaults to ~/.office-outlook-mcp/token.json.
  • OUTLOOK_OUTPUT_DIR Absolute directory where outlook_export_messages and outlook_export_events write their files. Defaults to ~/Downloads/office-outlook-mcp. When set, a per-call dest must be inside it.
  • FETCHPROXY_WS_HOST Bind interface for the fetchproxy concentrator, a literal IP only (default 127.0.0.1). Keep on loopback; it exists for hosted deployments that run each MCP in its own network namespace.
  • FETCHPROXY_IDENTITY_DIR fetchproxy 장기 ID 키 쌍이 저장되는 절대 경로(기본값 /.fetchproxy/identity/)
    영어 원문 보기Absolute path where the fetchproxy long-term identity keypair is stored (default ~/.fetchproxy/identity/).
  • MCP_CONFIRM_MODE What outlook_send_message, outlook_reply, outlook_respond_to_invite and the other write tools do on a client that cannot show a confirmation prompt (claude.ai, Claude Desktop): "ask-user" (default: t…
  • MCP_CONFIRM_ELICITATION "off"는 확인 프롬프트를 전혀 표시하지 않으므로 모든 클라이언트가 MCP_CONFIRM_MODE 흐름을 따릅니다. 프롬프트를 표시할 수 있다고 하지만 실제로는 표시하지 않는 클라이언트에 설정합니다. 기본값은 on입니다
    영어 원문 보기"off" never shows a confirmation prompt, so every client gets the MCP_CONFIRM_MODE flow. Set it for a client that says it can show prompts but never does. Defaults to on.
  • MCP_CONFIRM_TTL_SECONDS confirmToken이 유효한 기간(초). 기본값은 600입니다.
    영어 원문 보기How long a confirmToken stays valid, in seconds. Defaults to 600.
  • OUTLOOK_COPILOT_MSAL_CACHE opencode-m365 login이 기록하고 outlook_ask_copilot이 읽는 MSAL 토큰 캐시의 경로. 기본값은 /.config/opencode-copilot/msal-cache.json입니다.
    영어 원문 보기Path to the MSAL token cache written by `opencode-m365 login`, read by outlook_ask_copilot. Defaults to ~/.config/opencode-copilot/msal-cache.json.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

Office Outlook MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Office Outlook MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "office-outlook": { "type": "stdio", "command": "npx", "args": [ "-y", "@chrischall/office-outlook-mcp" ], "env": { "OUTLOOK_ACCESS_TOKEN": "your-value", "MCP_CONFIRM_SECRET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) OUTLOOK_ACCESS_TOKEN, MCP_CONFIRM_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Office Outlook MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Office Outlook MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    Office Outlook MCP 설정에서 OUTLOOK_ACCESS_TOKEN, MCP_CONFIRM_SECRET가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. VS Code에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    Office Outlook MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Office Outlook MCP을 쓰고 있다고 하거나 답에 Office Outlook MCP 도구 이름이 나오면 연결된 거예요

