Glazecalc

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

• 연결 방식: 클라우드에서 실행
• 전송 방식: Streamable HTTP
• 카테고리: 기타
• 입력해야 할 값: Authorization

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

필요한 것

• 클라우드에서 실행설치할 것 없음. 인터넷으로 연결돼요

어떤 앱을 쓰세요?

claude mcp add --transport http glazecalc https://glazecalcapp.com/mcp --header 'Authorization: your-value'

{
  "mcpServers": {
    "glazecalc": {
      "url": "https://glazecalcapp.com/mcp",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

{
  "servers": {
    "glazecalc": {
      "type": "http",
      "url": "https://glazecalcapp.com/mcp",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

직접 입력할 값

• Authorization 비밀 HTTP header
  Only for your own saved records, and only if your app does not connect through Glazecalc sign-in: "Bearer " and a personal access token made on your Glazecalc account page, read only or read and chan…

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

• search_materials

  Finds ceramic raw materials (feldspars, clays, frits, fluxes) and, if asked, colorants in Glazecalc's library by name, alias or maker. Use it to find the exact name the other tools take.

• get_material

  One material from Glazecalc's library: its oxides, loss on ignition, whether it is discontinued and what replaces it, where it is sold, hazards and the data sheet it comes from.

• analyze_recipe

  Works out a glaze recipe's unity (Seger) formula, oxide groups, silica to alumina ratio, fired analysis, loss on ignition and calculated thermal expansion, as the Glazecalc app does. stull says where the recipe sits on Stull's chart (1912, as the recipe page draws it): silica and

• check_limits

  Checks a glaze recipe for what is past a recommended limit for its firing (too much boron or alkali, too little alumina, too little or too much clay, rising expansion...) and says what the fired glaze will likely do, as the Glazecalc app does. A cone is checked in the band the re

• convert_cone_temperature

  Converts between a pyrometric cone and its temperature, and between °C and °F. Orton cones run 022 to 42: Glazecalc's figure, from 022 to 15, is Orton's older chart for large cones at 150 °C an hour, and Orton's current figures (self-supporting cones at 15, 60 and 150 °C an hour,

• specific_gravity_water

  Works out a glaze slurry's specific gravity (SG) from the grams 100 mL of it weighs (or takes the SG), then, for a bucket of it and a target SG, the water to add, or to pour off after the glaze settles, as the recipe page's Specific gravity and water does. The water to add needs

• suggest_substitutes

  Finds the discontinued or scarce materials in a recipe and the modern ones that replace them, then suggests amounts that keep the unity formula as near as the materials allow, as the Glazecalc app does. report.closeness says how near the new unity formula comes to the old, oxide

• match_from_materials

  Remakes a glaze recipe from only the materials listed in "have", keeping its unity formula as near as they allow, as Match with what I have does in the Glazecalc app. report.closeness says how near the new unity formula comes to the old, oxide by oxide: close (within 0.02, or 5%

• solve_target

  Makes a glaze recipe, in percent, from the materials given whose unity formula comes as near a target as they allow (Solve for a target in the Glazecalc app). The target is a unity formula (moles; the fluxes are scaled to add up to 1) or an oxide analysis (percent by weight of th

• blend_recipes

  Works out the test tiles of a line blend between recipes a and b (2 to 11 steps), or of a triaxial blend when c is given too (2 to 6 rows, up to 21 tiles), as the Blends page of the Glazecalc app does. Each tile is a mix of the corner recipes, each taken as a percent of its base:

• vary_material

  Shows what one material does to a glaze, by putting more and more of it into a base recipe (an ingredient blend or progression test: whiting 0 to 20, say, in 2 to 11 tiles). With mode "add" (the default) it goes on top of the base, so the recipe grows; with mode "replace" the sam

• compare_recipes

  Compares two glaze recipes side by side: for each, its recipe in percent, key unity formula figures, flux ratio (R2O against RO), silica to alumina, calculated expansion, place on Stull's chart (stull), the names of the limit cautions it has and, with a firing, whether its chemis

• search_guides

  Searches Glazecalc's plain-language guides for potters (glazing from first principles, making a glaze, safe mixing, safety at home with children and pets, firing a kiln, and a companion to John Britt's free glaze course, in English only) in the language asked for, or in English w

• list_recipes

  Lists the glaze recipes saved in your Glazecalc account, newest first, optionally only those whose title or a material matches a search, or whose stated firing includes a cone or names an atmosphere or process ("which of my glazes fire at cone 10 reduction?"). Each lists its stat

• get_recipe

  One recipe from your account: its materials and amounts, colorants, notes, its stated firing (firedAt: the cone scale, the low and optional high cone of the claimed range, the cones actually tested, the atmospheres and processes, and for a temperature the rate and hold; each cone

• list_my_materials

  Lists the materials you have saved in your own Glazecalc account (not the shared library), with their oxides.

