할 수 있는 일
Gleap 공식 MCP 서버로, 티켓, 연락처, CRM, 도움말 센터, 지원 통계를 관리합니다. OAuth로 로그인합니다.
제작자 설명을 자동 번역 · 팀 확인 전
- 연결 방식 클라우드에서 실행
- 계정 또는 키 연결할 때 서비스에 로그인(OAuth)
- 분류 마케팅 및 소셜 미디어
제작자의 원래 설명
Gleap's official MCP server: tickets, contacts, CRM, help center and support stats. OAuth sign-in.함께 쓰기
이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다
이 순위인 이유
이 항목은 “AI와 연결되는 앱” 탭에 있으며, 이 탭은 별 없이 다음 순서로 정렬합니다
| 1. Claude 커넥터 디렉터리에 있음 | 아니요 | |
|---|---|---|
| 2. 팀이 직접 써 봄 | 아니요 | |
| 3. 태국 사용자에게 맞음 | 아니요 | |
| 4. 별을 뺀 사용량 | 20/100 | 인기 0 · 최신성 12 · 응답 중 8 · 사용자 좋아요 +0 |
| 5. 등록일 | 2026-11-21 |
사용자 좋아요: 0 · 순위에 최대 5점(1인 1점) 더해지며 돈으로 살 수 없습니다.
품질: 기본 점검 4/4개 통과(표시만, 정렬에는 안 씀)
설치
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Gleap 설치해 줘. https://mcp.popnx.com/i/gleap-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 4/4 통과 · 내가 묻는 내용은 제작자 서버(mcp.gleap.ai)를 거쳐요 · ✓ 명령 확인 2026년 11월 21일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있어요 · 약 2분
키 필요 없음, 설치 필요 없음 · claude.ai나 데스크톱 앱에서 한 번 설정하면 채팅에서 쓸 수 있어요 · 무료 계정은 1개까지 · Team/Enterprise는 소유자(Owner)가 추가
이 버튼을 누르면 Claude가 미리 채워진 connector 추가 창을 엽니다
이름과 주소가 채워져 있어요. 확인하고 Add를 누르세요 · 로그인하지 않았다면 Claude가 먼저 로그인을 요청해요
Claude가 찾은 로그인 설정 화면에서 Continue를 누르고 · Authentication은 제작자 안내대로(Sign in now, Sign in when needed, No sign in) 고른 뒤 Add를 누르세요
버튼이 안 되나요? 직접 입력하기
CustomizeConnectors
“Add” → “Custom” → “Web”를 누르고 이 2칸 채우기
여기서 복사해 Claude의 같은 이름 칸에 붙여 넣고 Continue를 누르세요
Name · 이름GleapRemote MCP server URL · 주소https://mcp.gleap.ai/mcp채팅에서 켜기
+ConnectorsGleap
해 보기
Gleap을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Gleap을 쓰고 있다고 하거나 답에 Gleap 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT 연결은 요금제에 따라 달라요
전체 MCP: 웹 ChatGPT Business, Enterprise, Edu · Pro: 읽기/가져오기 권한으로 연결, 데이터를 바꾸는 도구는 안 될 수 있어요 · Plus: 공식 문서 미확인, 플러그인 화면에 사용자 지정 MCP 추가 항목이 보이면 시도해 볼 수 있어요 · 웹만
웹 ChatGPT에서 MCP 추가 페이지 열기
Plugins+Add custom MCP server
이름과 주소 입력
이름을 넣고 Connection에 주소를 붙여 넣은 뒤 경고에 체크하고 Create as a plugin을 누르세요
Name · 이름GleapConnection · 주소https://mcp.gleap.ai/mcp채팅에서 Gleap 고르기
새 채팅을 열고 입력 전에 플러그인 목록에서 Gleap을 고르세요
해 보기
Gleap을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ ChatGPT가 Gleap을 쓰고 있다고 하거나 답에 Gleap 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 OpenAI 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Claude Code에 연결할 수 있어요 · 약 2분
키 필요 없음, 설치 필요 없음
터미널 열기
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
이 명령을 붙여 넣고 Enter
claude mcp add --transport http --scope user gleap https://mcp.gleap.ai/mcpClaude Code에서 /mcp 입력
Gleap이 목록에 있고 연결됨으로 보이면 돼요
해 보기
Gleap을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Gleap을 쓰고 있다고 하거나 답에 Gleap 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있어요 · 약 2분
키 필요 없음, 설치 필요 없음
Cursor에서 AI 채팅을 Agent 모드로 열기
해 보기
Gleap을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Gleap을 쓰고 있다고 하거나 답에 Gleap 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있어요 · 약 2분
키 필요 없음, 설치 필요 없음
VS Code에서 AI 채팅을 Agent 모드로 열기
해 보기
Gleap을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Gleap을 쓰고 있다고 하거나 답에 Gleap 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
웹으로 연결하는 앱용 주소
https://mcp.gleap.ai/mcpJSON 설정은 아래 “개발자용”에 있어요
개발자용: 터미널 명령과 JSON 설정
웹으로 연결
Claude Code
claude mcp add --transport http --scope user gleap https://mcp.gleap.ai/mcpCursor (~/.cursor/mcp.json)
{
"mcpServers": {
"gleap": {
