World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Your agents' memories (CLAUDE.md, AGENTS.md, napkins, rules) across projects and machines.
제작자가 쓴 원문
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 15/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 27/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 16 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Punk Records 설치해 줘. https://mcp.popnx.com/i/gablooge-punk-records.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 22일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Punk Records을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "punk-records": { "command": "uvx", "args": [ "punk-records", "mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Punk Records의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"punk-records": {
"command": "uvx",
"args": [
"punk-records",
"mcp"
]
}
}
}Punk Records을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Punk Records을 쓰고 있다고 하거나 답에 Punk Records 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Punk Records에 연결할 수 없어요
Punk Records는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Punk Records에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Punk Records을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user punk-records -- uvx punk-records mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Punk Records의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user punk-records -- uvx punk-records mcpPunk Records이 목록에 있고 연결됨으로 보이면 돼요
Punk Records을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Punk Records을 쓰고 있다고 하거나 답에 Punk Records 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Punk Records을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "punk-records": { "command": "uvx", "args": [ "punk-records", "mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Punk Records의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Punk Records을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Punk Records을 쓰고 있다고 하거나 답에 Punk Records 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Punk Records을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "punk-records": { "type": "stdio", "command": "uvx", "args": [ "punk-records", "mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Punk Records의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Punk Records을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Punk Records을 쓰고 있다고 하거나 답에 Punk Records 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Claude Code
claude mcp add --scope user punk-records -- uvx punk-records mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"punk-records": {
"command": "uvx",
"args": [
"punk-records",
"mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"punk-records": {
"command": "uvx",
"args": [
"punk-records",
"mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"punk-records": {
"type": "stdio",
"command": "uvx",
"args": [
"punk-records",
"mcp"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
pypi: punk-records이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 22일 점검
레지스트리 이름이 GitHub 계정 gablooge 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 오늘
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 punk-records@0.5.0 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 22일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/gablooge-punk-records)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 오늘 변경됐고, 최신 버전(0.5.0)은 오늘 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 Punk Records | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
One brain for all your AI agents. Persist every CLAUDE.md, AGENTS.md, napkin, and rules file from every project and machine in a single versioned store. Sync it over any git remote, or carry it across an air gap on a USB stick. Agents can read and write it live over MCP.
On Egghead, Dr.
Vegapunk keeps one shared brain, the
Punk Records. His satellites each go off
and learn things, and whatever they learn flows back into that shared brain. This project does the
same for your agents: each project and machine is a satellite, and
~/.punk-recordsis the brain.
The name is a nod to *One Piece* (the linked wiki pages contain spoilers). This is a fan-named
project, not affiliated with Eiichiro Oda, Shueisha or Toei Animation.
Agent memories are scattered across dozens of repos and dotfiles. Many of them are deliberately uncommitted (CLAUDE.local.md, napkins, ~/.claude/CLAUDE.md). They get lost when you wipe a laptop, they diverge between your work and home machines, and they can't follow you into an offline network.
CLAUDE.local.md, napkins, ~/.claude), notes you would rather not push to a team repo, or a machine that cannot reach the repo host. Punk Records stores those too, alongside the committed ones.| Scope | Files |
|---|---|
| Any project | CLAUDE.md, CLAUDE.local.md, AGENTS.md, AGENT.md, GEMINI.md, napkin.md, CONVENTIONS.md, .cursorrules, .windsurfrules, .clinerules, .goosehints (anywhere in the tree) |
.claude/*.md (napkins, commands, agents), .claude/skills/*, .cursor/rules/*, .windsurf/rules/*, .clinerules/*, .roo/rules/*, .kiro/steering/*, .github/copilot-instructions.md, .github/instructions/*.md | |
Claude Code auto memory, ~/.claude/projects/ /memory/*.md (stored as @claude-memory/...; restored into the matching folder for the project's path on each machine, and shared by its worktrees) | |
Global ($HOME) | ~/.claude/CLAUDE.md, ~/.claude/napkin.md, ~/.claude/{commands,agents,skills}/*, ~/.codex/AGENTS.md, ~/.gemini/GEMINI.md, ~/.config/goose/.goosehints |
Run punk scan to see what would be captured. To add your own patterns, put globs in punk.json inside the store ({"include": ["docs/ai/*.md"], "exclude": []}). To leave Claude Code auto memory out, use {"exclude": ["@claude-memory/*"]}. CLAUDE_CONFIG_DIR is honoured; a custom autoMemoryDirectory setting is not read yet.
Requires Python 3.9+ and git. No other dependencies.
pipx install punk-records # or: pip install punk-records
brew install gablooge/tap/punk-records # Homebrew on macOS or Linux; brings its own Python uv tool install punk-records # with uv
punk init # creates ~/.punk-records and tracks your global memories
punk track ~/code/app ~/code/api punk save # snapshot every memory file into the store punk context ~/code/app # everything an agent should know there, as one document
Create a private repo (GitHub, GitLab, Gitea, a bare repo on your NAS, anything git can reach):
punk git remote add origin git@github.com:you/my-punk-records.git
punk sync # save -> pull -> push -> restore
On another machine:
punk init git@github.com:you/my-punk-records.git
punk track ~/src/app # matched to the same records through the project's git remote punk sync
Projects get their identity from their git remote (github.com/you/app), so the same repo checked out at different paths on different machines shares one set of memories. Projects without a remote get local/ ; you can override it with punk track --id.
