프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Diagrid MCP Server

✓ 서비스 회사 · diagrid.io

제작자: diagridio버전 0.0.2i★ 3i클라우드에서 실행공식 사이트 ↗
레지스트리 이름io.diagrid/mcp

설치 방법

What it does

Build and operate Dapr Workflows and Durable Agents on Diagrid. Sign-in required.

  • Connects 클라우드에서 실행
  • Account or key Sign in to the service when you connect (OAuth)
  • Category 기타

이 순위인 이유

이 항목은 “AI와 연결되는 앱” 탭에 있으며, 이 탭은 별 없이 다음 순서로 정렬합니다

1. Claude 커넥터 디렉터리에 있음아니요
2. 팀이 직접 써 봄아니요
3. 태국 사용자에게 맞음아니요
4. 별을 뺀 사용량20/100인기 0 · 최신성 12 · 응답 중 8 · 사용자 좋아요 +0
5. 등록일2026-11-17

사용자 좋아요: 0 · 순위에 최대 5점(1인 1점) 더해지며 돈으로 살 수 없습니다.

품질: 기본 점검 4/4개 통과(표시만, 정렬에는 안 씀)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Diagrid MCP Server 설치해 줘. https://mcp.popnx.com/i/diagrid-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 4/4 통과 · 내가 묻는 내용은 제작자 서버(mcp.cloud.r1.diagrid.io)를 거쳐요 · ✓ 명령 확인 2026년 11월 17일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있어요 · 약 2분

키 필요 없음, 설치 필요 없음 · claude.ai나 데스크톱 앱에서 한 번 설정하면 채팅에서 쓸 수 있어요 · 무료 계정은 1개까지 · Team/Enterprise는 소유자(Owner)가 추가

  1. Claude의 Connectors 페이지 열기

    CustomizeConnectors

    CustomizeConnectors1Add2https://…3Add4
  2. “Add” → “Custom” → “Web”를 누르고 이 2칸 채우기

    여기서 복사해 Claude의 같은 이름 칸에 붙여 넣고 Continue를 누르세요

    Name · 이름Diagrid MCP Server
    Remote MCP server URL · 주소https://mcp.cloud.r1.diagrid.io/mcp

    Claude가 찾은 로그인 설정 화면에서 Continue를 누르고 · Authentication은 제작자 안내대로(Sign in now, Sign in when needed, No sign in) 고른 뒤 Add를 누르세요

  3. 채팅에서 켜기

    +ConnectorsDiagrid MCP Server

  4. 해 보기

    Diagrid MCP Server을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Diagrid MCP Server을 쓰고 있다고 하거나 답에 Diagrid MCP Server 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT 연결은 요금제에 따라 달라요

전체 MCP: 웹 ChatGPT Business, Enterprise, Edu · Pro: 읽기/가져오기 권한으로 연결, 데이터를 바꾸는 도구는 안 될 수 있어요 · Plus: 공식 문서 미확인, 플러그인 화면에 사용자 지정 MCP 추가 항목이 보이면 시도해 볼 수 있어요 · 웹만

  1. 웹 ChatGPT에서 MCP 추가 페이지 열기

    Plugins+Add custom MCP server

    ChatGPTPlugins1+2https://…3Create4
  2. 이름과 주소 입력

    이름을 넣고 Connection에 주소를 붙여 넣은 뒤 경고에 체크하고 Create as a plugin을 누르세요

    Name · 이름Diagrid MCP Server
    Connection · 주소https://mcp.cloud.r1.diagrid.io/mcp
  3. 채팅에서 Diagrid MCP Server 고르기

    새 채팅을 열고 입력 전에 플러그인 목록에서 Diagrid MCP Server을 고르세요

  4. 해 보기

    Diagrid MCP Server을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ ChatGPT가 Diagrid MCP Server을 쓰고 있다고 하거나 답에 Diagrid MCP Server 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 OpenAI 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Claude Code에 연결할 수 있어요 · 약 2분

키 필요 없음, 설치 필요 없음

  1. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  2. 이 명령을 붙여 넣고 Enter

    claude mcp add --transport http --scope user diagrid https://mcp.cloud.r1.diagrid.io/mcp
  3. Claude Code에서 /mcp 입력

    Diagrid MCP Server이 목록에 있고 연결됨으로 보이면 돼요

  4. 해 보기

    Diagrid MCP Server을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Diagrid MCP Server을 쓰고 있다고 하거나 답에 Diagrid MCP Server 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있어요 · 약 2분

