MinerU
Transforms complex documents like PDFs and Office docs into LLM-ready markdown/JSON for your Agentic workflows.
Config drift, CIS/PCI checks, 802.1X diagnosis, certs inside configs, topology, change pre-flight.
제작자가 쓴 원문
이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다
Transforms complex documents like PDFs and Office docs into LLM-ready markdown/JSON for your Agentic workflows.
Agent skills for Obsidian. Teach your agent to use Obsidian CLI and open formats including Markdown, Bases, JSON Canvas.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
NetOps Field Notes 설치해 줘. https://mcp.popnx.com/i/getlarkwright-netops-field-notes-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server NetOps Field Notes을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "netops-field-notes": { "command": "docker", "args": [ "run", "-i", "--rm", "ghcr.io/getlarkwright/netops-field-notes-mcp:0.1.1" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 NetOps Field Notes의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"netops-field-notes": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/getlarkwright/netops-field-notes-mcp:0.1.1"
]
}
}
}NetOps Field Notes을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 NetOps Field Notes을 쓰고 있다고 하거나 답에 NetOps Field Notes 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 NetOps Field Notes에 연결할 수 없어요
NetOps Field Notes는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · NetOps Field Notes에 연결되는 앱 쓰기
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server NetOps Field Notes을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user netops-field-notes -- docker run -i --rm ghcr.io/getlarkwright/netops-field-notes-mcp:0.1.1 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 NetOps Field Notes의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user netops-field-notes -- docker run -i --rm ghcr.io/getlarkwright/netops-field-notes-mcp:0.1.1NetOps Field Notes이 목록에 있고 연결됨으로 보이면 돼요
NetOps Field Notes을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 NetOps Field Notes을 쓰고 있다고 하거나 답에 NetOps Field Notes 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server NetOps Field Notes을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "netops-field-notes": { "command": "docker", "args": [ "run", "-i", "--rm", "ghcr.io/getlarkwright/netops-field-notes-mcp:0.1.1" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 NetOps Field Notes의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
NetOps Field Notes을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 NetOps Field Notes을 쓰고 있다고 하거나 답에 NetOps Field Notes 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server NetOps Field Notes을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "netops-field-notes": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "ghcr.io/getlarkwright/netops-field-notes-mcp:0.1.1" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 NetOps Field Notes의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
NetOps Field Notes을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 NetOps Field Notes을 쓰고 있다고 하거나 답에 NetOps Field Notes 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Claude Code
claude mcp add --scope user netops-field-notes -- docker run -i --rm ghcr.io/getlarkwright/netops-field-notes-mcp:0.1.1Claude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"netops-field-notes": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/getlarkwright/netops-field-notes-mcp:0.1.1"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"netops-field-notes": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/getlarkwright/netops-field-notes-mcp:0.1.1"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"netops-field-notes": {
"type": "stdio",
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"ghcr.io/getlarkwright/netops-field-notes-mcp:0.1.1"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검
레지스트리 이름이 GitHub 계정 getlarkwright 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 13일 전
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/getlarkwright-netops-field-notes-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 13일 전 변경됐고, 최신 버전(0.1.1)은 13일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.
같은 카테고리에는: Puter MCP, XcodeBuildMCP, Vexa, Atlassian Rovo MCP Server, Anki MCP Server
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Puter MCP enables AI tools to interact with Puter: manage files, websites, workers, and more
XcodeBuildMCP provides tools for Xcode project management, simulator management, and app utilities.
Meeting bot and transcripts for Google Meet, Teams and Zoom. Live or after, speakers labelled.
Connect to Atlassian Jira, Confluence, Loom, and more to search, create, and manage your work.
MCP server for Anki flashcards: adaptive review, notes, media, and deck management via AnkiConnect.
| 이 항목 NetOps Field Notes | Puter MCP | XcodeBuildMCP | Vexa | Atlassian Rovo MCP Server | Anki MCP Server | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 컴퓨터에 설치 필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 예 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 예 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 3/3 | 2/4 | 4/4 | 3/3 |
| 라이선스 | MIT | AGPL-3.0 | MIT | Apache-2.0 | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
The things I check by hand on network gear, as tools your coding agent can call: what changed between two config snapshots and how much it matters, whether a config passes the CIS/PCI basics, why a port will not pass 802.1X, which certificates are hiding inside a config and when they expire, what a device is and what it sits next to, what an OPNsense rule change actually does, and whether a proposed change is safe to push.
