프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Bambu Studio (unofficial)

제작자: danielefinocchiaro버전 0.3.0i★ 4i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.danielefinocchiaro/unofficial-bambu-mcp

설치 방법

What it does

Build, edit, slice, check and calibrate Bambu Studio projects; read a Bambu Lab printer's status.

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 기타

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기8/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수20/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Bambu Studio (unofficial) 설치해 줘. https://mcp.popnx.com/i/danielefinocchiaro-unofficial-bambu-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server Bambu Studio (unofficial)을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "unofficial-bambu": { "command": "uvx", "args": [ "unofficial-bambu-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Bambu Studio (unofficial)의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  3. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "unofficial-bambu": {
          "command": "uvx",
          "args": [
            "unofficial-bambu-mcp"
          ]
        }
      }
    }
  4. Claude를 끄고 다시 열기

  5. 해 보기

    Bambu Studio (unofficial)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Bambu Studio (unofficial)을 쓰고 있다고 하거나 답에 Bambu Studio (unofficial) 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • UBMCP_DIR 프로젝트, 슬라이스된 파일, 출력 파일이 저장되는 위치 (기본값 /Documents/unofficial-bambu-mcp)
    영어 원문 보기Where projects, sliced files and print files are saved (default ~/Documents/unofficial-bambu-mcp)
  • BAMBU_STUDIO_EXE 자동으로 찾을 수 없는 경우 Bambu Studio 실행 파일의 경로.
    영어 원문 보기Path of the Bambu Studio executable, if it is not found automatically
  • BAMBU_PRINTER_IP 프린터 IP 주소. 로컬 네트워크 검색을 건너뜁니다
    영어 원문 보기Printer IP address, to skip the search on the local network

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Bambu Studio (unofficial)에 연결할 수 없어요

Bambu Studio (unofficial)는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Bambu Studio (unofficial)에 연결되는 앱 쓰기

  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

B · 기타에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Bambu Studio (unofficial)을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user unofficial-bambu -- uvx unofficial-bambu-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Bambu Studio (unofficial)의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  3. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user unofficial-bambu -- uvx unofficial-bambu-mcp
  4. Claude Code에서 /mcp 입력

    Bambu Studio (unofficial)이 목록에 있고 연결됨으로 보이면 돼요

  5. 해 보기

    Bambu Studio (unofficial)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Bambu Studio (unofficial)을 쓰고 있다고 하거나 답에 Bambu Studio (unofficial) 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • UBMCP_DIR 프로젝트, 슬라이스된 파일, 출력 파일이 저장되는 위치 (기본값 /Documents/unofficial-bambu-mcp)
    영어 원문 보기Where projects, sliced files and print files are saved (default ~/Documents/unofficial-bambu-mcp)
  • BAMBU_STUDIO_EXE 자동으로 찾을 수 없는 경우 Bambu Studio 실행 파일의 경로.
    영어 원문 보기Path of the Bambu Studio executable, if it is not found automatically
  • BAMBU_PRINTER_IP 프린터 IP 주소. 로컬 네트워크 검색을 건너뜁니다
    영어 원문 보기Printer IP address, to skip the search on the local network

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Bambu Studio (unofficial)을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "unofficial-bambu": { "command": "uvx", "args": [ "unofficial-bambu-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Bambu Studio (unofficial)의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  3. Cursor에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Bambu Studio (unofficial)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Bambu Studio (unofficial)을 쓰고 있다고 하거나 답에 Bambu Studio (unofficial) 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • UBMCP_DIR 프로젝트, 슬라이스된 파일, 출력 파일이 저장되는 위치 (기본값 /Documents/unofficial-bambu-mcp)
    영어 원문 보기Where projects, sliced files and print files are saved (default ~/Documents/unofficial-bambu-mcp)
  • BAMBU_STUDIO_EXE 자동으로 찾을 수 없는 경우 Bambu Studio 실행 파일의 경로.
    영어 원문 보기Path of the Bambu Studio executable, if it is not found automatically
  • BAMBU_PRINTER_IP 프린터 IP 주소. 로컬 네트워크 검색을 건너뜁니다
    영어 원문 보기Printer IP address, to skip the search on the local network

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Bambu Studio (unofficial)을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "unofficial-bambu": { "type": "stdio", "command": "uvx", "args": [ "unofficial-bambu-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Bambu Studio (unofficial)의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  3. VS Code에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Bambu Studio (unofficial)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Bambu Studio (unofficial)을 쓰고 있다고 하거나 답에 Bambu Studio (unofficial) 도구 이름이 나오면 연결된 거예요