If the host should not see your memories at all, let punk encrypt them with age (install age first; still no Python dependencies):
punk encrypt init git@github.com:you/my-punk-records.git # makes ~/.config/punk/age.key if missing
punk sync
Your store stays plain text on each machine; the remote only ever holds one file, punk-records.bundle.age, replaced on every push. On another machine, copy ~/.config/punk/age.key (keep it private and backed up; without it the remote cannot be read) and run punk init --encrypted . A machine can also keep its own key: run punk encrypt add-recipient on a machine that can already read the remote, then sync there. punk encrypt status shows the key and recipients. If an encrypted store also has a plain git remote, punk sync refuses to run rather than push anything unencrypted.
Read another Punk Records store too, for example your team's shared conventions:
punk subscribe acme git@github.com:acme/team-punk-records.git
punk subscriptions # what you read, and when it was last updated punk unsubscribe acme
For any project, punk context (and the MCP get_context tool and punk-context prompt) then shows the team's general rules, your global memories, the team's notes for that repo (matched by its git remote, even if you don't track it), and your project memories last, so your own notes have the final word. punk search labels team hits @acme/.... Subscriptions are read-only: nothing from them is written into your projects or your store, or pushed anywhere. punk sync and the Claude Code session-start hook fetch them, and an unreachable one never blocks your own sync. Subscriptions are per machine; run punk subscribe on each machine that should read them.
punk export /media/usb/records.bundle # on the connected side
punk import /media/usb/records.bundle # on the air-gapped side (and back again)
A bundle is a standard git bundle file. It carries full history and can be verified on arrival, and imports merge the same way online pulls do.
Paste one of these into Claude Code, Cursor, Codex or any agent that can run shell commands:
Install https://pypi.org/project/punk-records with pipx, run
punk init, track this repo with
punk track ., save, and register its MCP server for Claude Code for all my projects
(
claude mcp add --scope user punk-records -- punk mcp). Then runpunk scanand tell me which
memory files it found.
I'm setting up a new laptop. Use https://pypi.org/project/punk-records to bring back my agent
memories:
punk init git@github.com:me/my-punk-records.git, then track every repo under ~/code
and run
punk sync.
Use punk-records (https://pypi.org/project/punk-records) to keep this project's CLAUDE.md and
AGENTS.md in sync across my machines automatically: run
punk install-hooks.
The plugin sets up both the MCP server and the session hooks in one step (Claude Code 2.1.275 or newer; punk itself still comes from pipx install punk-records):
/plugin install punk-records --marketplace gablooge/punk-records
Or do the same by hand:
claude mcp add --scope user punk-records -- punk mcp # all projects; without --scope: this project only
punk install-hooks # restore at session start, save + sync at the end
Use one or the other: with both, memories are restored and saved twice. The plugin's setup skill (/punk-records:setup) walks through installing punk, punk init and tracking the project, and removes hooks left by punk install-hooks.
There is no server to keep running: Claude Code starts punk mcp when a session begins and talks to it over stdin/stdout. Run punk init once first. If punk is not found, use the full path from which punk.
Cursor: add to ~/.cursor/mcp.json (all projects) or .cursor/mcp.json (one project):
{ "mcpServers": { "punk-records": { "command": "punk", "args": ["mcp"] } } }
Codex (CLI, IDE extension and ChatGPT desktop share this):
codex mcp add punk-records -- punk mcp # or [mcp_servers.punk-records] in ~/.codex/config.toml
Any other MCP client works the same way: a stdio server with "command": "punk" and "args": ["mcp"].
Clients that browse the MCP Registry find it as io.github.gablooge/punk-records; they start it with uvx punk-records mcp, which needs uv instead of a pipx install. Run uvx punk-records init once first.
code --install-extension gablooge.punk-records) or, for VSCodium and Cursor, Open VSX. It needs punk 0.4.0 or newer; source at punk-records-vscode.~/.claude/settings.json and the MCP configuration with the CLI, so punk install-hooks and claude mcp add --scope user punk-records -- punk mcp apply inside VS Code too.punk mcp.| You say | The agent uses |
|---|---|
| "Before you start, check punk records for what I already know about this repo." | get_context |
| "Search punk records across all my projects: how did I set up GitHub Actions caching?" | search_memories |
| "Which projects do I have memories for?" | list_satellites, list_memories |
| "Show me the napkin for github.com/me/api." | read_memory |
| "Remember in punk records: integration tests need Docker running." | append_memory |
| "Before we finish, save the gotchas you h