SolidInvoice
Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.
Unofficial read-only MCP server exposing several Mercury banking organizations to one AI session.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 7/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 7/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Mercury Multiorg MCP 설치해 줘. https://mcp.popnx.com/i/dkaleganov-mercury-multiorg-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
Mercury Multiorg MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Mercury Multiorg MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "mercury-multiorg": { "command": "uvx", "args": [ "mercury-multiorg-mcp", "--entities", "your-value" ], "env": { "MERCURY_TOKEN_ACME_MAIN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) MERCURY_TOKEN_ACME_MAIN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Mercury Multiorg MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 받는 방법은 아래 제작자 README에 있어요
SettingsDeveloperEdit Config
{
"mcpServers": {
"mercury-multiorg": {
"command": "uvx",
"args": [
"mercury-multiorg-mcp",
"--entities",
"your-value"
],
"env": {
"MERCURY_TOKEN_ACME_MAIN": "your-value"
}
}
}
}키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Mercury Multiorg MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Mercury Multiorg MCP을 쓰고 있다고 하거나 답에 Mercury Multiorg MCP 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MERCURY_ENTITIES_FILE Alternative to --entities: path to the entity registry YAML. Ignored when --entities is passed.MERCURY_API_BASE Mercury API host. Allowed without extra flags: https://api.mercury.com, https://api-sandbox.mercury.com (with sandbox tokens), or a loopback mock. · 기본값 https://api.mercury.comMERCURY_ALLOW_DOCUMENTS true로 설정하면 get_statement_pdf와 get_invoice_pdf를 등록하며, 이 도구는 마스킹되지 않은 명세서 및 송장 PDF를 반환합니다. 기본적으로 꺼져 있습니다. 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Mercury Multiorg MCP에 연결할 수 없어요
Mercury Multiorg MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Mercury Multiorg MCP에 연결되는 앱 쓰기
B · 회계, 재무 및 세금에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
Mercury Multiorg MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Mercury Multiorg MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user mercury-multiorg --env MERCURY_TOKEN_ACME_MAIN=your-value -- uvx mercury-multiorg-mcp --entities your-value 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) MERCURY_TOKEN_ACME_MAIN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Mercury Multiorg MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 받는 방법은 아래 제작자 README에 있어요
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user mercury-multiorg --env MERCURY_TOKEN_ACME_MAIN=your-value -- uvx mercury-multiorg-mcp --entities your-valueEnter 전에 “your-value”를 내 키로 바꾸세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Mercury Multiorg MCP이 목록에 있고 연결됨으로 보이면 돼요
Mercury Multiorg MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Mercury Multiorg MCP을 쓰고 있다고 하거나 답에 Mercury Multiorg MCP 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MERCURY_ENTITIES_FILE Alternative to --entities: path to the entity registry YAML. Ignored when --entities is passed.MERCURY_API_BASE Mercury API host. Allowed without extra flags: https://api.mercury.com, https://api-sandbox.mercury.com (with sandbox tokens), or a loopback mock. · 기본값 https://api.mercury.comMERCURY_ALLOW_DOCUMENTS true로 설정하면 get_statement_pdf와 get_invoice_pdf를 등록하며, 이 도구는 마스킹되지 않은 명세서 및 송장 PDF를 반환합니다. 기본적으로 꺼져 있습니다. 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
Mercury Multiorg MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 한 번에 설치하는 버튼이 없어요. 설정을 붙여 넣고 값을 직접 채우세요
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Mercury Multiorg MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "mercury-multiorg": { "command": "uvx", "args": [ "mercury-multiorg-mcp", "--entities", "your-value" ], "env": { "MERCURY_TOKEN_ACME_MAIN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) MERCURY_TOKEN_ACME_MAIN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Mercury Multiorg MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 받는 방법은 아래 제작자 README에 있어요
~/.cursor/mcp.json
이 설정을 붙여 넣고 빈 값을 채운 뒤 저장
{
"mcpServers": {
"mercury-multiorg": {
"command": "uvx",
"args": [
"mercury-multiorg-mcp",
