프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Tapebasis

제작자: giraygokirmak버전 1.2.1i★ 0i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.giraygokirmak/tapebasis

설치 방법

What it does

Market data from multiple independent providers, compared with clear provenance.

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 회계, 재무 및 세금

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기14/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수26/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 13 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 3/3 통과 · 내 컴퓨터에서 실행돼요

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  3. 이 설정을 붙여 넣고 저장

    명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요

  4. Claude를 끄고 다시 열기

  5. 해 보기

    Tapebasis을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Tapebasis을 쓰고 있다고 하거나 답에 Tapebasis 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Tapebasis에 연결할 수 없어요

Tapebasis는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Tapebasis에 연결되는 앱 쓰기

  • 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

B · 회계, 재무 및 세금에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  3. 이 명령을 붙여 넣고 Enter

    명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요

  4. Claude Code에서 /mcp 입력

    Tapebasis이 목록에 있고 연결됨으로 보이면 돼요

  5. 해 보기

    Tapebasis을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Tapebasis을 쓰고 있다고 하거나 답에 Tapebasis 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 Cursor 열기

    명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요

  3. Cursor에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Tapebasis을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Tapebasis을 쓰고 있다고 하거나 답에 Tapebasis 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 VS Code 열기

    명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요

  3. VS Code에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Tapebasis을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Tapebasis을 쓰고 있다고 하거나 답에 Tapebasis 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Tapebasis을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요

Claude Desktop (claude_desktop_config.json)

명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요

Cursor (~/.cursor/mcp.json)

명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요

VS Code (mcp.json)

명령을 확인하는 중 · 확인을 통과하면 복사 버튼이 나타나요

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
427/주
연결 방식
내 컴퓨터에서 실행
최신 버전i
1.2.1
레지스트리 공개i
2026년 11월 19일
코드 마지막 변경i
2026년 11월 19일
제작자
giraygokirmak
패키지
npm: tapebasis
pypi: tapebasis
웹사이트
github.com
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 giraygokirmak 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 오늘

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

아직 확인하지 않았습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/giraygokirmak-tapebasis.svg)](https://mcp.popnx.com/en/servers/giraygokirmak-tapebasis)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

회계, 재무 및 세금 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 3440개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 3440개 중 99%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 3440개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Tapebasis, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 오늘 변경됐고, 최신 버전(1.2.1)은 오늘 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js, Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: SolidInvoice, Signal8, Journalit, Beancount.io, Tapetide - Indian Stock Market MCP

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

SolidInvoice

Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.

제작자: SolidInvoice성장 중★ 99110일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · solidinvoice.co

Signal8

SEC filings, dilution, insider & institutional ownership, and political-trade data for AI agents.

제작자: signal8ai성장 중↓ 431/주★ 42510일 전 업데이트

컴퓨터 또는 클라우드✓ 서비스 회사 · signal8.ai

Journalit

Trading journal in Obsidian. Ask Claude or ChatGPT about your trades; edits are previewed first.

제작자: Cursivez성장 중★ 26111일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · journalit.co

Beancount.io

Query, edit, and reconcile a hosted Beancount ledger: BQL, reports, files, and bank imports.

제작자: bex-co성장 중★ 702 저장소 전체의 별44일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · beancount.io
비슷한 항목과 비교
이 항목
Tapebasis
SolidInvoiceSignal8JournalitBeancount.ioTapetide - Indian Stock Market MCP
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드 또는 컴퓨터 설치 모두 가능클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드 또는 컴퓨터 설치 모두 가능
키 필요아니요아니요예아니요아니요예
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/65/54/44/45/5
라이선스MITMITMITNOASSERTIONMITMIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Multiple tapes, one basis. An MCP server that serves TradingView, Finviz, Yahoo Finance, StockAnalysis and Bloomberg market data together, cross-checks every overlapping figure, and labels each response with the provider that actually produced it.


*Basis* is the finance term for the price difference between two markets quoting the same asset. *Tape* is the ticker tape. Tapebasis is the spread between multiple feeds, measured on every call: zero when they agree, reported when they don't.

The point is redundancy you can *see*. Every provider that could answer a field is asked, natively in parallel. When several answer, the data is cross-checked. When only one answers, you get the data, clearly marked as single-source. When none answers, you get NONE instead of a plausible-looking number. And because every provider scrapes or calls an undocumented upstream, a background monitor probes every endpoint and reports API/schema drift inside ordinary tool responses.