추가 설정 14개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • OUTLOOK_DISABLE_FETCHPROXY '1'로 설정하면 브라우저 캡처가 비활성화되며, OUTLOOK_ACCESS_TOKEN이 필요합니다
    영어 원문 보기Set to '1' to disable browser capture, requiring OUTLOOK_ACCESS_TOKEN.
  • OUTLOOK_API_BASE Outlook REST 기본 URL 재정의. 기본값은 https://outlook.office.com/api/v2.0.
    영어 원문 보기Override the Outlook REST base URL. Defaults to https://outlook.office.com/api/v2.0.
  • OUTLOOK_WS_PORT 토큰 캡처에 사용되는 fetchproxy concentrator 포트. 기본값은 37149이며, 플릿 전체에서 공유되는 포트입니다.
    영어 원문 보기fetchproxy concentrator port used for token capture. Defaults to 37149, the fleet-wide shared port.
  • OUTLOOK_WEB_HOST 로그인된 탭이 사용하는 Outlook Web 호스트: outlook.cloud.microsoft(기본값) 또는 기존 앱을 사용하는 테넌트의 경우 outlook.office.com. 이 호스트 하나만 브라우저 브리지에 선언됩니다.
    영어 원문 보기Which Outlook Web host your signed-in tab is on: outlook.cloud.microsoft (default) or outlook.office.com for a tenant still on the legacy app. Only this one host is declared to the browser bridge.
  • OUTLOOK_CAPTURE_TIMEOUT Outlook 탭이 토큰을 읽을 수 있는 요청을 보낼 때까지 기다리는 시간(초). 기본값은 30.
    영어 원문 보기Seconds to wait for the Outlook tab to make a request we can read a token from. Defaults to 30.
  • OUTLOOK_TOKEN_CACHE 'false'로 설정하면 실행 간에 캡처된 토큰을 캐시하지 않습니다. 기본값은 true입니다.
    영어 원문 보기Set to 'false' to stop caching the captured token between runs. Defaults to true.
  • OUTLOOK_TOKEN_FILE 캐시된 토큰 파일의 경로입니다. 기본값은 /.office-outlook-mcp/token.json입니다.
    영어 원문 보기Path to the cached token file. Defaults to ~/.office-outlook-mcp/token.json.
  • OUTLOOK_OUTPUT_DIR Absolute directory where outlook_export_messages and outlook_export_events write their files. Defaults to ~/Downloads/office-outlook-mcp. When set, a per-call dest must be inside it.
  • FETCHPROXY_WS_HOST Bind interface for the fetchproxy concentrator, a literal IP only (default 127.0.0.1). Keep on loopback; it exists for hosted deployments that run each MCP in its own network namespace.
  • FETCHPROXY_IDENTITY_DIR fetchproxy 장기 ID 키 쌍이 저장되는 절대 경로(기본값 /.fetchproxy/identity/)
    영어 원문 보기Absolute path where the fetchproxy long-term identity keypair is stored (default ~/.fetchproxy/identity/).
  • MCP_CONFIRM_MODE What outlook_send_message, outlook_reply, outlook_respond_to_invite and the other write tools do on a client that cannot show a confirmation prompt (claude.ai, Claude Desktop): "ask-user" (default: t…
  • MCP_CONFIRM_ELICITATION "off"는 확인 프롬프트를 전혀 표시하지 않으므로 모든 클라이언트가 MCP_CONFIRM_MODE 흐름을 따릅니다. 프롬프트를 표시할 수 있다고 하지만 실제로는 표시하지 않는 클라이언트에 설정합니다. 기본값은 on입니다
    영어 원문 보기"off" never shows a confirmation prompt, so every client gets the MCP_CONFIRM_MODE flow. Set it for a client that says it can show prompts but never does. Defaults to on.
  • MCP_CONFIRM_TTL_SECONDS confirmToken이 유효한 기간(초). 기본값은 600입니다.
    영어 원문 보기How long a confirmToken stays valid, in seconds. Defaults to 600.
  • OUTLOOK_COPILOT_MSAL_CACHE opencode-m365 login이 기록하고 outlook_ask_copilot이 읽는 MSAL 토큰 캐시의 경로. 기본값은 /.config/opencode-copilot/msal-cache.json입니다.
    영어 원문 보기Path to the MSAL token cache written by `opencode-m365 login`, read by outlook_ask_copilot. Defaults to ~/.config/opencode-copilot/msal-cache.json.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Office Outlook MCP을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user office-outlook --env OUTLOOK_ACCESS_TOKEN=your-value --env MCP_CONFIRM_SECRET=your-value -- npx -y @chrischall/office-outlook-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "office-outlook": {
      "command": "npx",
      "args": [
        "-y",
        "@chrischall/office-outlook-mcp"
      ],
      "env": {
        "OUTLOOK_ACCESS_TOKEN": "your-value",
        "MCP_CONFIRM_SECRET": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "office-outlook": {
      "command": "npx",
      "args": [
        "-y",
        "@chrischall/office-outlook-mcp"
      ],
      "env": {
        "OUTLOOK_ACCESS_TOKEN": "your-value",
        "MCP_CONFIRM_SECRET": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "office-outlook": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@chrischall/office-outlook-mcp"
      ],
      "env": {
        "OUTLOOK_ACCESS_TOKEN": "your-value",
        "MCP_CONFIRM_SECRET": "your-value"
      }
    }
  }
}