Read-only. Deterministic — no model call, so two engineers get the same answer. No account, no telemetry, nothing read from your disk: configs and logs go in as text.
Pin the version.
Claude Code
claude mcp add netops-field-notes -- uvx --from "git+https://github.com/getlarkwright/netops-field-notes-mcp@v0.1.1" netops-field-notes-mcp
Claude Desktop, Cursor, or any client with a JSON config
{
"mcpServers": { "netops-field-notes": { "command": "uvx", "args": ["--from", "git+https://github.com/getlarkwright/netops-field-notes-mcp@v0.1.1", "netops-field-notes-mcp"] } } }
Docker
{
"mcpServers": { "netops-field-notes": { "command": "docker", "args": ["run", "-i", "--rm", "ghcr.io/getlarkwright/netops-field-notes-mcp:0.1.1"] } } }
Python 3.10 or newer for the uvx route (uv installs it). Also in the official MCP registry as io.github.getlarkwright/netops-field-notes-mcp.
| Tool | What it answers |
|---|---|
explain_config_diff | What changed between two snapshots, grouped by section, risk-rated, in plain English — EdgeOS, RouterOS, OPNsense, EdgeSwitch, Cisco IOS-style |
check_config_compliance | Does this config pass ten CIS/PCI checks, and what is the one-line fix for each miss |
diagnose_dot1x | Why won't this port authenticate — from the RADIUS log, the switchport config and/or the supplicant log |
lookup_ise_failure_code | What does ISE step code 12514 (or 11036, 22056…) mean and what fixes it |
find_certs_in_config | Which certificates are embedded in this config, and which are expiring, weak or self-signed |
check_tls_endpoint | The same findings on the certificate a public host actually serves |
extract_device_facts | Hostname, role, addresses, subnets, VLANs from a config |
infer_topology | Which of these devices share segments — as a Mermaid diagram |
explain_firewall_change | An OPNsense config.xml change, rule by rule, with risk grounds and shadowing notes |
preflight_change | Is this proposed change safe — risk, compliance regressions, blast radius, a gate verdict |
sanitize_config | Scrub secrets and map addresses consistently before a config goes anywhere |
latest_field_note | What happened in networking this week |
The one that saves the most time. Paste what you have — any of the three inputs — and it names the failure mode rather than restating the log:
ROOT CAUSE
Two defects: (1) dot1x failed on an EAP mismatch (EAP-TLS vs EAP-PEAP); (2) MAB then Accepted with NO dynamic VLAN, so the endpoint landed on VLAN 10 instead of VLAN 30.
RECOMMENDED FIX
authentication event fail action authorize vlan 30 as a local backstop.
It knows the difference between a CoA sent to port 1700 and one sent to 3799, an unknown-CA failure and a missing client certificate, and a permit any any eq 443 dACL that IOS will reject.
Web monitors watch ports. Certificates on network gear live in the config — Cisco crypto pki chains, RouterOS exports, OPNsense blobs — and expire without anybody watching. This reads them out of the text and applies the same rules as the endpoint check: expiry buckets, RSA under 2048, MD5/SHA-1 signatures, self-signed leaves (rated by where they are used), CA certificates inside 90 days of expiry.
preflight_change tells you what would happen; applying it is your job, with the rollback it hands you.check_tls_endpoint to the host you name (it refuses private and reserved addresses, so it cannot be turned on your own network), and latest_field_note to a public RSS feed.These are the read-only cores of DriftWatch and its siblings, which run the same rules nightly across a fleet, keep the history, and turn the results into reports. Here you get the single-shot version on what you paste. That is deliberate — the rules are the useful part, and they work on their own.
MIT © Larkwright LLC. Written by James Son — network, security, and automation engineer — and run against a live multi-vendor lab before shipping. Corrections welcome, especially to the ISE code table.