프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Arena

제작자: dravensoft-dev버전 13.0.0i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.dravensoft-dev/arena

설치

개요

제작자가 쓴 설명(영어 원문)

Arena by Dravensoft over MCP: the router, the references and every component document.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 문서, 시트 및 사무 업무

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • npmNode.js 설치(npx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "arena": {
      "command": "npx",
      "args": [
        "-y",
        "@dravensoft/arena-mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add arena -- npx -y @dravensoft/arena-mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "arena": {
      "command": "npx",
      "args": [
        "-y",
        "@dravensoft/arena-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "arena": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@dravensoft/arena-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 dravensoft-dev 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

문서, 시트 및 사무 업무 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 2170개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 2170개 중 72%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 2170개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Arena, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(13.0.0)은 12일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Agent-Native Calendar, Excel MCP Server, MCP Server for Excel

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Agent-Native Calendar

제작자: BuilderIO

Agent-Native Google Calendar - manage events, sync, and public booking

클라우드에서 실행★ 7,620MIT2개월 전 업데이트
설치

Excel MCP Server

제작자: haris-musa

Create and edit Excel files with AI: charts, PivotTables, formulas. No Excel needed.

내 컴퓨터에서 실행★ 4,276MIT6일 전 업데이트
설치

MCP Server for Excel

제작자: sbroenne

Excel automation for AI - Sheets, Power Query, DAX, VBA, Tables, Ranges and more. Windows only.

내 컴퓨터에서 실행★ 847MIT3일 전 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Arena by Dravensoft

One design system, in React and in Angular, from one contract.

MIT License · Token-driven design system for React, Angular and Tailwind.

What you get

Components with a contracted API. The same components under both framework names, rendering the same pixels, over one shared Tailwind layer. What a member is called, what it takes, what it defaults to and what it means are written in contracts/api/, and each layer's types and tables are generated from there, so the two layers cannot drift apart quietly. Every value a component draws resolves through a design token, so no hex and no bare pixel sits anywhere inside one.

Accessibility bound per component instead of audited per release. Each component declares which pattern it implements, most of them from the WAI-ARIA Authoring Practices: the roles it carries, the keys it answers, where focus lands, what dismisses it. A requirement it does not meet yet is recorded beside it with its reason, and bun run check:behaviour fails on the day a component stops answering the pattern it named.

A style kernel, which is what a project answers to look like itself. The questions about shape, space, weight and depth are Arena's; the answers are a style plugin the project writes, and the appearance Arena installs with is one such plugin rather than a floor under them. Palettes and fonts sit in an arena.config.json, which the arena command each package ships turns into the one stylesheet a package cannot carry: Arena carries the language and never the skin, and none of its own colours reach your build. A project that starts from an existing look takes a row of plugin-style-store/catalogue/INDEX.md: the catalogue lists style plugins measured on real products, one row each.

Metadata for a product that has to be found, which most products do not. The Angular layer writes the document from the routes it is handed, at @dravensoft/arena-angular/metadata: title composition, a description, a canonical and the og:* pair, with no route indexed until it says so. That import path is a second entry point, so a project that never asks for metadata never installs the router behind it. React writes no at all, and both layers publish the breadcrumb trail they draw in schema.org terms.

Why an agent can operate it

An API is a contract file rather than a paragraph, and so is the pattern a component binds and the role a style plugin answers; a gate holds the code, the documentation and the published packages to them. An agent handed this repository does not guess at Arena: it reads the contract that governs what it is about to write, and the gate tells it when it got it wrong.

That is also what makes the rules enforceable rather than aspirational. Each of these is decided in contracts/design/AGENTS.md and handed to a builder by skills/design/SKILL.md, which states each one in full and says which of them a gate reads your own sources for.

  • Tokens are the only styling layer.
  • Only a class of the vocabulary goes on an Arena component.
  • Appearance is a class of the vocabulary, never a member.
  • Danger is outline, never filled.
  • One primary accent per view.
  • No gradients, on any surface.
  • No emoji, in product or in copy.
  • Icons are Phosphor class-name strings, drawn by Arena's components or by ArenaIcon; a raw ph-* element paints nothing.
  • Never wrap an Arena component in your router's own link.
  • An anchor Arena draws splits its activations.
  • A press that starts on a control keeps to that control.
  • Two themes, dark first.
  • A chart carries identity or meaning, never both.
  • Copy is formal and direct, in the product's language.
  • A required member absent is a caller bug.
  • No render follows from whether you bound a listener or filled a slot.
  • A few components answer with a method rather than a member.