직접 입력할 값

  • OUTLOOK_ACCESS_TOKEN 비밀 필수 env
    미리 발급받은 Outlook bearer 토큰. 브라우저 브리지보다 우선합니다. 고급 사용자 및 CI 전용이며, 토큰은 약 25시간 동안 유효합니다.
    영어 원문 보기Pre-obtained Outlook bearer token. Overrides the browser bridge. Power users / CI only; tokens last about 25 hours.
  • OUTLOOK_DISABLE_FETCHPROXY env
    '1'로 설정하면 브라우저 캡처가 비활성화되며, OUTLOOK_ACCESS_TOKEN이 필요합니다
    영어 원문 보기Set to '1' to disable browser capture, requiring OUTLOOK_ACCESS_TOKEN.
  • OUTLOOK_API_BASE env
    Outlook REST 기본 URL 재정의. 기본값은 https://outlook.office.com/api/v2.0.
    영어 원문 보기Override the Outlook REST base URL. Defaults to https://outlook.office.com/api/v2.0.
  • OUTLOOK_WS_PORT env
    토큰 캡처에 사용되는 fetchproxy concentrator 포트. 기본값은 37149이며, 플릿 전체에서 공유되는 포트입니다.
    영어 원문 보기fetchproxy concentrator port used for token capture. Defaults to 37149, the fleet-wide shared port.
  • OUTLOOK_WEB_HOST env
    로그인된 탭이 사용하는 Outlook Web 호스트: outlook.cloud.microsoft(기본값) 또는 기존 앱을 사용하는 테넌트의 경우 outlook.office.com. 이 호스트 하나만 브라우저 브리지에 선언됩니다.
    영어 원문 보기Which Outlook Web host your signed-in tab is on: outlook.cloud.microsoft (default) or outlook.office.com for a tenant still on the legacy app. Only this one host is declared to the browser bridge.
  • OUTLOOK_CAPTURE_TIMEOUT env
    Outlook 탭이 토큰을 읽을 수 있는 요청을 보낼 때까지 기다리는 시간(초). 기본값은 30.
    영어 원문 보기Seconds to wait for the Outlook tab to make a request we can read a token from. Defaults to 30.
  • OUTLOOK_TOKEN_CACHE 비밀 env
    'false'로 설정하면 실행 간에 캡처된 토큰을 캐시하지 않습니다. 기본값은 true입니다.
    영어 원문 보기Set to 'false' to stop caching the captured token between runs. Defaults to true.
  • OUTLOOK_TOKEN_FILE env
    캐시된 토큰 파일의 경로입니다. 기본값은 /.office-outlook-mcp/token.json입니다.
    영어 원문 보기Path to the cached token file. Defaults to ~/.office-outlook-mcp/token.json.
  • OUTLOOK_OUTPUT_DIR env
    Absolute directory where outlook_export_messages and outlook_export_events write their files. Defaults to ~/Downloads/office-outlook-mcp. When set, a per-call dest must be inside it.
  • FETCHPROXY_WS_HOST env
    Bind interface for the fetchproxy concentrator, a literal IP only (default 127.0.0.1). Keep on loopback; it exists for hosted deployments that run each MCP in its own network namespace.
  • FETCHPROXY_IDENTITY_DIR env
    fetchproxy 장기 ID 키 쌍이 저장되는 절대 경로(기본값 /.fetchproxy/identity/)
    영어 원문 보기Absolute path where the fetchproxy long-term identity keypair is stored (default ~/.fetchproxy/identity/).
  • MCP_CONFIRM_MODE env
    What outlook_send_message, outlook_reply, outlook_respond_to_invite and the other write tools do on a client that cannot show a confirmation prompt (claude.ai, Claude Desktop): "ask-user" (default: t…
  • MCP_CONFIRM_ELICITATION env
    "off"는 확인 프롬프트를 전혀 표시하지 않으므로 모든 클라이언트가 MCP_CONFIRM_MODE 흐름을 따릅니다. 프롬프트를 표시할 수 있다고 하지만 실제로는 표시하지 않는 클라이언트에 설정합니다. 기본값은 on입니다
    영어 원문 보기"off" never shows a confirmation prompt, so every client gets the MCP_CONFIRM_MODE flow. Set it for a client that says it can show prompts but never does. Defaults to on.
  • MCP_CONFIRM_TTL_SECONDS env
    confirmToken이 유효한 기간(초). 기본값은 600입니다.
    영어 원문 보기How long a confirmToken stays valid, in seconds. Defaults to 600.
  • MCP_CONFIRM_SECRET 비밀 필수 env
    confirmTokens에 서명하는 키입니다. 기본값은 프로세스마다 무작위로 생성됩니다. 서버 재시작 후에도 토큰이 유효해야 할 때만 설정하세요.
    영어 원문 보기Signing key for confirmTokens. Random per process by default; set it only if tokens must survive a server restart.
  • OUTLOOK_COPILOT_MSAL_CACHE env
    opencode-m365 login이 기록하고 outlook_ask_copilot이 읽는 MSAL 토큰 캐시의 경로. 기본값은 /.config/opencode-copilot/msal-cache.json입니다.
    영어 원문 보기Path to the MSAL token cache written by `opencode-m365 login`, read by outlook_ask_copilot. Defaults to ~/.config/opencode-copilot/msal-cache.json.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
1,178/주
라이선스i
라이선스 표시 없음
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.13.0
레지스트리 공개i
2026년 11월 12일
코드 마지막 변경i
2026년 11월 12일
제작자
chrischall
패키지
npm: @chrischall/office-outlook-mcp
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 chrischall 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 7일 전

