World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Italian e-invoicing: FatturaPA XML/SDI, XSD v1.2.3, Specs 1.9.1, 43 tools. Signing, SDI, archiving.
제작자가 쓴 원문
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 6/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 7/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 13/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Fattura Elettronica IT 설치해 줘. https://mcp.popnx.com/i/cmendezs-mcp-fattura-elettronica-it.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Fattura Elettronica IT을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "fattura-elettronica-it": { "command": "uvx", "args": [ "mcp-fattura-elettronica-it" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Fattura Elettronica IT의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"fattura-elettronica-it": {
"command": "uvx",
"args": [
"mcp-fattura-elettronica-it"
]
}
}
}Fattura Elettronica IT을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Fattura Elettronica IT을 쓰고 있다고 하거나 답에 Fattura Elettronica IT 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
FATTURA_XSD_PATH 로컬에 있는 FatturaPA XSD 스키마 파일 복사본의 경로(선택 사항 — 설정하지 않으면 내장 스키마 사용) 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Fattura Elettronica IT에 연결할 수 없어요
Fattura Elettronica IT는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Fattura Elettronica IT에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Fattura Elettronica IT을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user fattura-elettronica-it -- uvx mcp-fattura-elettronica-it 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Fattura Elettronica IT의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user fattura-elettronica-it -- uvx mcp-fattura-elettronica-itFattura Elettronica IT이 목록에 있고 연결됨으로 보이면 돼요
Fattura Elettronica IT을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Fattura Elettronica IT을 쓰고 있다고 하거나 답에 Fattura Elettronica IT 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
FATTURA_XSD_PATH 로컬에 있는 FatturaPA XSD 스키마 파일 복사본의 경로(선택 사항 — 설정하지 않으면 내장 스키마 사용) 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Fattura Elettronica IT을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "fattura-elettronica-it": { "command": "uvx", "args": [ "mcp-fattura-elettronica-it" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Fattura Elettronica IT의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Fattura Elettronica IT을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Fattura Elettronica IT을 쓰고 있다고 하거나 답에 Fattura Elettronica IT 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
FATTURA_XSD_PATH 로컬에 있는 FatturaPA XSD 스키마 파일 복사본의 경로(선택 사항 — 설정하지 않으면 내장 스키마 사용) 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Fattura Elettronica IT을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "fattura-elettronica-it": { "type": "stdio", "command": "uvx", "args": [ "mcp-fattura-elettronica-it" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Fattura Elettronica IT의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Fattura Elettronica IT을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Fattura Elettronica IT을 쓰고 있다고 하거나 답에 Fattura Elettronica IT 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
FATTURA_XSD_PATH 로컬에 있는 FatturaPA XSD 스키마 파일 복사본의 경로(선택 사항 — 설정하지 않으면 내장 스키마 사용) 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Claude Code
claude mcp add --scope user fattura-elettronica-it -- uvx mcp-fattura-elettronica-itClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"fattura-elettronica-it": {
"command": "uvx",
"args": [
"mcp-fattura-elettronica-it"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"fattura-elettronica-it": {
"command": "uvx",
"args": [
"mcp-fattura-elettronica-it"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"fattura-elettronica-it": {
"type": "stdio",
"command": "uvx",
"args": [
"mcp-fattura-elettronica-it"
]
}
}
}FATTURA_XSD_PATH env설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검
레지스트리 이름이 GitHub 계정 cmendezs 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 2개월 전
Apache-2.0 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 mcp-fattura-elettronica-it@0.9.1 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/cmendezs-mcp-fattura-elettronica-it)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 2개월 전 변경됐고, 최신 버전(0.9.1)은 2개월 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 Fattura Elettronica IT | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | Apache-2.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
A Python MCP server for Italian electronic invoicing in FatturaPA XML format (SDI / Agenzia delle Entrate standard, XSD v1.2.3, Specifiche Tecniche 1.9.1). It enables AI agents (Claude, IDEs) to generate, validate, and analyze B2B, B2G, and cross-border electronic invoices that are directly compliant with the technical specifications of the Sistema di Interscambio (SDI). It is built on mcp-einvoicing-core, the shared base library for e-invoicing MCP servers.
Note: "Specifiche Tecniche" (the AdE Allegato A controls/codifiche document) and the XSD schema are two separate artefacts with independent version numbers. Specifiche Tecniche 1.9.1 (in force 2026-05-15) does not change the XSD — the bundled schema remains v1.2.3.