키 필요 없음, 설치 필요 없음

  1. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  2. Cursor에서 AI 채팅을 Agent 모드로 열기

  3. 해 보기

    Diagrid MCP Server을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Diagrid MCP Server을 쓰고 있다고 하거나 답에 Diagrid MCP Server 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있어요 · 약 2분

키 필요 없음, 설치 필요 없음

  1. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  2. VS Code에서 AI 채팅을 Agent 모드로 열기

  3. 해 보기

    Diagrid MCP Server을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Diagrid MCP Server을 쓰고 있다고 하거나 답에 Diagrid MCP Server 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

웹으로 연결하는 앱용 주소

주소https://mcp.cloud.r1.diagrid.io/mcp

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Diagrid MCP Server을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

웹으로 연결

Claude Code

claude mcp add --transport http --scope user diagrid https://mcp.cloud.r1.diagrid.io/mcp

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "diagrid": {
      "url": "https://mcp.cloud.r1.diagrid.io/mcp"
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "diagrid": {
      "type": "http",
      "url": "https://mcp.cloud.r1.diagrid.io/mcp"
    }
  }
}

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
npm/PyPI에 없음
확인된 도메인
✓ diagrid.io
라이선스i
Apache-2.0
연결 방식
클라우드에서 실행
전송 방식
streamable-http
최신 버전i
0.0.2
카테고리i
기타
레지스트리 공개i
2026년 11월 17일
코드 마지막 변경i
2026년 11월 19일
마지막 확인
2026년 11월 19일
제작자
diagridio
웹사이트
diagrid.io
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

인터넷으로 연결하는 앱

ClaudeChatGPTGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatOpen WebUIRaycast

모든 앱과 장단점 →

할 수 있는 일

서버가 도구 목록을 보여 주기 전에 로그인을 요구해요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 diagrid.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 어제

  • – 해당 없음

    라이선스 있음

    해당 없음: diagrid.io 소유자가 직접 운영하는 클라우드 서버라 저장소 코드를 실행하지 않아요

  • ✓ 통과

    엔드포인트 응답

    472ms 만에 응답(HTTP 401)

  • ✓ 통과

    OAuth로 로그인

    OAuth 로그인을 지원한다고 밝혀서, AI 앱이 로그인 화면으로 안내해 줘요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    아직 점검하지 않았어요. 엔드포인트를 점검할 때 도구 목록을 읽어요

클라우드 주소가 최근 3번 중 3번 응답 · 최근 472 ms · 확인 2026년 11월 19일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/diagrid-mcp.svg)](https://mcp.popnx.com/en/servers/diagrid-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 20815개 중 93%보다 스타가 많아요
  • 이 카테고리의 다른 서버 20815개 중 94%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 20815개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Diagrid MCP Server, 안전한가요?

해당하는 기본 점검 4개 중 4개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(0.0.2)은 3일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되므로 원격 MCP를 받는 앱에서도 쓸 수 있어요. 예: 웹 ChatGPT(Business 이상은 전체 MCP, Pro는 읽기 전용).

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

제작자: koala73널리 사용됨★ 9.1만4일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

제작자: openstatusHQ널리 사용됨★ 9.3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

제작자: Klavis-AI성장 중★ 5.8천14개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

제작자: jitsucom널리 사용됨★ 5.1천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · jitsu.com
비슷한 항목과 비교
이 항목
Diagrid MCP Server
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
실행 위치클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검4/44/44/44/41/44/4
라이선스Apache-2.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

diagrid-ai

Build and operate apps on Diagrid (formerly Diagrid Catalyst) by prompting — Dapr Workflows, Durable Agents, and the running system.

Verified end to end in Claude Code — installs in under 5 seconds, every skill registers, and a real Diagrid question fires the right skill and gets a grounded answer. In Codex and GitHub Copilot the install and every skill are verified, and Codex is confirmed to put them in front of the model; neither has yet answered a Diagrid question here, for reasons that are nothing to do with the skills.

Early release. The skills drive Diagrid through the remote Diagrid MCP server:

you add the server and sign in once. The one exception is an app tunnel, which lets

Diagrid call into a process on your machine. No MCP tool opens one, so

diagrid-app-tunnels installs the Diagrid CLI and uses it for that alone. Read What works today for what is and is not available

over MCP yet.

Install

Claude Code
claude plugin marketplace add diagridio/diagrid-ai

claude plugin install diagrid@diagrid

If you installed catalyst-ai@diagrid before, that is this plugin under its old name. See Moving from catalyst-ai.