  • ✕ 실패

    라이선스 있음

    저장소에서 라이선스 파일을 찾지 못했어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 @chrischall/office-outlook-mcp@0.13.0 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/chrischall-office-outlook-mcp.svg)](https://mcp.popnx.com/en/servers/chrischall-office-outlook-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

채팅 및 이메일 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 2009개 중 83%보다 스타가 많아요
  • 이 카테고리의 다른 서버 2009개 중 82%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 2009개 중 50%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Office Outlook MCP, 안전한가요?

해당하는 기본 점검 3개 중 2개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: OUTLOOK_ACCESS_TOKEN, MCP_CONFIRM_SECRET

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 7일 전 변경됐고, 최신 버전(0.13.0)은 7일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: emailmd, Kite Discord Bot Builder, e2a — email for AI agents, Infobip MCP, kernelCAD

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

emailmd

Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.

제작자: anypost널리 사용됨↓ 5.4천/주★ 1.4천5일 전 업데이트

컴퓨터 또는 클라우드✓ 서비스 회사 · emailmd.dev

Infobip MCP

Infobip MCP server for omnichannel communication and messaging. SMS, RCS, WhatsApp, Viber and more.

제작자: infobip초기★ 3613개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · infobip.com

kernelCAD

CAD in ChatGPT and Claude: editable parts, STEP/STL/drawings, in-chat 3D, automatic checks.

제작자: w1ne초기★ 3523일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · kernelcad.com
비슷한 항목과 비교
이 항목
Office Outlook MCP
emailmdKite Discord Bot Buildere2a — email for AI agentsInfobip MCPkernelCAD
실행 위치컴퓨터에 설치 필요클라우드 또는 컴퓨터 설치 모두 가능클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요예아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요예아니요
기본 점검2/35/54/44/44/44/4
라이선스–MITAGPL-3.0Apache-2.0MITMIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

office-outlook-mcp

MCP server for Outlook / Microsoft 365 — mail, folders, calendar, contacts and tasks, with confirmation-gated sending.

This project was developed and is maintained by AI (Claude Code). Use at your

own discretion.

How it authenticates

Outlook Web holds its access token in memory and sends it as Authorization: Bearer …. This server snapshots that header from your signed-in browser tab through the fetchproxy bridge, then talks to https://outlook.office.com/api/v2.0 with ordinary server-side requests.

The browser is needed only to mint the token (~25h), never to make a call. That is the whole design: no Azure app registration, no admin consent, and no browser on the request path.

Tokens are cached at ~/.office-outlook-mcp/token.json (0600), so a restart does not re-capture.

Install

npm i -g @chrischall/office-outlook-mcp

Requires the ContextMint Bridge browser extension, installed from its releases: in Chrome, unzip the chrome build and load it unpacked (chrome://extensions → Developer mode → Load unpacked). Safari is not available yet — it will ship inside the ContextMint app, which has no public download — so use Chrome for now.

ContextMint Bridge is the fetchproxy browser extension under its new name, from the same maintainer — fetchproxy's own README (#extension) points to it. Its source is public at nullnet-app/contextmint-bridge: build it yourself, or check a release zip against the .sha256 file published beside it (shasum -a 256 -c contextmint-bridge-chrome- .zip.sha256).

The extension, fpx and this server are compatible by fetchproxy protocol number (currently protocol 4), not by matching package versions. Keep the bridge and fpx current — a mismatch fails with an error naming both protocol numbers. Also install @fetchproxy/cli:

npm i -g @fetchproxy/cli

The first capture prints a 6-digit pair code to approve in the ContextMint Bridge popup; the grant persists.