This is a Model Context Protocol (MCP) server exposing 43 tools covering the full lifecycle of a FatturaPA XML document: transmission header construction, seller/buyer validation (including Gruppo IVA / VAT-group CodiceFiscale), document type codes (TD01-TD28), line items with AltriDatiGestionali support, VAT summary computation, payment terms, XSD validation against the official Agenzia delle Entrate schema (v1.2.3), XML generation, parsing, JSON export, SDI filename generation, withholding tax (ritenuta d'acconto) calculation, digital signatures (XAdES-BES and CAdES-BES), direct SDI transmission via SDICoop SOAP, SDI notification parsing, and conservazione sostitutiva (legally compliant archiving per AgID). Licensed under Apache 2.0.
pip install mcp-fattura-elettronica-it
mcp-einvoicing-core is installed automatically as a dependency. lxml is also required and included, so no extra steps are needed.
Without prior installation, using uvx:
uvx mcp-fattura-elettronica-it
git clone https://github.com/cmendezs/mcp-fattura-elettronica-it.git
cd mcp-fattura-elettronica-it
python -m venv .venv source .venv/bin/activate # Windows: .venv\Scripts\activate
pip install -e ".[dev]" cp .env.example .env
The available environment variables are:
| Variable | Description | Default |
|---|---|---|
LOG_LEVEL | Log level (DEBUG, INFO, WARNING, ERROR) | INFO |
FATTURA_XSD_PATH | Path to the FatturaPA XSD file | schemas/FatturaPA_v1.2.3.xsd |
SDI_ENVIRONMENT | SDI environment: test or production | test |
SDI_CERT_PATH | Path to the PKCS#12 mTLS certificate for SDI | (none) |
SDI_CERT_PASSWORD | Passphrase for the PKCS#12 file | (none) |
SDI_ENDPOINT_URL | SDICoop endpoint URL override | (auto from environment) |
SDI_CHANNEL_ID | Channel ID assigned during AdE accreditation | (none) |
EINVOICING_SIGNER_SOCKET | Unix socket for the signer microservice | (none) |
EINVOICING_SIGNER_TOKEN | Auth token for the signer microservice | (none) |
CONSERVAZIONE_STORAGE_PATH | Local archive storage path (dev only) | .conservazione/ |
Add the following to your claude_desktop_config.json file:
{
"mcpServers": { "fattura-elettronica-it": { "command": "uvx", "args": ["mcp-fattura-elettronica-it"], "env": { "SDI_ENVIRONMENT": "test", "SDI_CERT_PATH": "/path/to/your-cert.p12", "SDI_CERT_PASSWORD": "your-cert-password", "SDI_CHANNEL_ID": "your-channel-id" } } } }
Cursor supports MCP servers via stdio. Add the configuration in:
~/.cursor/mcp.json.cursor/mcp.json{
"mcpServers": { "fattura-elettronica-it": { "command": "uvx", "args": ["mcp-fattura-elettronica-it"], "env": { "SDI_ENVIRONMENT": "test", "SDI_CERT_PATH": "/path/to/your-cert.p12", "SDI_CERT_PASSWORD": "your-cert-password", "SDI_CHANNEL_ID": "your-channel-id" } } } }
Reload the Cursor window (Ctrl+Shift+P then *Reload Window*) to apply the changes.
Kiro supports MCP servers via its dedicated configuration file. Two levels are available:
~/.kiro/settings/mcp.json.kiro/settings/mcp.json{
"mcpServers": { "fattura-elettronica-it": { "command": "uvx", "args": ["mcp-fattura-elettronica-it"], "env": { "SDI_ENVIRONMENT": "test", "SDI_CERT_PATH": "/path/to/your-cert.p12", "SDI_CERT_PASSWORD": "your-cert-password", "SDI_CHANNEL_ID": "your-channel-id" }, "disabled": false, "autoApprove": [] } } }
The file is automatically reloaded on save. You can also open the config via the command palette (Cmd+Shift+P / Ctrl+Shift+P) then *MCP*.
Kiro security tip: rather than writing secrets in plain text, use the syntax
"SDI_CERT_PASSWORD": "${SDI_CERT_PASSWORD}", Kiro resolves shell environment variables at startup.