"url": "https://mcp.gleap.ai/mcp"
}
}
}VS Code (mcp.json)
{
"servers": {
"gleap": {
"type": "http",
"url": "https://mcp.gleap.ai/mcp"
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
한눈에 보기
- 주간 다운로드i
- npm/PyPI에 없음
- 확인된 도메인
- ✓ gleap.ai
- 연결 방식
- 클라우드에서 실행
- 전송 방식
- streamable-http
- 최신 버전i
- 1.0.1
- 카테고리i
- 마케팅 및 소셜 미디어
- 레지스트리 공개i
- 2026년 11월 21일
- 코드 마지막 변경i
- 2026년 11월 21일
- 마지막 확인
- 2026년 11월 21일
- 제작자
- GleapSDK
- 웹사이트
- www.gleap.ai
- 레지스트리 상태
- 활성
어떤 앱에서 쓸 수 있나요
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
인터넷으로 연결하는 앱
ClaudeChatGPTGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatOpen WebUIRaycast
할 수 있는 일
서버가 도구 목록을 보여 주기 전에 로그인을 요구해요.
기본 점검i
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 22일 점검
- ✓ 통과
제작자와 저장소 일치
레지스트리 이름이 도메인 gleap.ai 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)
- ✓ 통과
계속 관리되고 있음
코드 마지막 변경: 어제
- – 해당 없음
라이선스 있음
해당 없음: gleap.ai 소유자가 직접 운영하는 클라우드 서버라 저장소 코드를 실행하지 않아요
- ✓ 통과
엔드포인트 응답
497ms 만에 응답(HTTP 401)
- ✓ 통과
OAuth로 로그인
OAuth 로그인을 지원한다고 밝혀서, AI 앱이 로그인 화면으로 안내해 줘요
- … 아직 점검 안 함
도구 설명에 숨겨진 지시 없음
아직 점검하지 않았어요. 엔드포인트를 점검할 때 도구 목록을 읽어요
제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/gleap-mcp)토론
질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
사용자 리뷰
아직 리뷰가 없어요
마케팅 및 소셜 미디어 카테고리의 다른 서버와 비교i
- 이 카테고리의 다른 서버 4366개 중 0%보다 스타가 많아요
- 이 카테고리의 다른 서버 4366개 중 97%보다 최근에 레지스트리에 공개됐어요
- 기본 점검 결과가 이 카테고리의 다른 서버 4366개 중 99%와 같거나 더 좋아요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
자주 묻는 질문
Gleap, 안전한가요?
해당하는 기본 점검 4개 중 4개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
어떤 키나 코드가 필요한가요?
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?
제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.
아직 관리되고 있나요?
GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(1.0.1)은 어제 레지스트리에 올라왔어요.
어떤 앱에서 쓸 수 있나요?
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되므로 원격 MCP를 받는 앱에서도 쓸 수 있어요. 예: 웹 ChatGPT(Business 이상은 전체 MCP, Pro는 읽기 전용).
대신 쓸 수 있는 건 뭐가 있나요?
같은 카테고리에는: PostHog, Relaticle, ChatbotX, X (Twitter) MCP Server by Xquik, Betterlytics
비슷하게 동작하는 다른 것
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
PostHog
Query analytics, manage feature flags and experiments, and investigate errors in PostHog.
Relaticle
Open-source CRM your AI agents can write to: companies, people, opportunities, tasks and notes.
ChatbotX
Omnichannel customer messaging, CRM contacts, flows, sequences, broadcasts, and AI automation.
X (Twitter) MCP Server by Xquik
Xquik is the world's fastest and cheapest X (Twitter) data API with the most complete X data.
Betterlytics
Query your Betterlytics web analytics from AI agents: traffic, funnels, journeys, errors, uptime.
| 이 항목 Gleap | PostHog | Relaticle | ChatbotX | X (Twitter) MCP Server by Xquik | Betterlytics | |
|---|---|---|---|---|---|---|
| 실행 위치 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 예 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 4/4 | 4/4 | 4/4 | 4/4 | 4/4 | 4/4 |
| 라이선스 | MIT | NOASSERTION | AGPL-3.0 | NOASSERTION | MIT | AGPL-3.0 |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 README
README 열기
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Gleap MCP Server
Connect your Gleap workspace to Claude and other AI assistants via the Model Context Protocol. Manage tickets, contacts, help center articles, and statistics using natural language.
