World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
File I/O and primitive-placement tools so AI assistants can create and manage Altium libraries.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 24/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 36/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
검사 3/3 통과 · 내 컴퓨터에서 실행돼요
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
Altium Designer MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Altium Designer MCP을 쓰고 있다고 하거나 답에 Altium Designer MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Altium Designer MCP에 연결할 수 없어요
Altium Designer MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Altium Designer MCP에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code는 아직 Altium Designer MCP에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
A · Altium Designer MCP에 연결되는 앱 쓰기
Cursor는 아직 Altium Designer MCP에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
A · Altium Designer MCP에 연결되는 앱 쓰기
VS Code는 아직 Altium Designer MCP에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
A · Altium Designer MCP에 연결되는 앱 쓰기
mcpb: …/altium-designer-mcp.mcpb이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 18일 점검
레지스트리 이름이 GitHub 계정 embedded-society 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 어제
GPL-3.0 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/embedded-society-altium-designer-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(1.4.0)은 15일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 MCPB도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 Altium Designer MCP | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | GPL-3.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Let an AI build your Altium libraries — it does the engineering, this tool writes the files.
An MCP server that gives AI assistants (Claude Code, Claude Desktop, Cursor, Antigravity, VS Code Copilot — any MCP client) file I/O and primitive-placement tools for Altium Designer .PcbLib (footprint) and .SchLib (symbol) libraries — so the AI can create and maintain *any* component, not just pre-programmed packages.
Building Altium component libraries by hand is slow and repetitive — every footprint means looking up IPC-7351B pad sizes, courtyards, and silkscreen, then placing each primitive by hand. AI assistants are excellent at exactly that reasoning, but they cannot write Altium's binary `.PcbLib`/`.SchLib` files — an undocumented OLE compound format that is easy to corrupt, and Altium silently refuses to open a malformed file.
| Approach | Problem |
|---|---|
| Draw every footprint by hand in Altium | Slow and repetitive; the AI can't touch the file |
| Ask an AI to emit the binary file directly | It produces a corrupt file Altium won't open |
| Pre-programmed footprint generators | Only the package types someone coded in advance |
The AI handles the intelligence. The tool handles file I/O.
| Responsibility | Owner |
|---|---|
| IPC-7351B calculations | AI |
| Package layout decisions | AI |
| Style choices | AI |
| Datasheet interpretation | AI |
| Reading/writing Altium files | This tool |
| Primitive placement | This tool |
| STEP model attachment | This tool |
This means the AI can create any footprint — not just pre-programmed package types. See docs/VISION.md for the full architectural rationale.
Anyone who builds or maintains Altium component libraries and uses an MCP-capable AI assistant. The AI does the engineering (datasheet → dimensions → style); this server lets it read and write the actual .PcbLib / .SchLib files.
| If you… | Then… |
|---|---|
| Use Claude Code, Claude Desktop, Cursor, Antigravity, VS Code + Copilot — any MCP client — and design in Altium | ✅ This is for you |
| Want pre-baked generators for a fixed set of packages | ❌ Not this — the point is *any* component |
| Don't use Altium | ❌ Not applicable |
[Client Setup](docs/CLIENT_SETUP.md) — verified configuration for Claude Code, Claude
Desktop, Google Antigravity, Cursor, VS Code, GitHub Copilot CLI, Windsurf, Cline, Roo Code,
Kiro, JetBrains, Zed, Gemini CLI, Codex CLI, Continue, Goose, OpenCode and any other stdio
MCP client, plus troubleshooting — on Windows, Linux, and macOS.
[Using the server](docs/USAGE.md) — what to ask for once it is connected: example
workflows, prompts and tips, identical for every client.
┌─────────────────────────────────────────────────────────────────────────────┐
│ AI-ASSISTED COMPONENT CREATION │ │ │ │ Engineer AI MCP Server │ │ │ │ │ │ │ │ "Create 0603 resistor" │ │ │ │ ├────────────────────────►│ │ │ │ │ │ │ │ │ │ │ AI reasons about: │ │ │ │ │ • IPC-7351B pad sizes │ │ │ │ │ • Courtyard margins │ │ │ │ │ • Silkscreen/symbol style │ │ │ │ │ │ │ │ │ │ write_pcblib(primitives) │ │ │ │ ├─────────────────────────────►│ │ │ │ │ │ Writes │ │ │ │ │ .PcbLib + │ │ │ │ write_schlib(symbol) │ .SchLib files │ │ │ ├─────────────────────────────►│ │ │ │ │◄─────────────────────────────┤ │ │ │ │ { status: "success" } │ │ │ │ │ │ │ │ │ "Done! Footprint │ │ │ │ │ and symbol created" │ │ │ │ │◄────────────────────────┤ │ │ │ │ └─────────────────────────────────────────────────────────────────────────────┘
The server exposes 34 tools, working on both .PcbLib (footprints) and .SchLib (symbols). Every tool's full parameters and examples live in [docs/TOOLS.md](docs/TOOLS.md) — this is the categorised overview.