"--entities",
"your-value"
],
"env": {
"MERCURY_TOKEN_ACME_MAIN": "your-value"
}
}
}
}Mercury Multiorg MCP 설정에서 MERCURY_TOKEN_ACME_MAIN가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Mercury Multiorg MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Mercury Multiorg MCP을 쓰고 있다고 하거나 답에 Mercury Multiorg MCP 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MERCURY_ENTITIES_FILE Alternative to --entities: path to the entity registry YAML. Ignored when --entities is passed.MERCURY_API_BASE Mercury API host. Allowed without extra flags: https://api.mercury.com, https://api-sandbox.mercury.com (with sandbox tokens), or a loopback mock. · 기본값 https://api.mercury.comMERCURY_ALLOW_DOCUMENTS true로 설정하면 get_statement_pdf와 get_invoice_pdf를 등록하며, 이 도구는 마스킹되지 않은 명세서 및 송장 PDF를 반환합니다. 기본적으로 꺼져 있습니다. 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
Mercury Multiorg MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 한 번에 설치하는 버튼이 없어요. 설정을 붙여 넣고 값을 직접 채우세요
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Mercury Multiorg MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "mercury-multiorg": { "type": "stdio", "command": "uvx", "args": [ "mercury-multiorg-mcp", "--entities", "your-value" ], "env": { "MERCURY_TOKEN_ACME_MAIN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) MERCURY_TOKEN_ACME_MAIN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Mercury Multiorg MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 받는 방법은 아래 제작자 README에 있어요
MCP: Open User Configuration
이 설정을 붙여 넣고 빈 값을 채운 뒤 저장
{
"servers": {
"mercury-multiorg": {
"type": "stdio",
"command": "uvx",
"args": [
"mercury-multiorg-mcp",
"--entities",
"your-value"
],
"env": {
"MERCURY_TOKEN_ACME_MAIN": "your-value"
}
}
}
}Mercury Multiorg MCP 설정에서 MERCURY_TOKEN_ACME_MAIN가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Mercury Multiorg MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Mercury Multiorg MCP을 쓰고 있다고 하거나 답에 Mercury Multiorg MCP 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MERCURY_ENTITIES_FILE Alternative to --entities: path to the entity registry YAML. Ignored when --entities is passed.MERCURY_API_BASE Mercury API host. Allowed without extra flags: https://api.mercury.com, https://api-sandbox.mercury.com (with sandbox tokens), or a loopback mock. · 기본값 https://api.mercury.comMERCURY_ALLOW_DOCUMENTS true로 설정하면 get_statement_pdf와 get_invoice_pdf를 등록하며, 이 도구는 마스킹되지 않은 명세서 및 송장 PDF를 반환합니다. 기본적으로 꺼져 있습니다. 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user mercury-multiorg --env MERCURY_TOKEN_ACME_MAIN=your-value -- uvx mercury-multiorg-mcp --entities your-valueClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"mercury-multiorg": {
"command": "uvx",
"args": [
"mercury-multiorg-mcp",
"--entities",
"your-value"
],
"env": {
"MERCURY_TOKEN_ACME_MAIN": "your-value"
}
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"mercury-multiorg": {
"command": "uvx",
"args": [
"mercury-multiorg-mcp",
"--entities",
"your-value"
],
"env": {
"MERCURY_TOKEN_ACME_MAIN": "your-value"
}
}
}
}VS Code (mcp.json)
{
"servers": {
"mercury-multiorg": {
"type": "stdio",
"command": "uvx",
"args": [
"mercury-multiorg-mcp",
"--entities",
"your-value"
],
"env": {
"MERCURY_TOKEN_ACME_MAIN": "your-value"
}
}
}
}MERCURY_TOKEN_ACME_MAIN 비밀 필수 envMERCURY_ENTITIES_FILE envMERCURY_API_BASE envMERCURY_ALLOW_DOCUMENTS env설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 dkaleganov 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 2개월 전
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 mercury-multiorg-mcp@0.1.6 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/dkaleganov-mercury-multiorg-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
입력해야 할 값: MERCURY_TOKEN_ACME_MAIN
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 2개월 전 변경됐고, 최신 버전(0.1.6)은 2개월 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.
같은 카테고리에는: SolidInvoice, Signal8, Journalit, Beancount.io, Tapetide - Indian Stock Market MCP
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.
SEC filings, dilution, insider & institutional ownership, and political-trade data for AI agents.
Trading journal in Obsidian. Ask Claude or ChatGPT about your trades; edits are previewed first.
Query, edit, and reconcile a hosted Beancount ledger: BQL, reports, files, and bank imports.