Pairing

The server declares one host to the bridge — outlook.cloud.microsoft, or OUTLOOK_WEB_HOST — and the same scope on every capture, so once approved it neither re-pairs nor asks for wider grants. The bridge keeps one relay tab on that host open (it reuses yours if you already have Outlook open).

Before 0.8.2 it also declared outlook.office.com. A signed-in tab there redirects to outlook.cloud.microsoft, so the bridge opened another background tab on every capture. Upgrading changes the declared domain set, so the bridge asks to pair once more.

If you run the bridge in more than one browser or browser profile, each one is a different extension identity, and the server trusts only the one it paired with. Keep the bridge enabled in the browser you pair with (or re-pair deliberately with FETCHPROXY_TRUST_NEW_EXTENSION=1 after switching browsers).

Install in opencode

opencode reads MCP servers from opencode.json (project) or ~/.config/opencode/opencode.json (global):

{

"mcp": { "servers": { "outlook": { "type": "local", "command": ["npx", "-y", "@chrischall/office-outlook-mcp"] } } } }

That one file serves opencode 2 and current opencode 1 — verified live on 2.0.11, 1.18.31 and 1.18.28, which all connect from it.

Two things worth knowing, both measured rather than assumed:

  • Never carry both config shapes in one file. Older opencode 1 wants the servers directly under mcp ("mcp": { "outlook": { … } }), and the temptation is to write both so either version finds one. Do not: given a sibling key beside servers, opencode 2 parses the file — it still shows up in opencode debug config — and then reports *"No MCP servers configured"*. No error, no warning, every server silently gone.
  • An opencode 1 old enough to reject `servers` says so loudly (Configuration is invalid at …), so if you see that, switch that machine to the flat shape rather than combining them.

opencode 2 talks to a background service, so opencode reload before opencode mcp list after editing config.

Configuration

Everything is optional — with nothing set, the server captures from the browser.

variablepurpose
OUTLOOK_ACCESS_TOKENPre-obtained bearer token. Overrides the bridge. Power users / CI only; expires in ~25h and cannot be auto-refreshed.
OUTLOOK_DISABLE_FETCHPROXY1 to disable browser capture, requiring OUTLOOK_ACCESS_TOKEN.
OUTLOOK_API_BASEOverride the REST base URL. Defaults to https://outlook.office.com/api/v2.0.
OUTLOOK_WS_PORTfetchproxy concentrator port. Defaults to 37149, the fleet-wide shared port.
OUTLOOK_WEB_HOSTWhich Outlook Web host your signed-in tab is on: outlook.cloud.microsoft (default) or outlook.office.com for a tenant still on the legacy app. Only this one host is declared to the bridge — see Pairing.
OUTLOOK_CAPTURE_TIMEOUTSeconds to wait for the tab to make a readable request. Defaults to 30.
OUTLOOK_TOKEN_CACHEfalse to stop caching the token between runs.
OUTLOOK_TOKEN_FILEPath to the cached token. Defaults to ~/.office-outlook-mcp/token.json.
OUTLOOK_OUTPUT_DIRAbsolute directory outlook_export_messages and outlook_export_events write into, and where a local install saves the files outlook_get_attachment cannot return inline. Defaults to ~/Downloads/office-outlook-mcp (for attachments, only when ~/Downloads exists). When set, a per-call dest must be inside it. See Bulk export.

Tools

Read — outlook_list_folders, outlook_list_messages, outlook_get_message, outlook_list_unread_messages, outlook_list_attachments, outlook_get_attachment, outlook_list_events, outlook_get_event, outlook_list_calendars, outlook_find_meeting_times, outlook_get_schedule, outlook_get_profile, outlook_get_mailbox_settings, outlook_list_contacts, outlook_list_people, outlook_list_categories, outlook_list_tasks, outlook_list_rules

