프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Sizeverdict

제작자: CloudCorpRecords버전 0.1.0i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.CloudCorpRecords/sizeverdict

설치

개요

제작자가 쓴 설명(영어 원문)

Weigh a dependency's bundle cost from supplied module sizes, with shipped overlap netted.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • npmNode.js 설치(npx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "sizeverdict": {
      "command": "npx",
      "args": [
        "-y",
        "@reneturcios/sizeverdict",
        "mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add sizeverdict -- npx -y @reneturcios/sizeverdict mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "sizeverdict": {
      "command": "npx",
      "args": [
        "-y",
        "@reneturcios/sizeverdict",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "sizeverdict": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@reneturcios/sizeverdict",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 CloudCorpRecords 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32415개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32415개 중 90%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32415개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Sizeverdict, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.1.0)은 3일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js, Docker도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, Safe Fetch

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

Safe Fetch

제작자: Sanoy24

MCP server for fetching URLs, safe against SSRF, DNS rebinding, and redirect-to-internal attacks.

내 컴퓨터에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

sizeverdict

Adding a dependency is easy to agree to and hard to price. The headline size in a package listing is not what you actually pay: part of the new code may already be in your bundle, shipped by dependencies you already depend on. sizeverdict works out the real price from numbers you already have. You supply the candidate's modules with a path and a byte size for each one, the same facts for any dependencies you already ship, and optionally a budget for net new bytes. sizeverdict hands back the candidate's total bytes, the bytes that are already shipped, the net new cost, an overlap list, and a verdict band. It never downloads, installs, or measures a package; it computes from the supplied facts only.

A candidate module counts as overlapping when its exact path appears in at least one installed dependency's module list. Shared bytes are summed at the candidate's sizes, and each overlapping module is counted once, even when two installed dependencies carry the same path — the installed dependencies' own sizes for that path are never used. The overlap list holds one entry per overlapping module, sorted by path, each with the candidate's size and the distinct names of the installed dependencies carrying that path, sorted ascending. Net new bytes are candidate bytes minus shared bytes.

The verdict is read off the net new cost. Zero net new bytes is free_overlap. Up to 10240 bytes is negligible, up to 102400 is small, up to 512000 is moderate, and anything above that is large. Each threshold is inclusive at the top of its band: 10240 is still negligible, 10241 is small, and so on. When you supply budget_bytes, the result also reports whether the net new cost is over it; landing exactly on the budget is not over.

Malformed input — a missing candidate, a missing, empty, or non-string name, a missing or empty module list, a module with a missing or empty path or a negative or fractional byte size, the same faults inside an installed dependency, or a bad budget — is a validation error naming the offending path, with no partial result. Two modules with the same path inside one package, two installed dependencies with the same name, and a candidate whose name matches an installed dependency (candidate already installed: X) are also errors. Unknown extra fields are ignored.

CLI

npx @reneturcios/sizeverdict assess --input args.json

npx @reneturcios/sizeverdict --version

args.json contains the full arguments object:

{

"candidate": { "name": "left-pad-plus", "modules": [ { "path": "index.js", "bytes": 4000 }, { "path": "lib/util.js", "bytes": 9000 }, { "path": "lib/extra.js", "bytes": 2000 } ] }, "installed": [ { "name": "utils-kit", "modules": [ { "path": "lib/util.js", "bytes": 8500 } ] } ], "budget_bytes": 10000 }

The assessment is printed as JSON:

{

"candidate": "left-pad-plus", "candidate_bytes": 15000, "shared_bytes": 9000, "net_new_bytes": 6000, "overlap": [ { "path": "lib/util.js", "bytes": 9000, "also_in": ["utils-kit"] } ], "verdict": "negligible", "budget": { "budget_bytes": 10000, "net_new_bytes": 6000, "over_budget": false } }

Note the shared module contributes the candidate's 9000 bytes, not the installed copy's 8500. Exit codes: 0 on success, 1 on a runtime error (including an unreadable or invalid input file, or invalid input), 2 on a usage error.

MCP server

npx -y @reneturcios/sizeverdict mcp

MCP client config:

{

"mcpServers": { "sizeverdict": { "command": "npx", "args": ["-y", "@reneturcios/sizeverdict", "mcp"] } } }

Tools
  • assess_bundle_cost — Weigh a candidate dependency's real bundle cost from caller-supplied module sizes: total bytes, the modules already shipped via installed deps (shared bytes), the net new cost, and a verdict band.
  • candidate (object, required) — the dependency being weighed:
  • name (string, required, non-empty) — candidate package name
  • modules (array, required, at least 1 item) — the candidate's shipped modules; each item:
  • path (string, required, non-empty) — module path inside the package
  • bytes (integer, required, at least 0) — module size in bytes
  • installed (array, optional) — dependencies already shipped, same shape as the candidate; each item has a name and a modules list in the same form. Absent means none are shipped.
  • budget_bytes (integer, optional, at least 0) — net-new-bytes budget to check against

Returns {candidate, candidate_bytes, shared_bytes, net_new_bytes, overlap, verdict, budget}, where candidate echoes the candidate's name, overlap holds one {path, bytes, also_in} per overlapping candidate module sorted by path, verdict is one of free_overlap, negligible, small, moderate, or large, and budget is {budget_bytes, net_new_bytes, over_budget} or null when no budget was supplied.

Docker

docker run -i ghcr.io/cloudcorprecords/sizeverdict

docker run --rm -v "$PWD:/w" ghcr.io/cloudcorprecords/sizeverdict assess --input /w/args.json

Development

npm install

npm run build # tsc -> dist/ npm test # tsx --test test/*.test.ts (pure local, no network) npm run dev # run the CLI from source

License

MIT — Copyright (c) 2026 Rene Turcios

PopNx에게 묻기