This repo used to be diagridio/catalyst-ai. GitHub redirects the old name, so a marketplace you added from it keeps updating, and you don't need to add it again.

Then check it landed — both commands, not just the second:

claude plugin list                           # expect Version: 0.10.0 or later

claude plugin details diagrid@diagrid # expect 12 skills

list reports the version you actually have. details reports the version the marketplace is offering, reading the installed copy only when the two agree — so on its own it can show you 12 skills while your session loads 11. If either looks wrong, jump to If your install is behind.

The same marketplace also lists dapr-skills, for Dapr applications that run outside Diagrid — see Also in this marketplace.

Then sign in to the Diagrid MCP server

The plugin also registers the Diagrid MCP server, https://mcp.cloud.r1.diagrid.io/mcp. It stays empty until you sign in once. In Claude Code, run /mcp, pick plugin:diagrid:diagrid and complete the browser sign-in. There is no API key. If you are upgrading from 0.8.x, see Upgrading from 0.8.x.

If you already added the server yourself with claude mcp add, remove that entry (claude mcp remove catalyst --scope user) once the plugin is installed. Otherwise you have two copies of every Diagrid tool.

The plugin requests the scopes catalyst:read catalyst:write offline_access. Without offline_access there is no refresh token, so you sign in again each time the session expires. Write tools, such as diagrid_apply, are left out of the tool list entirely when your role is read-only or the sign-in did not grant write scope. If they are missing, sign in again and approve write access; if they are still missing, your role is read-only.

Check it worked by asking: *"Who am I in Diagrid?"* The answer comes from diagrid_whoami.

Connect other clients to the remote MCP server

Every client connects to the same remote server, https://mcp.cloud.r1.diagrid.io/mcp (the r1 is required), and signs in with OAuth in the browser. The authorization server does not accept dynamic registration, so a client that tries to register itself fails. Each client below uses its registered client ID instead: codex, copilot-cli, vscode, claude-code, or claude-web for claude.ai. VS Code and the Copilot CLI can also sign in without one, because the server reads the client metadata they publish.

Each snippet below also sets an X-Diagrid-Plugin-Version header to the plugin version, which lets the server see which version of these instructions a client was set up from. It goes only on the MCP requests the client already makes. When you update the skills, update the header to match. If you set up a client for 0.8.x, the header's name changed as well. See Upgrading from 0.8.x.

Install the skills for the client first (below), then:

Codex

codex mcp add diagrid --url https://mcp.cloud.r1.diagrid.io/mcp --oauth-client-id codex

codex mcp login diagrid

codex mcp add has no header flag, so add this to ~/.codex/config.toml under the server it just wrote:

[mcp_servers.diagrid.http_headers]

X-Diagrid-Plugin-Version = "0.10.2"

GitHub Copilot CLI

copilot mcp add has no client-ID flag, so add the server and then set oauthClientId in ~/.copilot/mcp-config.json:

{

"mcpServers": { "diagrid": { "type": "http", "url": "https://mcp.cloud.r1.diagrid.io/mcp", "headers": { "X-Diagrid-Plugin-Version": "0.10.2" }, "oauthClientId": "copilot-cli", "tools": ["*"] } } }

Then run /mcp inside Copilot and authenticate the server in the browser.

VS Code (Copilot Chat), in .vscode/mcp.json or your user MCP configuration:

{

"servers": { "diagrid": { "type": "http", "url": "https://mcp.cloud.r1.diagrid.io/mcp", "headers": { "X-Diagrid-Plugin-Version": "0.10.2" }, "oauth": { "clientId": "vscode" } } } }

VS Code opens a browser for authorization on the first connection. See the VS Code MCP configuration reference.

claude.ai and Claude Desktop: in claude.ai, open Settings → Connectors → Add custom connector, enter the URL above, and under Advanced settings set the OAuth client ID to claude-web. Then Connect and sign in. Claude Desktop uses the connectors of the same account. Without the client ID, the connector tries to register itself and the sign-in fails. Custom connectors cannot set request headers, so this one sends no X-Diagrid-Plugin-Version. This route gives you the MCP tools only; the skills need a client from Install. Verified on claude.ai on 2026-10-29: the connector signed in and the chat could say who was signed in to Diagrid. Claude Desktop shares those connectors but has not been tried separately.

Anything else (Gemini CLI, Zed, Antigravity and so on): add the URL as a remote (streamable HTTP) MCP server in that client's own MCP setup and use its MCP sign-in.

