프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

mnema: decision records for AI coding agents

제작자: felipesauer버전 0.1.5i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.felipesauer/mnema

설치

개요

제작자가 쓴 설명(영어 원문)

Signed, append-only decision records for AI coding agents, over MCP. Verify them offline.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • npmNode.js 설치(npx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "mnema": {
      "command": "npx",
      "args": [
        "-y",
        "@mnema/code",
        "mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add mnema -- npx -y @mnema/code mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "mnema": {
      "command": "npx",
      "args": [
        "-y",
        "@mnema/code",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "mnema": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@mnema/code",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 felipesauer 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32568개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32568개 중 94%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32568개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

mnema: decision records for AI coding agents, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.1.5)은 그저께 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, FlyDocs

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

FlyDocs

제작자: flydocs.ai

Spec-driven development workflow: your agent works issues, sessions and the status lifecycle.

내 컴퓨터에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

@mnema/code

Your decisions, handed to your agents' sessions and held at the edits they govern: append-only and signed in the repository, and checkable by anyone.

Tamper-evident, not tamper-proof: what is still in the record has not changed since it was signed, and a stranger can check that without your keys and without installing this.

This is the package you install: the mnema command line and the MCP server of mnema, two surfaces over one record. The agent writes through MCP while it works, and the plugin in plugin/ hands the record to a session as it opens; you read, audit and verify from the terminal. It holds no domain logic of its own: the workflow rules and the proof live in @mnema/core and @mnema/chain.

What it gives you

  • A record of decisions in the repository that agents and people write to, each fact signed and appended, in a committed tree the team shares, a private one for this machine and a global one.
  • A command line to record, read, move work through its gates and verify, and an MCP server over stdio for the agent to do the same: both ask the same gate. At a terminal, mnema decision review goes through the decisions awaiting a judgement one by one (accept, reject, skip or quit), with no id to copy, and signs each verdict with your own key.
  • `mnema init`, which founds the record and leaves in .mnema/ a README.md that says what the folder is and an .editorconfig that unsets what an outer one could impose on its bytes; where the repository has a .prettierignore or declares prettier, it adds the line .mnema/ to it and says so. It writes the mnema instructions (when to call the mnema tools, and what never goes in the record) into AGENTS.md, into a CLAUDE.md or GEMINI.md that exists, and into a rule file of its own for Claude Code, Copilot and Cursor, and names each file. At a terminal it first shows what it found around the folder, asks which agent hosts to write them for (arrows and space; the hosts found are checked; Esc founds nothing) and whether an agent may accept what you choose, and shows everything it will write, once, before it writes any of it; with no terminal, or with --all-hosts or --yes, it asks nothing and writes all four (an agent whose shell is a pseudo-terminal passes --all-hosts or --yes, or it waits at the question). Run again in a project founded before, it adds only what that project lacks beside the record; mnema instructions, with --check or --remove, writes, checks or removes the instructions. mnema doctor points at a missing README, .prettierignore line or instructions block, names a pre-commit hook, Biome, dprint or lint-staged configuration that would rewrite the record, and edits none of those files.
  • Tasks that carry their words. The --description of task create and the --brief of task handoff (and the same two arguments of the create_task and record_handoff tools) record up to 64 KiB of text beside the task, as a note about it; mnema show serves the description, the last handoff with its brief and the notes, and the opening read says who has each task in flight and what happened last. A handoff that names no tree is recorded where its task lives. The format does not change.
  • `mnema verify`, which reads the record with no key and no network and prints the level it reached. A record a formatter rewrote is refused, and one line beside the refusal names the files, when reading them back in canonical form proves that is all that happened. An agent key one tree of the project retired is retired in the others it reads: what the key signed there after the retirement is refused, and not counted as attested.
  • A brief and a plugin that hand the decisions in force to an agent's session, and the rules addressed at a file beside a write to it (in Claude Code, Codex, Copilot CLI, Gemini CLI, Qwen Code and OpenCode). In Claude Code the plugin also hands the brief to a subagent as it starts, and, after a question the agent asked the person is answered, names the tool that records the choice. After a write there, a note of Claude Code's own memory for this project is copied into this machine's private tree, once per content (never the index MEMORY.md, never a note about the person, never the public tree; on until mnema switch off host-memory-mirror), and a file that holds decisions the record cites nowhere gets one line naming the command that imports it, which records nothing. When the mnema on the PATH is older than the plugin, the opening of the session says so and gives the command that fixes it; mnema doctor says it in either direction.
  • A record inherited from another repository (mnema inherit set), pinned at one commit and read only when it verifies there: its rules in force reach the paths they address, in mnema rules, mnema why, governing_rules and the gate before a write, each naming its origin and commit.
  • `mnema usage --tools`, which counts how many times each MCP tool was called, from a file this machine keeps in its home and never in the repository; mnema switch off tool-call-count stops it.
  • A session journal, which the Stop hook keeps on this machine, outside the record: ids and counts of what a session did with it (never its words), so the next Stop reads only what the host wrote since and the run the MCP server closes ends with an outcome that the resume and status readings print, and the notes the next session opens with say where this one stopped; a conversation that was compacted is handed back what entered the record while its session ran. mnema switch off session-journal, last-session and after-a-compaction stop them.
  • A task for the work a session hands to other agents, in the Claude Code plugin: the first dispatch of a session records one private task, each dispatch a private handoff on it (its short description and the path of a brief file, never the prompt), and the end of the session closes it; mnema switch off agent-mirror stops it. Every switch says where it begins and what it carries.

The reference has every verb and tool, and what each one leaves unproven.

What it proves, and what it does not

The record is tamper-evident, not tamper-proof: it does not stop an edit, and mnema verify shows when what is in the record has changed since it was signed, and a cut that leaves the last checkpoint in place; by default it does not catch a cut off the end that takes the last checkpoint with it, or one tail deleted whole while another remains (a key left without a tail is noted, not failed). A record in which no tail holds anything any more exits 1, by name, at every --require; --since exits 1 when files the revision held are gone. It reads the events and public keys of the project's trees, with no private key and no network, and prints each verdict verbatim.

  • It does not say every event is signed: the verdict names the level it reached, and only verified (T1/T2/T4) means every event is covered.
  • It does not catch someone holding the signing key who rewrites and signs again; a witness outside the machine (mnema witness stamp) dates the record, and the history a git remote keeps is what shows a cut.
  • It does not prove nothing was deleted: a tail removed together with its key, while another remains, leaves nothing on disk to cross.
  • It does not make the agent named on a fact the one that did the work, and it is not access control: anyone who can run the command line writes as this machine's identity.
  • It does not count every use of a tool: mnema usage --tools counts only the calls this machine's MCP server answered, nothing of it is signed, and verify does not read it.

The whole table, claim by claim, is in What it proves, and the long form of each row is in the reference.

Install

npm i -g @mnema/code

Then mnema doctor says whether the mnema your shell runs is the one you meant. Where the package came from says how to check the published version against its npm provenance.

The install page has the steps for a Node installed by the system. Requires Node 24.15.0 or a later 24, or 26.0.0 or later; the package is ESM-only.

Your first record

cd your-repository

mnema init mnema decision record "Use SQLite for the projection cache" \ "It is embedded, it is fast enough at our sizes, and it needs no service." mnema verify

Your first record shows what each of them prints, line by line.

Where to go next

The reference · Each host · How it works · The plugin · Where it fits · Evidence

License

Apache-2.0. See LICENSE and NOTICE, which this package carries.

PopNx에게 묻기