Each provider is fetched natively: TradingView's own scanner and chart websocket, Finviz's HTML and JSON islands, Yahoo's chart API, StockAnalysis's quote API, Bloomberg's quote pages. No leg proxies another: a provider that quietly forwards a competitor's numbers is worthless as a cross-check.

Bloomberg and StockAnalysis are the other two legs, asked like the rest, in parallel, on the same call. The properties that make each of them different from a plain live feed are reported rather than hidden by a tolerance. Bloomberg's equity and index prints are exchange-delayed (exchangeDelay is 15 Minutes), so a pair of prints further apart than the print-time guard allows is reported as not comparable with the delay named, instead of being called a provider disagreement; it also never wins the freshness tie-break against a live print. Its static fields are penny-identical to Yahoo's, so agreement between those two is weak corroboration, not two independent witnesses. What it adds is its own quote pages and the government benchmark yield curve, which no other provider here publishes. StockAnalysis covers US equities and ETFs only, and its quote surface is the same consolidated tape Yahoo serves, so that pair is weak corroboration for the same reason; indices, FX, crypto, commodities and foreign listings are reported as not carried instead of requested.


The data_provider contract

Every tool result carries exactly one of eight values. It states coverage, never agreement:

ValueMeaning
ALLEvery provider that was asked answered. Coverage is complete for this call.
PARTIALMore than one answered, but a provider that was asked produced nothing. The values are served; errors says why the missing leg is missing.
TRADINGVIEWOnly TradingView answered. Served, but not corroborated.
FINVIZOnly Finviz answered. Served, but not corroborated.
YAHOOOnly Yahoo Finance answered. Served, but not corroborated.
SAOnly StockAnalysis answered. Served, but not corroborated; US equities and ETFs only.
BLOOMBERGOnly Bloomberg answered. Served, but not corroborated; its quote can be delayed.
NONENo provider could supply it. No value is presented.

ALL means "every provider asked answered", not "they agree". Agreement is a separate axis, and it lives in comparisons[].match. A provider that was asked and failed makes the response PARTIAL, never ALL: the label describes coverage, and a listed error is missing coverage. providers_answered names exactly which providers contributed. The positive agreement notice appears only after a real agreeing comparison. Invalid pairs keep their readings, match: null and a not_comparable reason; a resolved symbol that returns no data is NO_DATA, not NOT_ATTEMPTED.

The same envelope also contains:

{

"data_provider": "ALL", "verification": "MULTI_SOURCE", // MULTI_SOURCE | SINGLE_SOURCE | UNAVAILABLE "providers_answered": ["TRADINGVIEW", "FINVIZ", "YAHOO", "SA", "BLOOMBERG"], "notice": "Every provider asked answered (TradingView, Finviz, Yahoo Finance, StockAnalysis and Bloomberg). ...", // names whichever answered "data": { ... }, // the reconciled payload, one value per field "fields": { // per-field provenance, never a joint label "price": { "source": "FINVIZ", "supplied": ["TRADINGVIEW", "FINVIZ", "YAHOO", "SA"], "compared": ["TRADINGVIEW", "FINVIZ", "YAHOO", "SA"], "agreement": true }, "peers": { "source": "FINVIZ", "supplied": ["FINVIZ"], "compared": [], "agreement": null } }, "freshness": { // why data holds the value it does "tradingview": "2026-11-04T00:59:53+00:00", "finviz": "2026-11-04T10:42:00+00:00", "yahoo": "2026-11-03T21:00:01+00:00", "sa": "2026-11-03T21:00:01+00:00", // same consolidated tape as Yahoo "bloomberg": "2026-11-04T10:27:00+00:00", // 15 min behind, so it cannot win "chosen": "FINVIZ", "decision": "newest", // newest | tie | no_timestamp "newest_print": "2026-11-04T10:42:00+00:00", "reason": "FINVIZ printed most recently (2026-11-04T10:42:00+00:00)" }, "comparisons": [ // the actual side-by-side numbers { "field": "price", "values": { "TRADINGVIEW": 331.9, "FINVIZ": 332.33, "YAHOO": 331.9, "SA": 331.9, "BLOOMBERG": 332.1 }, "match": true, "diff_pct": 0.1294, "tolerance_pct": 0.5, "pairs": [ { "between": ["TRADINGVIEW", "FINVIZ"], "match": true, "diff_pct": 0.1294 }, ... ], "chosen": "FINVIZ" } ], "resolutions": { "TRADINGVIEW": { "symbol": "NASDAQ:AAPL", ... }, ... }, "sources": { "TRADINGVIEW": "scanner.tradingview.com", "FINVIZ": "...", "YAHOO": "...", "SA": "...", "BLOOMBERG": "..." }, "errors": [ { "provider": "FINVIZ", "code": "...", "message": "..." } ], "warnings": [ "..." ], "degraded": false, // true when the health monitor saw drift/downtime "generated_at": "2026-11-04T10:43:02+00:00" }