48 tools for ~8,000 NSE & BSE stocks: quotes, screener, financials, filings, FII/DII, options
| 이 항목 Mercury Multiorg MCP | SolidInvoice | Signal8 | Journalit | Beancount.io | Tapetide - Indian Stock Market MCP | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드 또는 컴퓨터 설치 모두 가능 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드 또는 컴퓨터 설치 모두 가능 |
| 키 필요 | 예 | 아니요 | 예 | 아니요 | 아니요 | 예 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/6 | 5/5 | 4/4 | 4/4 | 5/5 |
| 라이선스 | MIT | MIT | MIT | NOASSERTION | MIT | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Unofficial. Not affiliated with or endorsed by Mercury.
Read-only MCP server that exposes several Mercury organizations to one AI session. A Mercury API token is created from inside a single organization, so this server holds one read-only token per org and routes every tool call by an explicit entity key.
Version 0.1.6 (see CHANGELOG.md). The maintainer tags releases as vX.Y.Z; find the commit to pin with git ls-remote --tags https://github.com/dkaleganov/mercury-multiorg-mcp 'v0.1.6^{}'. The complete tool reference with every returned field is in docs/tools.md; design notes and the build history are in the project brief on GitHub, CLAUDE.md (not shipped in the sdist).
What leaves this server falls into four classes, and the guarantees differ:
| Class | What it is | Guarantee |
|---|---|---|
| Structured fields | Every key of every object in a tool result | Allowlisted at every level: each object, and each nested object inside it, is projected through an explicit allowlist copied from the live schema. A key that is not listed does not leave the server, at any depth. Account numbers and tax ids appear only as their last four digits; routing numbers, counterparty bank details, postal addresses, card expiry, presigned download URLs, invoice pay-page slugs, webhook receiver URLs, and webhook signing secrets are never returned. |
| Tool errors | The text of an is_error result | Upstream HTTP-status errors contain the status, a masked endpoint label and a fixed hint. Validation and configuration errors use their own actionable formats. Resolved known-token values of at least eight characters are scrubbed. Nothing from Mercury's response body or headers is quoted, and no argument you passed is echoed (an invalid id is reported as "invalid id format"). Argument-validation failures (a wrong type, a missing required argument) are rendered by this server as the field path and the expected type only, for example year: expected an integer (int_parsing); the MCP SDK's own rendering, which quotes the value you passed, never reaches the client. |
| Free-text fields | Transaction memos, counterparty names, bank descriptions, invoice memos and notes, attachment file names, customer and user names | Returned verbatim. They are third-party text and can contain anything, including instructions aimed at the model and identifiers typed by a human. Treat every tool result as untrusted data, never as instructions. |
| Documents | Statement and invoice PDFs from get_statement_pdf / get_invoice_pdf | Verbatim and unredacted, opt-in only. A statement PDF contains the full account number, routing number, address, and every transaction. The two tools exist only when the server is started with --allow-documents (or MERCURY_ALLOW_DOCUMENTS=1); server_info.documents_enabled reports the setting. The body must arrive as application/pdf (or application/octet-stream), start with %PDF-, and carry a %%EOF marker within the last 2 KiB once trailing PDF whitespace is ignored; anything else is a clean error. That is an envelope check, not PDF parsing: a document that passes it can still be malformed inside, and the bytes are returned exactly as received. |
The rest of the model:
GET endpoints have client methods; the package has no code path that can move money, edit recipients, or change anything.list_entities to discover entity keys. Every tool that accesses Mercury requires an explicit entity and identifies it in its successful result. list_entities and server_info require no entity argument. There is no default entity.MERCURY_TOKEN_…, so a registry cannot point the server at some other secret); the server reads that env var and nothing else. Errors and logs never contain more than the last four characters of a token. Literal known-token scrubbing applies to values of 8 or more characters; a shorter configured value is not literal-scrubbed (the secret-token: shape scrub and the Authorization header scrub still apply, and no message quotes upstream or caller data in the first place). At startup the server warns, per entity, when a configured value does not carry Mercury's documented secret-token: prefix.