Write (ask you to confirm first — see Confirmations) — outlook_send_message, outlook_create_draft, outlook_update_draft, outlook_send_draft, outlook_mark_read, outlook_update_message, outlook_move_message, outlook_move_messages, outlook_batch, outlook_confirm, outlook_create_event, outlook_update_event, outlook_respond_to_invite, outlook_delete_event, outlook_reply, outlook_create_rule, outlook_update_rule, outlook_delete_rule, outlook_set_auto_reply, outlook_create_folder, outlook_update_folder (rename or move), outlook_delete_folder (permanent: the folder does not go to Deleted Items). Some skip the confirmation because nothing reaches anyone else: outlook_create_draft (the draft stays in Drafts until you send it with outlook_send_draft or from Outlook), outlook_create_folder (an empty folder is easily deleted), outlook_reply with draftOnly: true (the reply stays in Drafts), outlook_respond_to_invite with sendResponse: false, and outlook_delete_event on your own appointment with no attendees or on a meeting the organizer already cancelled (in each, only your calendar changes).

Meetings — outlook_find_meeting_times asks Outlook's Scheduling Assistant for slots when everyone is free, and outlook_get_schedule shows each person's busy blocks. Each suggested slot carries createEventArgs, which outlook_create_event accepts unchanged. outlook_create_event attaches a Microsoft Teams meeting by default and returns its join link; pass teamsMeeting: false to leave it off. outlook_update_event never changes how people join a meeting unless asked: pass teamsMeeting: true to add a Teams meeting to an event that lacks one, and the confirmation says so in plain words. Only the organizer can update a meeting. outlook_respond_to_invite accepts, tentatively accepts or declines an invite, by its message id or its event id. outlook_delete_event deletes an event you organize — one occurrence by the occurrence's id, or the whole series by its series master's id — and sends any attendees a cancellation; for an invite you received it refuses and points you at declining instead. outlook_list_events and outlook_get_event show what that decision needs in every view: MyResponse, ResponseRequested, IsOrganizer, IsCancelled, Type (SingleInstance, Occurrence, Exception or SeriesMaster), ShowAs and IsAllDay, plus SeriesMasterId in the full view.

Rules and automatic replies — outlook_list_rules shows inbox rules in the order Outlook applies them. outlook_create_rule needs at least one condition and one action; a rule that forwards or redirects mail names those recipients in its confirmation, because it keeps sending mail out until removed. outlook_update_rule sends only what you pass, and conditions, exceptions or actions replace that whole group. outlook_set_auto_reply changes only what you pass, and its confirmation shows the exact text that will go out, including stored text you did not change. Read the current auto-reply with outlook_get_mailbox_settings.

Moving many messages — outlook_move_messages moves every message in a folder (default the inbox) that matches a filter — sender addresses (from), receivedBefore / receivedAfter, isRead, subjectContains, minus exceptSubjectContains — to another folder, under one confirmation for the whole set. It only moves, never deletes. At least one condition is required. The preview shows how many match, the filter, the destination and a sample of 10; it moves at most max per call (default 1000, at most 5000), newest first, and reports the rest as remaining, so a second call moves the next set. Each call reads every matching message in the folder so remaining is exact, which takes longer in a very large folder. To run an inbox rule over mail that arrived before it, pass the rule's senders as from, its exceptions as exceptSubjectContains, and markRead: true if the rule marks mail read. Every call lists the folder afresh: if the matching mail changed before you approved, you get a new preview instead of a move. One failed message does not stop the rest; the result counts moved, failedCount (first 20 listed), markedRead and any unknown (timed out — may have moved; check before retrying).

Several changes at once — outlook_batch runs up to 100 mailbox writes (outlook_move_message, outlook_mark_read, outlook_update_message, outlook_create_rule, outlook_update_rule, outlook_delete_rule, outlook_create_folder, outlook_update_folder) under one preview and one approval, in order. An op can take an earlier op's output through refs: create a folder, then a rule that files into it with {"tool": "outlook_create_rule", "args": {…}, "refs": {"moveToFolder": "0.id"}}. It stops at the first failure and has no rollback — the result says which ops were applied, which failed and which never ran. Nothing that emails anyone (sends, replies, invites, events, drafts, automatic replies) can ride in a batch. outlook_confirm finishes any previewed write with its confirmToken alone, so the arguments need not be sent twice.

Export — outlook_export_messages (mail) and outlook_export_events (calendar) write JSONL or Markdown files, optionally with attachments, and return only where they are; see Bulk export.

Copilot — outlook_ask_copilot puts a question to Microsoft 365 Copilot with your mailbox as context; see Microsoft 365 Copilot.

Diagnostics — outlook_healthcheck

Every read tool takes `view: compact | full |

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요