One price, and it is the newest print. Every provider that can supply a field is asked. data holds exactly one value per compared field: the reading whose market print is newest. Providers that share the newest instant are the only tie-break candidates, and the documented default order (FINVIZ, TRADINGVIEW, YAHOO, SA, BLOOMBERG) picks between them; Bloomberg is last precisely because its print can be structurally older, and StockAnalysis sits just before it because its coverage is the narrowest of the live feeds. freshness.decision is the machine-readable outcome (newest, tie, no_timestamp), so a caller never has to parse the sentence in reason. Every original reading stays in comparisons.values.

Disagreements are never silently resolved. If the providers report different prices, all values stay in comparisons, the field is named in notice and warnings, and data_provider stays ALL (every asked provider *did* answer; they just disagree). The single value in data is the newest print, and the notice says so.

A field measured against a session baseline is not compared across observations. A day-change percentage or a session volume is derived from the previous close of the session the print belongs to. Finviz in a pre-market session and Yahoo at the prior close will legitimately differ, so such a pair is reported as not_comparable (with the reason in pairs[].not_comparable) instead of being called a provider conflict. Four guards decide that: a 900 s print-time ceiling, equality of the US/Eastern session date even when the prints are seconds apart, a declared feed delay as a boundary of its own (Bloomberg states 15 minutes on equities, so its pairs stop being comparable at that distance), and, for the fields re-derived from the print, an 8 h age ceiling against the clock so a feed that froze with its peers cannot pass. Both readings still appear; the field is listed in warnings as not cross-checked.

Some fields have no shared definition at all. Spot FX has no single official previous close, so each provider derives its own daily roll and the day-change figures answer different questions. On FX, change_percent is therefore always reported from every provider but never compared, with that reason in the pair. Instrument-level, not provider-level: no tolerance can make it a conflict.

A price is a print, and it carries its session. The obvious price field goes stale as soon as the regular session ends: TradingView's scanner close stops moving while its premarket_close keeps streaming, Yahoo's regularMarketPrice freezes while fulldayPrice does not, and StockAnalysis keeps the current extended print in extended_hours. Each provider's live print is therefore resolved before anything is compared, and stock_quote / stock_prices publish the session it belongs to (pre_market, regular, post_market, overnight) with the day change and previous close measured against that same session's baseline, recovered from the print's own change. The label follows the print that was served rather than a nominated leg, so a delayed feed cannot name a session the served number does not belong to. stock_extended_hours independently reads Blue Ocean overnight prints from TradingView's BOATS: socket and Yahoo's quote header. overnight_source names the newest eligible print, while overnight_readings, overnight_comparison and overnight_errors retain provenance and failures. On the same overnight occurrence, the normalized change uses Yahoo's reference_close; TradingView's venue-based change is retained separately as reported_change and reported_change_percent. An absent or cross-occurrence reference leaves the normalized change null. Last night's print survives after 04:00 ET with is_current: false, rather than being passed off as the live pre-market price. stock_quote does not carry overnight itself; use stock_extended_hours.

Extended-hour freshness is pairwise: Yahoo's candle time is parseable UTC ISO, StockAnalysis supplies price_timestamp, and TradingView's regular update_time is never attached to its separate extended print. An undated print therefore leaves only its own pairs not_comparable; a dated Yahoo/StockAnalysis pair can still agree. after_hours_readings retains each provider's price, session, timestamp, baseline and derived change, so the number's definition is visible beside it.

Implementation: reconcile.py (fan-out + comparison), freshness.py (print-time parsing), sessions.py (which session a print belongs to, and which print is live), providers_state.py (envelope + labels).


Symbols are resolved per provider

The same instrument is spelled differently by each upstream, and the differences are not mechanical:

| Instrument | TradingView | Finviz | Yahoo Finance | StockAnalysis | Bloo

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요