추가 설정 3개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • UBMCP_DIR 프로젝트, 슬라이스된 파일, 출력 파일이 저장되는 위치 (기본값 /Documents/unofficial-bambu-mcp)
    영어 원문 보기Where projects, sliced files and print files are saved (default ~/Documents/unofficial-bambu-mcp)
  • BAMBU_STUDIO_EXE 자동으로 찾을 수 없는 경우 Bambu Studio 실행 파일의 경로.
    영어 원문 보기Path of the Bambu Studio executable, if it is not found automatically
  • BAMBU_PRINTER_IP 프린터 IP 주소. 로컬 네트워크 검색을 건너뜁니다
    영어 원문 보기Printer IP address, to skip the search on the local network

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Bambu Studio (unofficial)을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user unofficial-bambu -- uvx unofficial-bambu-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "unofficial-bambu": {
      "command": "uvx",
      "args": [
        "unofficial-bambu-mcp"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "unofficial-bambu": {
      "command": "uvx",
      "args": [
        "unofficial-bambu-mcp"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "unofficial-bambu": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "unofficial-bambu-mcp"
      ]
    }
  }
}

직접 입력할 값

  • UBMCP_DIR env
    프로젝트, 슬라이스된 파일, 출력 파일이 저장되는 위치 (기본값 /Documents/unofficial-bambu-mcp)
    영어 원문 보기Where projects, sliced files and print files are saved (default ~/Documents/unofficial-bambu-mcp)
  • BAMBU_STUDIO_EXE env
    자동으로 찾을 수 없는 경우 Bambu Studio 실행 파일의 경로.
    영어 원문 보기Path of the Bambu Studio executable, if it is not found automatically
  • BAMBU_PRINTER_IP env
    프린터 IP 주소. 로컬 네트워크 검색을 건너뜁니다
    영어 원문 보기Printer IP address, to skip the search on the local network

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
126/주
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.3.0
카테고리i
기타
레지스트리 공개i
2026년 10월 28일
코드 마지막 변경i
2026년 11월 2일
제작자
danielefinocchiaro
패키지
pypi: unofficial-bambu-mcp
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 danielefinocchiaro 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 17일 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 unofficial-bambu-mcp@0.3.0 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/danielefinocchiaro-unofficial-bambu-mcp.svg)](https://mcp.popnx.com/en/servers/danielefinocchiaro-unofficial-bambu-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 20749개 중 94%보다 스타가 많아요
  • 이 카테고리의 다른 서버 20749개 중 66%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 20749개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Bambu Studio (unofficial), 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 17일 전 변경됐고, 최신 버전(0.3.0)은 22일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

제작자: koala73널리 사용됨★ 9.1만3일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

제작자: openstatusHQ널리 사용됨★ 9.3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

제작자: Klavis-AI성장 중★ 5.8천14개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

제작자: jitsucom널리 사용됨★ 5.1천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · jitsu.com
비슷한 항목과 비교
이 항목
Bambu Studio (unofficial)
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/44/44/41/44/4
라이선스MITAGPL-3.0AGPL-3.0MITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

unofficial-bambu-mcp

Unofficial community project. Not affiliated with, endorsed by or supported by Bambu Lab.

"Bambu Lab", "Bambu Studio", "Bambu Connect" and "Bambu Handy" are trademarks of their respective owners.

An MCP server that lets an AI assistant (Claude Code, Claude Desktop or any MCP client) build, edit, slice, check and calibrate Bambu Studio projects, using the official Bambu Studio you already have installed, and read your printer's status on the local network.

You talk, it does the slicer work:

  • *"New P1S project: a 20 mm cube and the text 'DANI' in white on a black 2 mm tag."*
  • *"Open ~/Downloads/Gnome 3 Color.3mf, add a plate with two more gnomes, then convert it for the A1 mini."*
  • *"I have eSUN PLA Basic in AMS slot 2: make a preset for it and the test prints to calibrate it."*
  • *"Before I start this 20-hour plate: which parts are likely to come off?"*
  • *"A pin came off at layer 4 and I skipped it: make me a project to reprint just that pin, with a brim."*
  • *"How is the print going? Which spool is it feeding from?"*

A real session, sped up: every tool call, result and image comes from the server through MCP; only the requests are written for the demo (scripts/make_demo.py).

