Pixly

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

• 연결 방식: 클라우드에서 실행
• 전송 방식: Streamable HTTP
• 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

필요한 것

• 클라우드에서 실행설치할 것 없음. 인터넷으로 연결돼요

어떤 앱을 쓰세요?

https://pixly.gg/api/mcp

claude mcp add --transport http pixly https://pixly.gg/api/mcp

{
  "mcpServers": {
    "pixly": {
      "url": "https://pixly.gg/api/mcp"
    }
  }
}

{
  "servers": {
    "pixly": {
      "type": "http",
      "url": "https://pixly.gg/api/mcp"
    }
  }
}

https://pixly.gg/api/mcp

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

• getBedrockRange

  Returns the Java version range Bedrock players can join, for fabric, neoforge and spigot (Paper and its forks); an empty string means unknown. Check it before enabling config.bedrockEnabled.

• listBills

  Lists past calendar months' bills, newest first, each with its cost per server, split into compute, data sent to players and world storage. status pending means the month is closed but its bill is not final yet. Match each serverId to a name with listServers; a deleted server no

• getMonthSpending

  Breaks this calendar month's spend so far down by server: cost, compute cost, data sent to players and time awake. Match each serverId to a name with listServers and name servers by that name. For the total and the balance use getBalance.

• getLoaderVersions

  Lists the Minecraft versions each config.type can run, keyed by type. Use it before createServer or updateServer to choose config.version. VANILLA is omitted because it runs every version; a missing type means its list is unavailable.

• getPricingCatalog

  Returns estimated monthly prices in US cents, as the site shows them, for every available region and size under three play schedules (casual, regular, evenings), plus always-on host references when available. Name each size by its memoryGb, adding vcpu when two sizes share the sa

• listServers

  Lists the account's servers with id, name, join address, region, size, settings, state and recent disk, memory and lag figures. runtime.loadCause, when present, says why a server keeps lagging with players on: memory (garbage collection), cpu-starved (one core shared with backgro

• createServer

  Creates a server, asleep and free until startServer or a joining player wakes it, and returns it with its id and join address. Region sets player latency and cannot change later: ask where players are if unknown; regions and size prices come from getPricingCatalog. Optional conte

• deleteServer

  Permanently deletes the server with its world, settings, backups and exports, shutting it down if running. Call it only for a server the user named in this request, one server per call; for a request that names none or covers several, such as delete my servers, list them with lis

• updateServer

  Changes a server's name, size, settings, player lists, content, auto-start or custom domain. Omitted fields are kept, and a sent list replaces the stored one (uploaded files excepted). Not for the resource pack (setResourcePack) or a fresh world (resetServer). The returned server

• startAssetUpload

  Only for an assistant that can send the user's file with HTTP PUT, such as a coding agent with a shell. Begins uploading one .jar or .zip mod, plugin, datapack or resource pack (up to 512 MiB, storage capped per server and account) and returns uploadId, key, fileName and parts: P

• abortAssetUploads

  Discards one or more (up to 50) unfinished or inspected uploads. Returns aborted and leftover. Installed files are removed with deleteAsset.

• completeAssetUploads

  Installs one or more (up to 50) files from startAssetUpload calls; resource packs go through setResourcePack. Files failing a check are returned in rejected with key and error; the rest apply at the next restart.

• inspectAssetUpload

  Completes a startAssetUpload and reports its kind, size and metadata without installing it. To install, pass it to completeAssetUploads, or setResourcePack with its key for a resource pack; abortAssetUploads discards it.

• deleteAsset

  Uninstalls a custom mod, plugin or datapack file that was uploaded to the server and deletes the file, taking effect at the next restart. The file can only be recovered from a backup.

• listBackups

  Lists backups newest first with backupId, startTime, sizeBytes, reason (daily, manual, upload, freeze, reset, config-change) and exportState (idle, exporting, ready). Pass backupId to restoreBackup, cancelBackupRestore, startBackupExport, getBackupDownloadUrl (exportState ready)

• createBackup

  Takes a manual backup of the server's current world, which can later be restored or exported. Fails while the server is starting, stopping or restoring, before its first boot, or when the account balance is too low. Returns the backup as pending; listBackups shows it completed wh

• deleteBackup

  Permanently deletes one backup; this cannot be undone. A backup that is queued for restore or being exported cannot be deleted. For the only remaining copy of a world the call is refused with requiresConfirmation; ask the user, then repeat with confirm true.

• getBackupDownloadUrl

  Returns a signed link, valid for 6 hours, to download a backup exported with startBackupExport. Fails if the export is not ready yet; requires a paid account. Returns url (a .tar.gz for the user) and expiresAt.

• deleteBackupExport

  Deletes the downloadable archive made by startBackupExport. The backup itself is kept and can be exported again.

• startBackupExport

  Packages a backup into a downloadable archive. Requires a paid account and balance; refused while another upload, export or restore is pending (at most 3 per account). Poll listBackups until exportState is ready, then call getBackupDownloadUrl; if it returns to idle instead, the

• cancelBackupRestore

  Cancels a restore from restoreBackup that an online server has not applied yet. Pass the queued backupId. Fails if nothing is queued for it or it is already being applied.

• restoreBackup

  Replaces the whole world with the chosen backup. No backup of the current world is taken, so everything since that backup is lost unless you run createBackup first. An asleep server restores at once; an online server applies it at the next restartServer or restartToApplySettings,

• getConsoleLogs

  Returns up to 200 recent console lines, including startup, oldest first. Use it to see why a server failed to start or what happened in game; it cannot run commands. Returns events, nextCursor (newer) and prevCursor (older); platform notices are left out, so a page can hold fewer

• verifyCustomDomain

  Looks up the public DNS record of the custom domain set with updateServer customDomain and updates its status; use it after the user changes DNS. A record that points at the server verifies the domain and starts routing players to it. A failing record is reported with its reason

• dismissJoinAttempt

  Clears the notice for a player the whitelist turned away; it does not whitelist, kick or ban. To let them in, add them to whitelist with updateServer. Returns the server.