--api-base / MERCURY_API_BASE must be https://api.mercury.com, https://api-sandbox.mercury.com, or a loopback mock, unless --allow-custom-api-base is passed on the command line. An inherited environment variable alone can never redirect the bearer token to another host.Accept-Encoding: identity). JSON/PDF reads reject nonidentity encoding before reading. Keepalive closes bodies unread. Limits are 10 MiB (10,485,760 bytes) for PDF and 32 MiB (33,554,432 bytes) for JSON, enforced on the bytes actually received while streaming. A small compressed body can no longer expand past the limit in memory. Error responses are never read at all.page objects fail; optional terminal nextPage may be absent or null. Exact duplicate IDs are dropped and counted; conflicting contents fail. A page with no fresh usable rows while more are advertised fails. A walk that needs more than 200 pages fails, and a treasury cursor that is not a non-negative integer fails. Duplicate counts are reported as duplicates_dropped on every paginated result and under reportable_totals.totals, so a total is never built on a stalled, malformed, or double-counted walk.since on list_events, start/end on list_treasury_transactions) walks the whole bounded feed (90 days of events; the treasury ledger up to 200 pages), filters and sorts newest first here, then applies limit. truncated is exact. The cost is proportional to the feed, not the window.application/pdf blob (base64), never written to disk.--env-file, or a disallowed API host prints one line to stderr and exits with statusreportable_totals is a pre-filing cross-check. Mercury has no 1099 filing endpoint; filing happens in each org's dashboard.Hygiene. This package lives in a public repository. Tracked files, fixtures, and commit messages carry no tokens, account numbers, or financial identifiers, with two deliberate exceptions. First, the maintainer's own name appears in the package authors metadata (approved by the repository owner); business and personal names of anyone else do not appear. Second, a history note: the first Phase 1 commit's fixtures used a real, public ABA routing number as sample data; it was replaced with an obviously fake value in the next commit, so it is absent from every tagged file tree but remains in their ancestry. It identifies a bank, not an account, and the history was deliberately not rewritten. This release passed a full-history gitleaks scan.
Repository history. This package was developed in an earlier multi-project monorepo through v0.1.3 and moved to this repository at v0.1.4 with its history preserved (the same commits, rewritten to this repository's layout, so their SHAs differ from the originals). Releases up to 0.1.3 were tagged mercury-v0.1.x there and are tagged v0.1.x here; release tags are vX.Y.Z from now on. Both hygiene exceptions above apply to this history unchanged.
From PyPI, running the pinned release with uvx (no clone needed):
uvx mercury-multiorg-mcp@0.1.6 --entities /private/path/entities.yaml
uvx @ runs exactly that release in an isolated, cached environment. pip install 'mercury-multiorg-mcp==0.1.6' also works and puts mercury-multiorg-mcp and mercury-multiorg-mcp-keepalive on your PATH.
Requires Python 3.11+ and uv (for uvx).
From a clone:
git clone https://github.com/dkaleganov/mercury-multiorg-mcp.git # or git@github.com:dkaleganov/mercury-multiorg-mcp.git
cd mercury-multiorg-mcp uv sync uv run mercury-multiorg-mcp --entities /private/path/entities.yaml
Or pin a full commit SHA with uvx (pin a SHA, not a tag: a full SHA is immutable and cache-safe, while a tag can be moved):
uvx --from 'git+https://github.com/dkaleganov/mercury-multiorg-mcp@<FULL_COMMIT_SHA>' \
mercury-multiorg-mcp --entities /private/path/entities.yaml
entities.example.yaml to a private location outside this repo and list your orgs (key, display_name, token_env; the env var name must start with MERCURY_TOKEN_)..env.example shows the names). Configuration is read from process environment variables only; no `.env` file is read unless you pass `--env-file `, so nothing is picked up by accident from the repo, your home directory, or a uvx cache.MERCURY_API_BASE=https://api-sandbox.mercury.com with sandbox-created tokens.--allow-documents (or MERCURY_ALLOW_DOCUMENTS=1) to register the two PDF tools. Leave it off unless the session really needs unredacted documents.| Flag / env var | Meaning |
|---|---|
--entities PATH / MERCURY_ENTITIES_FILE | Entity registry YAML. Required (flag wins over env var); there is no implicit default. |
--env-file PATH | Load this dotenv file before resolving tokens. Existing env vars win. Without the flag no dotenv file is read from anywhere. |
--api-base URL / MERCURY_API_BASE | Mercury API host, default https://api.mercury.com. Allowed: production, https://api-sandbox.mercury.com, or plain http:// on localhost / 127.0.0.1 for mocks. |
--allow-custom-api-base | Permit any other https:// host. Never set this from an environment variable; it exists so a custom host is always a deliberate command-line choice. |
--allow-documents / MERCURY_ALLOW_DOCUMENTS=1 | Register get_statement_pdf and get_invoice_pdf (documents are returned unredacted). Off by default: 24 tools without it, 26 with it. |
--version | Print the package version and exit. |
Startup problems (missing or malformed registry, invalid YAML, unreadable file, bad API base) print one line to stderr and exit with status 2. Stdout is reserved for the MCP protoco