Install

bun add @dravensoft/arena-react     # or @dravensoft/arena-angular

That is the whole install. Bun installs the peers a project lacks. A manager that installs no peer, Yarn among them, needs them named, as the commands in install.md do. No icon font is a peer: arena build writes the sprite that ArenaIcon draws from. install.md lists the commands per layer, and the layer page below says which peers each package declares.

Then run npx --no-install arena init (or pnpm exec arena init, or bunx --no-install arena init), which copies an example arena.config.json and wires the build scripts, and import what arena build writes. skills/design/references/install.md is where it starts, for React and for Angular, and it links the config and the command. The pages npm shows are an introduction and a table of questions that link the same references.

Over MCP
{

"mcpServers": { "arena": { "command": "npx", "args": ["-y", "@dravensoft/arena-mcp"] } } }

@dravensoft/arena-mcp is where the language travels. It serves the router, the references and every component document to an agent that speaks the Model Context Protocol, as resources and as tools, and the layer it serves is the one your project installed. The component packages carry the code, the stylesheets and the contracts your own markup answers to, and none of the prose.

A corpus and the components it describes are two packages and two version numbers, so they can disagree. arena_start reads the version of the Arena package in your project, compares it with the server's, and says so when the two differ. Where they do, the components are right and the text is old.

As a Claude Code plugin
/plugin marketplace add dravensoft-dev/arena

/plugin install arena@dravensoft /reload-plugins

Update

/plugin marketplace update dravensoft   # refresh the catalog: learns a new version exists

/plugin update arena@dravensoft # update the plugin you actually have /reload-plugins # apply it to the running session

A version means one commit. Each release is served from its git tag, with the marketplace entry pinning source.ref to vX.Y.Z.

As a standalone Agent Skill

Hand any agent skills/design/SKILL.md. It is the router, and it answers each question with one file. It routes over this tree, so an agent handed the file alone has the questions and reaches the answers by URL; one handed the clone or the plugin reaches them by path.

A component package is code, and the language reaches an agent by one of the three routes above. Install the MCP server, install the plugin, or hand over the skill, and the agent gets the guidelines, the contracts and every component's usage document, which is what turns "integrate Arena" into a task it finishes on its own.

See it

[arena.dravensoft.org](https://arena.dravensoft.org) carries the design guidelines, the kitchen sink, and a playground page for every component, with no clone and nothing to install.

The same pages come up locally with bun run demos, from the same list, and scripts/build/AGENTS.md says what a fresh clone has to build before they mean anything.

An agent reads [`llms.txt`](https://arena.dravensoft.org/llms.txt) first, which routes to the rules of the language and then to one corpus per framework, React and Angular. They are separate on purpose: every component ships under both names and the two documents are not interchangeable.

Dependencies

  • Fonts are self-hosted, and no CDN request is made. Arena ships the Archivo / Familjen Grotesk / Spline Sans Mono .woff2 binaries in assets/fonts/, and contracts/design-generated/fonts.generated.css declares them with @font-face, so they load from the same origin as the page that reads them. A package consumer names their own three families in arena.config.json, where src is either a font file, which arena build cuts to what the product paints, or a stylesheet URL.
  • Icons are [Phosphor Icons](https://phosphoricons.com) (MIT), and no icon font is bundled. Every component takes a Phosphor class string and draws the glyph through ArenaIcon, from the sprite arena build writes. A raw ph-* element needs @phosphor-icons/web installed by the project. See Iconography.

Which version am I getting

The two packages and the plugin do not always carry the same number, because a package publishes only when something it ships changed. skills/design/references/versioning.md explains what that means.

Latest project artifacts

Where to go next

Which job is this? The two audiences read almost disjoint sets of these files, and starting on the wrong branch is how a short question turns into a long read.

Building something with Arena. skills/design/SKILL.md is the router. From it: frameworks/INDEX.md is every component in one read and frameworks/ /INDEX.md is the same list under your own framework's names, each component's .prompt.md is how to use that one, and skills/design/references/install.md is how to install it.

Working on Arena itself. AGENTS.md is the root of that branch, and everything below is reached through it.

  • scripts/build/AGENTS.md: compile Arena for the first time, meaning what a machine has to already carry, what a fresh clone must build before bun run demos or bun run check mean anything, and why some generated files are tracked and some are not. Linux and macOS are the two supported platforms; on Windows the supported path is WSL2, with the clone in the Linux filesystem.
  • frameworks/PACKAGING.md: the npm channel, meaning how the two packages are assembled from the tree in place, why a published Arena carries no skin, and what the consumer declares instea

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

PopNx에게 묻기