| Tool | Description |
|---|---|
build_transmission_header | Build DatiTrasmissione block: ProgressivoInvio, CodiceDestinatario, PECDestinatario |
validate_cedente_prestatore | Validate seller block: IdFiscaleIVA, optional Gruppo IVA member CodiceFiscale, Anagrafica, Sede, RegimeFiscale codes |
validate_cessionario | Validate buyer block: IdFiscaleIVA or CodiceFiscale, Sede (warns on the structural precondition of scarto code 00327 for Gruppo IVA) |
get_regime_fiscale_codes | Return all valid RegimeFiscale codes with descriptions (RF01-RF19) |
validate_partita_iva | Validate Italian VAT number (Partita IVA) format and checksum (11 digits) |
generate_progressivo_invio | Generate a unique ProgressivoInvio identifier (max 10 alphanumeric chars) |
lookup_codice_destinatario | Return info about a CodiceDestinatario (6-char SDI code) or PEC address (300-code max per accredited channel, Specifiche Tecniche 1.9.1) |
| Tool | Description |
|---|---|
build_dati_generali | Build DatiGenerali block: TipoDocumento, Divisa, Data, Numero, Causale |
get_tipo_documento_codes | Return all TD01-TD28 codes with descriptions and use cases (incl. cross-border) |
add_linea_dettaglio | Add a DettaglioLinee entry: NumeroLinea, Descrizione, Quantita, PrezzoUnitario, optional AltriDatiGestionali |
build_sport_worker_exemption_dato_gestionale | Build the AltriDatiGestionali entry for the sport-worker IRPEF exemption (TipoDato='ESENZSPORT', Specifiche Tecniche 1.9.1) |
compute_totali | Compute DatiRiepilogo: imponibile, imposta, AliquotaIVA from line items |
get_natura_codes | Return all Natura codes (N1-N7 and sub-codes) for VAT exemption with legal references |
build_dati_pagamento | Build DatiPagamento: CondizioniPagamento (TP01/02/03), ModalitaPagamento (MP01-MP23) |
add_allegato | Attach a base64-encoded document to the Allegati block with name and format |
| Tool | Description |
|---|---|
generate_fattura_xml | Generate a complete FatturaPA XML file from structured input data |
validate_fattura_xsd | Validate a FatturaPA XML string against the official XSD schema v1.2.3 |
parse_fattura_xml | Parse an existing FatturaPA XML string and return a structured JSON dict |
export_to_json | Export a parsed FatturaPA structure to clean JSON format |
validate_partita_iva_format | Validate Partita IVA format and Luhn-like checksum (11-digit Italian VAT) |
get_sdi_filename | Generate the official SDI filename: IT{PartitaIVA}_{ProgressivoInvio}.xml |
check_ritenuta_acconto | Check and compute ritenuta d'acconto (withholding tax) for professional invoices |
| Tool | Description |
|---|---|
generate_fattura_semplificata | Generate a simplified invoice XML (TD07/TD08/TD09) using VFSM10 format |
validate_fattura_semplificata_xsd | Validate a simplified invoice XML against the VFSM10 XSD v1.0.2 |
parse_fattura_semplificata_xml | Parse a simplified invoice XML into a structured dict |
Simplified invoices (art. 21-bis DPR 633/72) are valid for transactions up to EUR 400 (tax-inclusive). They use a flatter structure than ordinary FatturaPA: no per-line VAT breakdown, no DatiRiepilogo. Each DatiBeniServizi entry carries its own Descrizione, Importo, and DatiIVA. The VFSM10 format uses namespace v1.0 and is separate from the EN 16931 CIUS used by ordinary invoices.
| Tool | Description |
|---|---|
sign_fattura_xades | Apply XAdES-BES enveloped XML signature (.xml). Requires PKCS#12 cert. |
sign_fattura_cades | Apply CAdES-BES CMS/PKCS#7 attached signature (.xml.p7m). Requires PKCS#12 cert. |
Both signature formats are accepted by SDI (Specifiche tecniche SDI v1.8.4, section 2.1). Supports dual mode: signer microservice (keeps keys out of the MCP process) or direct PKCS#12 loading. Requires cryptography>=42.0.0 (installed via the [xml-sign] extra on mcp-einvoicing-core).
| Tool | Description |
|---|---|
submit_to_sdi | Submit a signed invoice to SDI via SDICoop SOAP (mTLS) |
check_sdi_status | Check submission status by IdentificativoSDI |
parse_sdi_notification | Parse SDI notification XML (RC/NS/MC/NE/EC/SE/DT/MT/AT); known scarto codes (e.g. 00327, Gruppo IVA CodiceFiscale) include a supplementary reference_note |
send_esito_committente | Send acceptance (EC01) or rejection (EC02) to SDI |
get_sdi_channel_info | Show current SDI channel configuration |
Requires AdE accreditation for production use. Configure via SDI_CERT_PATH, SDI_CERT_PASSWORD, SDI_ENVIRONMENT (test/production), and SDI_ENDPOINT_URL (override) environment variables.
| Tool | Description |
|---|---|
archive_invoice | Archive a signed invoice with SHA-256 hash and 10-year retention |
retrieve_archived_invoice | Retrieve an archived document by ID |
verify_archive_integrity | Verify SHA-256 hash integrity of an archived document |
list_archived_invoices | List all archived invoices |
build_pacchetto_versamento | Build a PdV ZIP archive for transfer to an AgID-accredited conservator |
Per AgID circolare 65/2014 and DM 17/06/2014, electronic invoices must be archived for a minimum of 10 years. The local filesystem backend is for development only; production requires integration with an AgID-accredited conservazione provider.
Example 1: Generate a complete B2B invoice
1. validate_partita_iva_format("01234567897")
→ { "valid": true }