Prerequisites
- A Gleap account with at least one project
- An API key (Gleap → Settings → Developer → API keys) and your project (the Project ID from Settings → Project → General, or the project's internal ID)
Local development
Install dependencies, then build and run the server locally:
npm install # install dependencies
npm run build # compile TypeScript to build/ npm start # run the compiled server (node build/index.js)
Use npm run dev to recompile automatically on file changes while you work.
Node.js 22 (engines in package.json). Before opening a PR, run npm run typecheck, npm test and npm run build; CI runs them too. Coding agents: see AGENTS.md.
Connecting to Claude (OAuth — recommended)
- In Claude, open Settings → Connectors and add a custom connector
- Enter the Gleap MCP server URL of the region your Gleap workspace is hosted in:
- EU:
https://mcp.gleap.ai/mcp - US:
https://mcp.us.gleap.ai/mcp
- Click Connect — you'll be redirected to Gleap to authorize access
- Select the project you want Claude to access and approve the requested scopes
- Done. Claude can now read and manage your Gleap workspace with your role in that project.
No API key or client ID setup is required. The OAuth flow handles authentication automatically.
Alternative: API key auth (for clients that support custom headers)
Send these headers with every request:
| Header | Value |
|---|---|
x-gleap-api-key | Your Gleap API key |
x-gleap-project-id | Your project: the Project ID (Settings → Project → General) or its internal ID |
Coding sessions
A coding agent working a Gleap ticket names its coding session, with the sessionId argument of a tool (report_progress, send_message, …) or for every call with the header x-gleap-session-id (the client sets it from .gleap/session.json, a Kai Code sandbox from its MCP config; OAuth and API-key connections alike). The server then sends X-Gleap-Session-Id with every write of that tool call (reads go without it), plus X-Gleap-Session-Explicit: 1 when the id came from the tool's own sessionId argument (Gleap refuses every write that explicitly names a stopped session): Gleap books the writes to the session's agent (an agent's reply does not stop the agent the way a teammate's does) and checks each write against the session (the episode guard). A session id that does not count for the write (another project's session, one not linked to the written ticket, or one left behind in .gleap/session.json) is ignored: the write is then the caller's own, as without a session. The results then also carry what Gleap says about the session, whatever the tool:
stop: true: the ticket is no longer the session's (a teammate took it over, replied to the customer, unassigned the agent or stopped the session). The result is only the STOP instruction, withstructuredContent.gleapStop: true: the field Kai Code's runner and the Gleap plugin act on (never words in a result). Only this server sets it; a field of that name in API data is dropped.newCustomerMessages: what the customer wrote that the agent has not been shown, listed after the result.- A send written before the customer's newest message is refused (409) with those messages (
staleThread: truein the result): the agent reads them, adjusts and sends once more.
Without a session id nothing changes: no header, no extra lines.
Available Tools
| Tool | Description |
|---|---|
search_tickets | Full-text search across tickets |
find_tickets | Filter tickets by status, priority, assignee, tags, date |
get_ticket | Get a specific ticket by ID |
create_ticket | Create a new ticket |
get_ticket_types | List ticket types with their custom fields, status lanes and priorities |
get_ticket_messages | Get the full conversation history (messages) for a ticket |
get_ticket_activity_log | Get the console logs, network requests and click trail the SDK captured with a ticket. Coding agents call it on bug reports before reproducing, to see the console errors, failed requests and the user's clicks. Headers are never returned, secrets are redacted and long logs are trimmed (errors and failed requests first); section and search narrow it |
send_message | Reply to a customer or add an internal note (Markdown). Agent workflows: the agent asks its operator in its own conversation (an instruction to answer or update the customer is the approval), then sends; with sessionId the reply is the session agent's and Gleap refuses a stale one (stale_thread, with the new messages) or one after a stop |
draft_reply_to_composer | Stage a drafted reply in the ticket's dashboard composer for a person to review, edit and send. Sends nothing. For a person's own AI client, also when a .gleap/session.json from another ticket is still around: Gleap refuses Kai runs and the coding session working that ticket (410), which ask their operator and send with send_message |
report_progress | Report the fix status on the Gleap coding session you were started from (deeplink hand-off loop; session-scoped since 2026-08), the same snapshot every runtime reports: status (queued, working, needs_input, completed, failed, cancelled), step while working (investigating, reproduced, fixing), a one-line message, question with needs_input (kind, prompt, options, audience customer or team), customerLine (one sentence of status the customer may read), howSolved (one paragraph on how the ticket was solved, sent with the last report; it feeds Kai Support's learning), agentKind, agentName and device. The older phase still works: status wins, and a report with only status also sends the phase it stands for, for a Server from before the fix status. Registers PRs (completed with prUrl) and takes the two fix messages: customerUpdateMessage (sent right away) and customerShipMessage (sent when the fix is live, by the project's post-merge setting); the result says what happened to each. The ticket is done when the customer confirms or 24 hours after the last answer without a reply, not at the merge. The result also carries stop, newCustomerMessages (see Coding sessions) and the hook block for .gleap/session.json |