• get_shelf

  The materials you marked as on hand in Glazecalc (the shelf that Match with what I have uses).

• match_with_what_i_have

  Remakes one of your recipes, or a recipe you give, from only the materials on your shelf, keeping its unity formula as near as they allow (Match with what I have). report.closeness says how near the new unity formula comes to the old, oxide by oxide, as match_from_materials does.

• list_firings

  Lists the firing logs saved in your Glazecalc account, newest first.

• get_firing

  One firing log from your account: its columns (time, temperature, cone...) and rows, and its notes.

• list_notes

  The notes in your Glazecalc notebook, newest first, optionally only those about one record (a recipe, material or firing log id).

• get_my_settings

  Your Glazecalc settings that matter when talking about glazes: region, temperature scale, cones, language, weight unit, whether lead may be suggested, the limit set recipes are checked against, the currency your prices are in (never the prices), and whether changes made by assist

• create_recipe

  Saves a new glaze recipe in your Glazecalc account, from its base materials and amounts (the library's names, or your own materials'), with optional colorants, notes, firing band and food-surface mark. Glazecalc works out its unity formula, as the recipe page does, and answers wi

• update_recipe

  Changes one of your saved recipes (an id from list_recipes): its title, its base materials and amounts (the unity formula is worked out again), its notes, firing band or food-surface mark. Only what is given changes. The recipe as it was is kept as an earlier version, so the pers

• add_notebook_entry

  Adds an entry to your Glazecalc notebook (the Notebook page), with an optional title: a test result, an observation, a firing to try. With about, it is a note about one of your recipes, materials or firing logs, which list_notes finds by that record's id. Needs an access token th

• add_my_material

  Saves a material of your own in your Glazecalc account (the Materials page) from its oxide analysis in weight percent, as on a data sheet, with its loss on ignition. Recipes can then use it by name. Needs an access token that can read and change your records.

• update_my_material

  Changes one of your own materials (an id from list_my_materials): its name, oxide analysis in weight percent, loss on ignition or notes. Only what is given changes. Recipes already saved keep their own copy of it. The material as it was is kept as an earlier version, so the perso

• add_to_shelf

  Marks materials as on hand (the shelf that Match with what I have uses), by the library's names or your own materials'. The shelf as it was is kept: undo_shelf_change puts it back. Needs an access token that can read and change your records.

• remove_from_shelf

  Takes materials off the shelf of materials on hand, by name. The materials themselves stay. The shelf as it was is kept: undo_shelf_change puts it back. Needs an access token that can read and change your records.

• undo_shelf_change

  Puts back the shelf as it was before its last change (by the website, an access token or an assistant). One step back only: a second call finds nothing to undo until the shelf changes again. Needs an access token that can read and change your records.

• move_to_trash

  Moves one of your recipes, materials, notebook entries or firing logs to the Trash, as removing it on the website does. It can be put back from the Trash on the website for 30 days; nothing is deleted for good. A token moves at most 100 an hour, and none while the Trash is full.

• create_firing_log

  Saves a new firing log in your Glazecalc account (the Firing page): its title, the day, the kiln, the columns kept (time, temperature, cone, atmosphere, comments...) and a row for each reading, as the person dictated them. Add later readings with add_firing_rows. Save only what t

• add_firing_rows

  Adds rows to the end of one of your firing logs (an id from list_firings), in the log's own columns (get_firing gives them): the readings dictated during a firing. The rows already there stay as they are, and the log as it was is kept as an earlier version. At most 500 rows a log

• link_firing

  Links one of your recipes to a firing log it went through, as the recipe page does, and sets what came of it there: the result in the person's words (at most 500 characters), and the cone and atmosphere when they differ from the log. Linked already, it changes only what is given.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

• ! 주의

  제작자와 저장소 일치

  게시자(glazecalcapp.com)가 저장소 소유자(AaronFilson)가 아니에요. 다른 사람이 등록했을 수 있어요

• … 아직 점검 안 함

  계속 관리되고 있음

  아직 GitHub에서 이 저장소를 읽어 오지 않았어요

• … 아직 점검 안 함

  라이선스 있음

  아직 GitHub에서 이 저장소를 읽어 오지 않았어요

• ✓ 통과

  엔드포인트 응답

  258ms 만에 응답(HTTP 200)

• – 해당 없음

  OAuth로 로그인

  로그인 필요 없음

• ✓ 통과

  도구 설명에 숨겨진 지시 없음

  도구 설명 34개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

• 이 카테고리의 다른 서버 32696개 중 0%보다 스타가 많아요
• 이 카테고리의 다른 서버 32696개 중 91%보다 최근에 레지스트리에 공개됐어요
• 기본 점검 결과가 이 카테고리의 다른 서버 32696개 중 37%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

제작자의 README