What it can do

AreaWhat you can do
ProjectsCreate a project, or open any .3mf saved by Bambu Studio (2.x and older 1.6/1.7 files) or downloaded from MakerWorld / Printables: painted colors, modifiers, per-object settings, instances and plates are kept. Save without ever overwriting.
PrintersAll 14 Bambu Lab printers of Bambu Studio 2.8, tested end to end (project, arrange, slice, print file): A1 mini, A1, A2L, P1P, P1S, P2S, X1, X1 Carbon, X1E, H2S and the two-nozzle H2D, H2D Pro, H2C and X2D (filaments go to a nozzle automatically, as Bambu Studio does). Switch printer and objects are re-arranged for the new bed. New projects use the build plate you picked in Bambu Studio for that printer.
FilamentsAMS slots with preset and color, your own user presets included. use_ams_filaments takes what is loaded in the AMS right now.
Plates & objectsImport STL, OBJ, 3MF; boxes, cylinders, cones, spheres and text (with a base in another color). Move, rotate, scale, mirror, lay flat, auto orient (least support, enough on the bed), duplicate, fill the plate with copies, split into objects or parts, merge objects into one, mesh boolean (holes, unions, intersections) with painted colors kept, filament per object or part, per-object settings, closed-solid check. Object ids stay the same while you work.
Arrangingarrange by the real outline seen from above, brim and brim ears included, so shapes nest (Bambu Studio's own arrange uses convex hulls). Gap, rotation steps, one material per plate, calibration corner, align to Y, prime tower corner kept free; one plate, chosen objects or all; "put them in N plates" evenly or as few as possible, and if they do not fit nothing moves and it says what is left over.
Cuttingcut_object on any plane, with connectors like Bambu Studio's Cut tool: a plug (peg and hole with clearance), dowels (holes in both pieces and separate pins) or a dovetail; round, square or hexagonal, straight or tapered, placed automatically or where you say, made shallower where a piece is thin. The pieces are laid out to print: the peg always points up.
ModifiersBox or round parts: modifiers with their own settings ("the top 5 mm at 100 % infill"), negative parts (holes for magnets and screws), support blockers and enforcers.
SettingsRead or change any Bambu Studio setting, per filament slot when it applies, with a warning when a value cannot apply (e.g. a textured-plate temperature on a smooth plate).
PresetsSave the project's changes as Bambu Studio user presets: filament (save_filament_preset), process and printer; or change one of your presets directly (edit_preset), list, rename and delete them, with a backup copy each time. Values are checked and written the way Bambu Studio does (one per nozzle variant where it applies), and changes are stamped for Bambu Studio's cloud sync. Presets that are in your Bambu cloud can only be deleted from Bambu Studio: the answer says how.
Text & logosadd_relief: text or an SVG logo on any face of an object, raised (in another color if you like) or engraved, following curved surfaces too (the surface under it is measured on a fine grid and the shape is wrapped on it, keeping its size along the surface). add_shape('svg'): a logo as an object, on a base in another color. SVG paths, shapes, transforms, fill rules and strokes are read.
Measuringmeasure_object: size and place, each part's volume and surface, the area on the bed, the clearance between the pieces of a print-in-place model, walls thinner than the nozzle line (where and at which height), and the cross-section at any height: how long and thick a bar is, how wide a hole is. measure_between: the gap between two objects or parts, centers, overlap. Dense meshes are measured on a copy within 0.005 mm (2.4 M triangles in about 9 s).
Height ranges & platesset_height_range: settings for a band of an object's height, like Bambu Studio's Height range modifier: 100 % infill at the bottom, finer layers where the details are (variable layer height), another filament for a band (color by height). Variable layer heights and ranges in opened files are kept. set_plate_settings: build plate, print sequence (by object), first-layer filament order, spiral vase and prime tower place per plate.
Paintingpaint_object: colors, supports (or no supports), seams and fuzzy skin on a height band and/or the faces looking one way (top, sides, overhangs...), with sharp edges. Checked on the sliced G-code: a color band changes filament at its edges, painted supports appear where painted.
Purge volumesget_purge_volumes / set_purge_volumes: the purge between each pair of slots and the multiplier, as in Bambu Studio's dialog; the values in opened files are kept.
SlicingBambu Studio command line: time, grams and cost per filament, filament changes, pauses, layers and warnings per plate. Empty plates are skipped.
PreviewsImages of a plate (iso or top, zoom, painted colors, object labels) and of any sliced layer, so the assistant checks its own work.
Print riskscheck_print_risks: tall and narrow parts, parts standing on a tiny or narrow footing without a brim, filaments not meant for the build plate, tall parts sharing a long plate, a full brim on a print-in-place model whose joints it would weld.
Brim earsadd_brim_ears: small round brims only on the thin tips (fingers, toes) of print-in-place and articulated models, placed automatically away from joint gaps and other pieces, or where you say. Bambu Studio's *Painted* brim, checked on the sliced first layer.
Reprintsreprint_objects: a new project with only the parts that failed, same settings, with a brim.
CalibrationTemperature tower, flow rate test (pass 1 and 2), pressure advance tower, max volumetric speed test, retraction test, VFA test (wall speeds), first-layer test, for any filament. Save the result as a Bambu Studio filament preset: a new filament gets its own id, like Bambu Studio's *Create Filament*, so you can pick it for an AMS slot; updating it later keeps that id.
Layer actionsPause at a height (magnets, nuts), filament change at a height, or any G-code at a height.
Printingsend_to_printer makes the print file of a plate and opens it in Bambu Studio (or Bambu Connect) ready to print: you check the AMS mapping and press Print.
Developer Mode (LAN farms)For printers in LAN-only mode with Developer Mode, where Bambu firmware accepts commands from other programs: send_to_printer(via='lan') uploads the plate and starts the print, skip_objects skips parts of the running print, ams_load / ams_unload move filament. Each asks first: the first call sends nothing and gives a code to confirm with. In normal cloud mode the printer refuses them and the answer says so.
Printer statusprinter_status (read only, local network): state, progress, temperatures, AMS trays with humidity, skipped objects, and warnings (unknown spool being fed, sport speed on a long print, a reading that looks old).
Camera & SD cardprinter_camera: a picture of the plate right now, so the assistant sees how the print is going. printer_files / download_printer_file: timelapses (with their last frame) and past print files. delete_printer_files: free space on the SD card, only after you confirm the exact list. Works in cloud mode.