The server is also listed in the official MCP Registry as io.diagrid/mcp (search the registry), so clients with a registry-backed server gallery can find it there. The earlier entry, io.diagrid/catalyst, points at the same URL and is superseded by io.diagrid/mcp.

Moving from catalyst-ai

0.10.0 renamed the plugin from catalyst-ai to diagrid. Claude Code treats a renamed plugin as a new one, so claude plugin update does not move you across. The catalyst-ai entry stays in the marketplace, held at its final release, 0.9.1. That release still works, gets no new skills, and at the start of every session shows these steps as one command, with a reminder to sign in again through /mcp.

claude plugin marketplace update diagrid

claude plugin install diagrid@diagrid claude plugin uninstall catalyst-ai@diagrid

Uninstall the old plugin. With both installed, every skill and every tool shows up twice. Then run /mcp, and if plugin:diagrid:diagrid shows it needs authentication, pick it and sign in. The commands are now /diagrid:try-workflow and /diagrid:try-agent, and the skills are diagrid:diagrid-deploy, diagrid:diagrid-setup and so on.

In Codex, Copilot and the other clients that install with npx skills add, run your client's install command below again. It adds the diagrid-* skills but leaves the old catalyst-* folders in place, so the agent sees every skill twice until you delete them from the directory the installer wrote:

rm -rf .agents/skills/catalyst-*        # a per-project install

rm -rf ~/.copilot/skills/catalyst-* # a Copilot install with --global

Upgrading from 0.8.x

0.9.0 renamed two things. A client set up for 0.8.x needs both of them changed.

  • The header. The server chooses tool names by the header a request sends. A request that still sends the old X-Catalyst-Plugin-Version header gets the old catalyst_* tool names. The 0.9.0 skills call only diagrid_* tools, so every call they make fails as an unknown tool. Updating the version number on the old header does not fix this. Replace the header itself with X-Diagrid-Plugin-Version, set to the current version:
  • Codex: in ~/.codex/config.toml, find the http_headers table under your Catalyst server and change the key to X-Diagrid-Plugin-Version.
  • Copilot CLI (~/.copilot/mcp-config.json) and VS Code (mcp.json): change the key in that server's headers.

You can also remove the old entry and add the server again from the snippets above.

  • The server name in Claude Code. 0.9.0 registered the server as plugin:catalyst-ai:diagrid, and 0.10.0 renamed the plugin itself. Follow Moving from catalyst-ai.

To check, ask *"Who am I in Diagrid?"* The answer should come from diagrid_whoami.

GitHub Copilot CLI
npx -y skills add diagridio/diagrid-ai --agent github-copilot --skill '*' --global --yes

Use repeated `--agent` flags if you pass more than one. The comma form (-a codex,github-copilot) is what the upstream README documents, and it prints Invalid agents:, installs nothing and exits 1 — so it fails honestly, and a step checking the exit code catches it. Re-measured on 1.5.22 and 1.5.23; an earlier version of this line claimed exit 0, which was a measurement error.

The failure that *is* silent is a missing -y where nothing can answer the prompt, which is every CI runner: it prints Done!, installs zero skills, and exits 0. Pass -y, and assert a skill count rather than an exit code.

--global writes all twelve skills to ~/.copilot/skills/. Copilot should read them in every project from there. Not yet verified: we have checked only that the installer writes that directory, not that Copilot loads skills from it. Check that Copilot sees them:

copilot skill list        # expect all 12

If it shows none, run the per-project command (without --global) from the repository root.

Without --global the skills go into .agents/skills/ under the folder you ran the command in. Copilot reads project skills only at the root of the repository it is working in, so an install from a subfolder, or from a folder Copilot does not treat as that root, leaves it with no skills and no error. Don't rely on npx skills list for this — its "Agents:" line only names agents it detects as installed on your machine, so it will quietly leave out a client you haven't installed yet.

Gemini CLI, Zed and Antigravity

These read the shared .agents/skills/ project directory, not ~/.copilot/skills/, so install per project, from your repository's root:

npx -y skills add diagridio/diagrid-ai --agent github-copilot --skill '*' --yes

Without --global, the github-copilot target writes that shared directory.

VS Code (Copilot Chat)

Not yet verified: we have not checked whether VS Code Copilot Chat reads skills from ~/.copilot/skills/, from .agents/skills/ at the workspace root, or both. Until then, run the per-project command above from your workspace root, which writes .agents/skills/.

Codex
npx -y skills add diagridio/diagrid-ai --agent codex --skill '*' --yes

.agents/skills/ is Codex's project skills directory too — the installer maps codex there by design, so seeing no .codex/ create

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요