프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Eu Verify

제작자: contentfactory버전 1.4.0i★ –i클라우드에서 실행
레지스트리 이름io.github.contentfactory/eu-verify

설치

개요

제작자가 쓴 설명(영어 원문)

European business verification for AI agents: registry, VAT, sanctions, IBAN. Pay-per-call x402.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://data.greeneris.io/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http eu-verify https://data.greeneris.io/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "eu-verify": {
      "url": "https://data.greeneris.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "eu-verify": {
      "type": "http",
      "url": "https://data.greeneris.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://data.greeneris.io/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

아직 이 서버의 도구 목록을 읽지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 contentfactory 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    엔드포인트 응답

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    OAuth로 로그인

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    아직 점검하지 않았어요. 엔드포인트를 점검할 때 도구 목록을 읽어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32461개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32461개 중 19%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32461개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Eu Verify, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.4.0)은 3개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, dotnet-mcp

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

dotnet-mcp

제작자: Skymly

MCP server for .NET symbols, XAML, source generators, and restricted workspace edit

내 컴퓨터에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

eu-verify — European business verification for AI agents

· MCP Registry · data.greeneris.io

Your agent can verify any European business partner — and pay for it by itself.

One call, full due diligence: verify_supplier_fr checks a French company's existence, insolvency, VAT and sanctions in a single request and returns a risk verdict. Or use the building blocks: company registry, insolvency (BODACC), EU VAT (VIES), SIRET / IBAN / LEI / EORI checks, sanctions screening (EU/OFAC/UN/UK/FR), address and email verification, French business-day deadlines, EU public tenders.

No account. No API key. Each call costs $0.001–$0.05 in USDC on Base, paid automatically through the x402 protocol — the payment *is* the authentication.


Why your agent needs this

Every intra-EU B2B invoice legally requires a valid VAT number. Every serious supplier onboarding requires a company existence check. These are actions that procurement, compliance and due-diligence agents repeat thousands of times — and the official European data behind them was never packaged for agents. Now it is.

MCP toolWhat it answersSourcePrice
`verify_supplier_fr`One-call risk verdict: existence + insolvency + VAT + sanctionsSIRENE + BODACC + VIES + sanctions$0.05
screen_sanctionsIs this name on a sanctions list? (EU, OFAC, UN, UK, FR)5 official lists, refreshed daily$0.01
lookup_company_frDoes this French company exist? Status, NAF, HQ, financesINSEE Sirene (official)$0.005
lookup_company_ukUK company profile + officers + PSC (quasi-UBO) + risk flagsCompanies House (official)$0.01
check_insolvency_frAny insolvency / liquidation proceedings?BODACC (official gazette)$0.01
invoice_ready_frIs this SIREN invoiceable? (checksum + existence + VAT)SIRENE + VIES$0.02
validate_vat_euIs this EU VAT number valid? (pre-invoicing check)VIES (European Commission)$0.005
validate_siret_frIs this SIREN/SIRET well-formed? (offline checksum)ISO/Luhn$0.001
validate_ibanIs this IBAN valid? (85 countries, offline)ISO 13616 mod-97$0.001
check_eoriIs this EU customs (EORI) operator registered?EU EOS/DDS2 (official)$0.003
lookup_lei / lei_ownershipResolve a Legal Entity Identifier + ownership chainGLEIF (official)$0.005
verify_address_frDoes this French address exist? GeocodedBase Adresse Nationale$0.001
validate_emailWill email to this address be deliverable? Live MX checkDNS-over-HTTPS$0.005
business_days_frDeadline N business days from date X in Francecomputed (incl. holidays)$0.005
find_public_tenders_euRecent EU public tenders by sector/countryTED (Official Journal EU)$0.01
catalogEverything this shop sells—free

Plus 6 more national company registries at $0.003 (/v1/{no,cz,pl,fi,sk,ie}/company — Norway, Czechia, Poland, Finland, Slovakia, Ireland) and 70+ supporting data endpoints (FX, macro, energy, weather, crypto) at commodity prices — see /llms.txt.

Buyers are never charged for empty or failed answers (an upstream failure returns an error *before* settlement). No personal data is served (GDPR: director names are stripped from registry answers).


Use it from an agent (MCP)

Claude Code:

claude mcp add --transport http eu-verify https://data.greeneris.io/mcp

Cursor / any MCP client (mcpServers config):

{

"mcpServers": { "eu-verify": { "url": "https://data.greeneris.io/mcp" } } }

Then just ask: *"Run a supplier risk check on SIREN 552032534"* — the agent calls verify_supplier_fr and gets back existence, insolvency, VAT and sanctions in one verdict. Or: *"Screen 'ACME Trading' against sanctions lists before we onboard them."*

Payments over MCP: a paid tool called without payment returns the x402 quote in the response _meta; x402-aware MCP clients (e.g. the x402 Python SDK's MCP client, AWS Bedrock AgentCore) attach the USDC payment and retry automatically. Clients without wallet support can read the quote and fall back to the HTTP API.


Use it over plain HTTP (x402)

Every endpoint answers HTTP 402 with a machine-readable quote until paid:

curl -i "https://data.greeneris.io/v1/fr/company?q=airbus"

HTTP/1.1 402 Payment Required

payment-required: eyJ4NDAyVmVyc2lvbiI6Miw... <- base64 quote (price, payTo, network)

Paying client in Python (~15 lines, examples/buy_with_python.py):

from eth_account import Account

from x402 import x402Client from x402.http.clients import x402HttpxClient from x402.mechanisms.evm.exact import register_exact_evm_client

buyer = Account.from_key(PRIVATE_KEY) # a wallet holding a little USDC on Base client = x402Client() register_exact_evm_client(client, buyer)

async with x402HttpxClient(client) as http: # reads the 402, pays, retries r = await http.get("https://data.greeneris.io/v1/eu/vat-check?cc=IE&vat=6388047V") print(await r.aread())

TypeScript and other languages: see the official x402 SDKs.


Trust

  • Official sources only: INSEE, European Commission (VIES, TED, EORI), DILA (BODACC), GLEIF, Base Adresse Nationale, and the EU/OFAC/UN/UK/FR sanctions lists — refreshed at source frequency.
  • Fail-safe billing: settlement happens only after a successful answer.
  • Uptime: monitored 24/7; live status at /agent-status.
  • Payments: settled on-chain by the Coinbase x402 facilitator; every sale is publicly auditable on x402scan.

License

The examples in this repository are MIT-licensed. The API itself is a paid service — each response includes its source attribution.

PopNx에게 묻기