update_plan | Live checklist on the Gleap coding session (sessionId or ticketId, like report_progress): the whole list each call, statuses pending/in_progress/completed/cancelled |
wrap_up | End-of-turn card on the session: recap, at most one question, 0-2 actions (merge_pr, open_pr, review_changes, open_preview; send_customer_update is removed and refused) |
share_screenshot | Post a screenshot (optionally a before/after pair) into the session thread. Returns the curl -T upload commands to run (the server cannot read local files); imageBase64 (≤ 1.5 MB each) for agents without a shell |
publish_artifact | Publish a self-contained HTML page (≤ 1 MB) into the session thread; artifactId publishes a new version |
get_agent_workflow | The Gleap ticket workflow (fix, answer, feature) as Markdown, plus the .gleap/session.json content for the Gleap plugin |
get_ticket_screenshot | The ticket's SDK screenshot as image content (Gleap file hosts only, ≤ 2 MB) |
describe_database | The team's own databases Kai Code may read (read-only, this ticket's customer only): tables, columns, masked columns, query format. Kai Code runs on a ticket only (the run key's ticket pin); refused for every other connection |
query_database | One read-only query (a SQL SELECT or a MongoDB JSON request) on the team's database, kept to the ticket's customer (scope: team across customers always waits for a data owner); at most 200 rows, sensitive columns masked. It may wait for a person's approval (status: pending with a queryId). Values from results never go into code, tests, fixtures, commits or PRs. Kai Code runs on a ticket only |
get_query_result | The status of a query that waited for approval, and its rows once a data owner let it run (kept a day). Kai Code runs on a ticket only |
get_workflows | List all workflows in the project (live and draft), with their channels, whether Kai Support answers in them (kaiAnswers) and the agent they pass to |
get_workflows_available_for_ticket | List the live workflows startable on a specific ticket |
run_ticket_workflow | Manually start a workflow on a ticket (the "Start a workflow" action) |
get_setup_status | Where the project stands for AI support: the Hard tickets settings (hardTickets: on a click or automatically, on Kai Code Cloud or a Bridge machine; ticketDone: thank-you and review ask), the default team, and (admins of a new workspace) the signup steps left |
get_agents | The project's AI agents: name, live or draft, customer-facing or team |
set_ai_mode | Removed (stub for one release): AI-first and AI-assisted are gone; does nothing and points to update_workflow and the Hard tickets settings |
start_kai_resolve | Removed (stub for one release): Kai Resolve is Kai Support's hard-ticket mode, started with Work on it on the ticket or automatically; does nothing and says so |
update_workflow | Change which channels a workflow runs on (addChannels / removeChannels) and whether it is live; never its steps |
get_workflow_build_options | What a workflow can use, by name: teams, tags, Your API endpoints, webhooks, integrations, sequences, contact fields, message variables |
get_workflow_steps | One workflow step by step, with path ids and step numbers, what could go live and the hashes publish_workflow_draft needs |
create_workflow_draft | Build a new conversation workflow from steps; always a draft, no customer gets it |
change_workflow_draft | Edit a workflow's name, trigger, channels, audience and steps; a change to a live workflow waits as a draft |
publish_workflow_draft | Make a draft live or apply a waiting change, for the version the person agreed to (draftHash), with the editor's publish checks |
create_team / update_team | Create a team, rename it, add or remove members (others stay), change how it hands out tickets |
set_default_team | The team agents escalate to when nobody else is named (admins) |
search_contacts | Full-text search across contacts |
get_contacts | Filter contacts by email, name, company |
get_contact | Get a specific contact by ID |
create_contact | Create a new contact |
get_companies | List/search the project's companies (organisations) |
get_company | Get a company by its external companyId, incl. custom data |
update_company | Create or update a company (name, plan, value, custom data) |
get_pipelines | List CRM pipelines with their stages |
get_pipeline | Get a pipeline incl. stages and fields (fieldIds for entry values) |
get_pipeline_stats | Per-stage counts and field aggregations (e.g. sum of deal values per stage) plus pipeline totals |
get_pipeline_entries | List a pipeline's entries, optionally for one stage |
get_pipeline_entry | Get one entry with its pipeline context |
add_pipeline_entry | Add a company/contact to a pipeline (stage + initial values) |
move_pipeline_entry | Move an entry to another stage |
update_pipeline_entry_values | Update an entry's field values (merge; null clears) |
remove_pipeline_entry | Remove an entry from a pipeline (record itself is untouched) |
get_record_pipelines | Which pipelines a company/contact is on |
| get_help_center_sites | List the projec