• keepServerAwake

  Delays a running server's idle sleep by 5 minutes from now; it keeps being charged meanwhile. Use it while working on a server with no players online; to wake an asleep server use startServer. Fails with 409 if not running. Returns sleepAt.

• getServerMetrics

  Returns the server's load samples over the last minutes (default 30, up to 360), oldest first, one about every 30 seconds while it runs. Each point has its time, memory use, tick load in permille (divide by 20 for milliseconds per tick; 1000 means the server is lagging) and peak

• deleteModpack

  Uninstalls the server's uploaded custom modpack and deletes the file, taking effect at the next restart. The world is kept, though the server may then suggest a world reset to clear content the pack left behind.

• startModpackUpload

  Only for an assistant that can send the user's file with HTTP PUT, such as a coding agent with a shell. Begins uploading a Modrinth .mrpack or a CurseForge modpack .zip (up to 1 GiB). Returns uploadId, key, fileName and parts (url valid one hour): PUT each piece, keep each ETag,

• abortModpackUpload

  Cancels an unfinished, or checked but not yet installed, modpack upload and discards the file. An installed modpack is not affected; remove it with deleteModpack.

• completeModpackUpload

  Installs the uploaded file as the server's modpack, replacing loader, version and mods at the next restart; a backup is taken first. Pass uploadId, key and each ETag, and replace to swap out a modpack that is already set. Returns the server.

• inspectModpackUpload

  Completes a startModpackUpload and returns its version, loader and contents without installing. To install, call completeModpackUpload with the same arguments; abortModpackUpload discards it.

• resetServer

  Replaces the world with a fresh one, keeping settings, content and address; for an earlier world use restoreBackup instead. A running server disconnects its players and comes back online on the new world. A reset backup of the current world is taken first and earlier backups are

• setResourcePack

  Sets the resource pack players are offered on join, from Modrinth, an uploaded .zip or a link; from: none removes it. It applies at the next restart (restartToApplySettings). Make it mandatory with resourcePackRequired in updateServer. Returns the server.

• restartServer

  Reboots a running server's machine; players are disconnected for a minute or two while it boots and fetches its content from Modrinth, CurseForge or their download links. Use it for a pending size change or a stuck server; for changed game settings use restartToApplySettings. A r

• restartToApplySettings

  Restarts only the Minecraft program on an online server so changed settings apply; players drop for a few seconds while it reloads content from Modrinth, CurseForge or their download links. Use it when the server reports a restart is required; for a size change use restartServer.

• startServer

  Wakes an asleep server so players can join it from the internet at its address; not for an online server (use restartServer). While booting it fetches its mods, plugins and modpack from Modrinth, CurseForge or their download links, and a backup queued with restoreBackup replaces

• stopServer

  Shuts a running server down so it sleeps, disconnecting players and ending running charges; world and settings are kept. For a reboot use restartServer. While autoStartEnabled is on, a joining player wakes it (turn off with updateServer). Returns the server.

• startWorldUpload

  Only for an assistant that can send the user's file with HTTP PUT, such as a coding agent with a shell. Begins uploading a world archive (.zip, .tar.gz, .tgz; up to 4 GiB). Returns jobId, uploadId, key and parts (partNumber, url valid one hour): PUT each piece to its url, keep ea

• abortWorldUpload

  Cancels an unfinished world upload and discards the parts uploaded so far. The server's current world is not affected. Only before completeWorldUpload.

• completeWorldUpload

  Call after every piece is uploaded, with jobId, uploadId, key and each ETag. The current world is not changed: the archive is imported in the background (minutes) into a new backup with reason upload in listBackups. To play it, run restoreBackup with that backupId. Fails over 4 G

• refreshWorldUploadParts

  Returns new one-hour links for pieces of a startWorldUpload whose links expired. Pass jobId, uploadId, key and the pieces still to upload.

• getServerUsage

  Returns the time the server spent with at least one player online in its latest unbroken run on its current size (its last 7 days with players, or more days back until they hold 8 hours), histograms of CPU, tick load, GC pause share, memory peak, the JVM's live set and memory out

• getBalance

  Shows the signed-in user's balance, this month's spend so far and projected total, and what awake servers cost per hour. Call it when the user asks about their balance or spending, or wants to add funds. It cannot add funds or take payments; funds are added in the Pixly dashboard

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

• ✓ 통과

  제작자와 저장소 일치

  레지스트리 이름이 도메인 pixly.gg 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

• … 아직 점검 안 함

  계속 관리되고 있음

  아직 GitHub에서 이 저장소를 읽어 오지 않았어요

• … 아직 점검 안 함

  라이선스 있음

  아직 GitHub에서 이 저장소를 읽어 오지 않았어요

• ✓ 통과

  엔드포인트 응답

  944ms 만에 응답(HTTP 200)

• – 해당 없음

  OAuth로 로그인

  로그인 필요 없음

• ✓ 통과

  도구 설명에 숨겨진 지시 없음

  도구 설명 44개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

• 이 카테고리의 다른 서버 32706개 중 0%보다 스타가 많아요
• 이 카테고리의 다른 서버 32706개 중 82%보다 최근에 레지스트리에 공개됐어요
• 기본 점검 결과가 이 카테고리의 다른 서버 32706개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

제작자의 README

/plugin install pixly --marketplace Wroud/pixly-plugins

codex plugin marketplace add wroud/pixly-plugins

npm test                  # offline checks: manifests, listing limits, skill, review cases, secret scan