| Tool | Purpose |
|---|---|
read_pcblib | Read footprints from a .PcbLib. |
write_pcblib | Write footprints to a .PcbLib. |
read_schlib | Read symbols from a .SchLib. |
write_schlib | Write symbols to a .SchLib. |
| Tool | Purpose |
|---|---|
list_components | List component names (paginated). |
get_component | Get one component's full data. |
search_components | Search across libraries by regex/glob. |
component_exists | Check whether components exist. |
render_footprint | ASCII-art preview of a footprint. |
render_symbol | ASCII-art preview of a symbol. |
extract_style | Extract styling from an existing library. |
| Tool | Purpose |
|---|---|
diff_libraries | Compare two library files. |
compare_components | Diff two specific components. |
| Tool | Purpose |
|---|---|
update_component | Update a component, preserving its position. |
update_pad | Update one pad's properties. |
update_primitive | Update one primitive (track/arc/text/fill/region). |
batch_update | Batch updates across all components. |
reorder_components | Reorder components in a library. |
manage_schlib_parameters | List/get/set/remove SchLib parameters. |
manage_schlib_footprints | Manage footprint links in SchLib symbols. |
| Tool | Purpose |
|---|---|
delete_component | Delete one or more components. |
copy_component | Duplicate a component within a library. |
rename_component | Rename a component (atomic). |
copy_component_cross_library | Copy a component to another library. |
bulk_rename | Pattern-based multi-rename. |
| Tool | Purpose |
|---|---|
merge_libraries | Merge multiple libraries into one. |
write_libpkg | Write a .LibPkg project grouping libraries for IntLib compilation. |
export_library | Export to JSON/CSV. |
import_library | Import from JSON (inverse of export). |
validate_library | Validate for common issues. |
repair_library | Remove orphaned data. |
extract_step_model | Extract embedded STEP 3D models. |
| Tool | Purpose |
|---|---|
list_backups | List automatic backups. |
restore_backup | Restore from a backup. |
| Primitive | Description |
|---|---|
| Pad | SMD or through-hole pad with designator, position, size, shape, layer (see Pad Shapes below), power-plane thermal relief, and its own polygon-connect style |
| Via | Vertical interconnect with layer span, hole size, and thermal relief |
| Track | Line segment on any layer (silkscreen, assembly, etc.) |
| Arc | Arc or circle on any layer |
| Region | Filled polygon (courtyard, copper pour), with optional hole contours |
| Text | Text string with font, size, position, layer |
| Fill | Filled rectangle on any layer |
| ComponentBody | 3D model reference (embedded STEP models) |
The shape property on pads controls the copper shape. Use this to indicate pin 1:
| Shape | Value | Usage |
|---|---|---|
| Rectangle | "rectangle" | Pin 1 indicator — use for the first pad to distinguish it visually |
| Rounded Rectangle | "rounded_rectangle" | Default for SMD pads (most common) |
| Round | "round" or "circle" | Circular pads, default for through-hole (both values are equivalent) |
| Oval | "oval" | Oblong pads for constrained spaces |
| Octagonal | "octagonal" | Eight-sided pads (chamfered corners) |
Example — marking pin 1 with a rectangular pad:
{
"pads": [ { "designator": "1", "x": -0.75, "y": 0, "width": 0.9, "height": 0.95, "shape": "rectangle" }, { "designator": "2", "x": 0.75, "y": 0, "width": 0.9, "height": 0.95, "shape": "rounded_rectangle" } ] }
This follows the IPC-7351 convention where pin 1 has a distinct shape (typically rectangular or square corners) while other pads use rounded corners.
| Primitive | Description |
|---|---|
| Pin | Component pin with name, designator, electrical type, orientation |
| Rectangle | Filled or unfilled rectangle (component body) |
| RoundRect | Rounded rectangle with corner radii |
| Line | Single line segment |
| Polyline | Multiple connected line segments |
| Polygon | Filled polygon with border and fill colours |
| Arc | Arc or circle |
| Pie | Filled circular sector (arc geometry plus fill) |
| Image | Embedded or linked raster picture with a bounding box |
| **