All 87 tools with their parameters: docs/TOOLS.md.

Tested on

Real hardware: macOS, Bambu Studio 2.8.2, a P1S with two AMS units, in normal cloud mode:

  • every tool through a real MCP client, on projects made from scratch and on MakerWorld / Printables downloads (painted 6-color models, multi-part assemblies, 3-plate projects, files from Bambu Studio 1.6 and 1.7);
  • printed: temperature towers and flow tests for two third-party filaments (eSUN PLA Basic black and white), whose presets were made and tuned through the server; the print hand-off to Bambu Studio; live status during prints.

The pressure advance tower, the max volumetric speed test and the retraction test are checked by slicing (the G-code is inspected) but have not been printed yet.

Windows and Linux: on every change to main, CI installs Bambu Studio 2.8.2 (the portable zip on Windows, the AppImage on Debian 13) and runs the whole test suite, slicing and print files included, plus a smoke run. Unit tests run on Windows, macOS and Linux with Python 3.10 and 3.13. On Linux the AppImage takes FFmpeg 7 and WebKitGTK 4.1 from the system (Debian 13, Ubuntu 24.10 or newer); set BAMBU_STUDIO_EXE if Bambu Studio is somewhere else.

Printers: all 14 Bambu Lab printers of Bambu Studio 2.8 go through the MCP from a new project to a print file (A1 mini, A1, A2L, P1P, P1S, P2S, X1, X1 Carbon, X1E, H2S, H2C, H2D, H2D Pro, X2D); only the P1S has printed. The Developer Mode tools were checked against a printer in cloud mode (refused, with the right answer) but never started a print on one in Developer Mode.

Printing and your printer

Bambu firmware (2025 and later) accepts commands from other programs only when the printer is in LAN-only mode with Developer Mode on, which turns off the cloud and Bambu Handy. In normal cloud mode it refuses them, so this server:

  • reads the printer status (allowed in cloud mode), with the LAN access code Bambu Studio already saved;
  • hands the print over to Bambu Studio or Bambu Connect, where you press Print;
  • does not start prints, set AMS slots or skip objects in cloud mode: you do that in Bambu Studio, Bambu Handy or on the printer. For printers in LAN-only mode with Developer Mode (print farms) it can, always after you confirm with the code it gives (see the Develop

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요