프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요 로그인

Migros MCP

제작자: herp75버전 0.6.1i★ 0i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.herp75/migros-mcp

설치 방법

할 수 있는 일

Migros Switzerland: products, stores, recipes; with login basket, lists, orders, Cumulus

제작자가 쓴 원문

  • 연결 방식 내 컴퓨터에서 실행
  • 계정 또는 키 MIGROS_PASSWORD, MIGROS_TOTP_SECRET 필요
  • 분류 온라인 쇼핑몰 및 결제

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수12/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Migros MCP 설치해 줘. https://mcp.popnx.com/i/herp75-migros-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

Migros MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server Migros MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "migros": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "MIGROS_PASSWORD", "-e", "MIGROS_TOTP_SECRET", "ghcr.io/herp75/migros-mcp:0.6.1" ], "env": { "MIGROS_PASSWORD": "your-value", "MIGROS_TOTP_SECRET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) MIGROS_PASSWORD, MIGROS_TOTP_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Migros MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. Migros MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  4. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "migros": {
          "command": "docker",
          "args": [
            "run",
            "-i",
            "--rm",
            "-e",
            "MIGROS_PASSWORD",
            "-e",
            "MIGROS_TOTP_SECRET",
            "ghcr.io/herp75/migros-mcp:0.6.1"
          ],
          "env": {
            "MIGROS_PASSWORD": "your-value",
            "MIGROS_TOTP_SECRET": "your-value"
          }
        }
      }
    }

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude를 끄고 다시 열기

  6. 해 보기

    Migros MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Migros MCP을 쓰고 있다고 하거나 답에 Migros MCP 도구 이름이 나오면 연결된 거예요

추가 설정 1개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • MIGROS_EMAIL Migros 로그인 이메일(계정 없이 도구만 사용하려면 생략)
    영어 원문 보기Migros login e-mail (leave out to only use the tools without an account)

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Migros MCP에 연결할 수 없어요

Migros MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Migros MCP에 연결되는 앱 쓰기

  • Migros MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • Migros MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
  • Migros MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
  • Migros MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

B · 온라인 쇼핑몰 및 결제에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

Migros MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Migros MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user migros --env MIGROS_PASSWORD=your-value --env MIGROS_TOTP_SECRET=your-value -- docker run -i --rm -e MIGROS_PASSWORD -e MIGROS_TOTP_SECRET ghcr.io/herp75/migros-mcp:0.6.1 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) MIGROS_PASSWORD, MIGROS_TOTP_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Migros MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. Migros MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  4. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user migros --env MIGROS_PASSWORD=your-value --env MIGROS_TOTP_SECRET=your-value -- docker run -i --rm -e MIGROS_PASSWORD -e MIGROS_TOTP_SECRET ghcr.io/herp75/migros-mcp:0.6.1

    Enter 전에 “your-value”를 내 키로 바꾸세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude Code에서 /mcp 입력

    Migros MCP이 목록에 있고 연결됨으로 보이면 돼요

  6. 해 보기

    Migros MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Migros MCP을 쓰고 있다고 하거나 답에 Migros MCP 도구 이름이 나오면 연결된 거예요

추가 설정 1개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • MIGROS_EMAIL Migros 로그인 이메일(계정 없이 도구만 사용하려면 생략)
    영어 원문 보기Migros login e-mail (leave out to only use the tools without an account)

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

Migros MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Migros MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "migros": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "MIGROS_PASSWORD", "-e", "MIGROS_TOTP_SECRET", "ghcr.io/herp75/migros-mcp:0.6.1" ], "env": { "MIGROS_PASSWORD": "your-value", "MIGROS_TOTP_SECRET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) MIGROS_PASSWORD, MIGROS_TOTP_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Migros MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. Migros MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    Migros MCP 설정에서 MIGROS_PASSWORD, MIGROS_TOTP_SECRET가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Cursor에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    Migros MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Migros MCP을 쓰고 있다고 하거나 답에 Migros MCP 도구 이름이 나오면 연결된 거예요

추가 설정 1개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • MIGROS_EMAIL Migros 로그인 이메일(계정 없이 도구만 사용하려면 생략)
    영어 원문 보기Migros login e-mail (leave out to only use the tools without an account)

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

Migros MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Migros MCP을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "migros": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "-e", "MIGROS_PASSWORD", "-e", "MIGROS_TOTP_SECRET", "ghcr.io/herp75/migros-mcp:0.6.1" ], "env": { "MIGROS_PASSWORD": "your-value", "MIGROS_TOTP_SECRET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) MIGROS_PASSWORD, MIGROS_TOTP_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Migros MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. Migros MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    Migros MCP 설정에서 MIGROS_PASSWORD, MIGROS_TOTP_SECRET가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. VS Code에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    Migros MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Migros MCP을 쓰고 있다고 하거나 답에 Migros MCP 도구 이름이 나오면 연결된 거예요

추가 설정 1개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • MIGROS_EMAIL Migros 로그인 이메일(계정 없이 도구만 사용하려면 생략)
    영어 원문 보기Migros login e-mail (leave out to only use the tools without an account)

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Migros MCP을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user migros --env MIGROS_PASSWORD=your-value --env MIGROS_TOTP_SECRET=your-value -- docker run -i --rm -e MIGROS_PASSWORD -e MIGROS_TOTP_SECRET ghcr.io/herp75/migros-mcp:0.6.1

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "migros": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "MIGROS_PASSWORD",
        "-e",
        "MIGROS_TOTP_SECRET",
        "ghcr.io/herp75/migros-mcp:0.6.1"
      ],
      "env": {
        "MIGROS_PASSWORD": "your-value",
        "MIGROS_TOTP_SECRET": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "migros": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "MIGROS_PASSWORD",
        "-e",
        "MIGROS_TOTP_SECRET",
        "ghcr.io/herp75/migros-mcp:0.6.1"
      ],
      "env": {
        "MIGROS_PASSWORD": "your-value",
        "MIGROS_TOTP_SECRET": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "migros": {
      "type": "stdio",
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "-e",
        "MIGROS_PASSWORD",
        "-e",
        "MIGROS_TOTP_SECRET",
        "ghcr.io/herp75/migros-mcp:0.6.1"
      ],
      "env": {
        "MIGROS_PASSWORD": "your-value",
        "MIGROS_TOTP_SECRET": "your-value"
      }
    }
  }
}

직접 입력할 값

  • MIGROS_EMAIL env
    Migros 로그인 이메일(계정 없이 도구만 사용하려면 생략)
    영어 원문 보기Migros login e-mail (leave out to only use the tools without an account)
  • MIGROS_PASSWORD 비밀 필수 env
    Migros 비밀번호(다른 곳에서 사용하지 않는 것을 사용하세요)
    영어 원문 보기Migros password (use one you use nowhere else)
  • MIGROS_TOTP_SECRET 비밀 필수 env
    2단계 인증 설정 키이므로 인증 코드를 전혀 묻지 않습니다(두 번째 비밀번호처럼 작동합니다).
    영어 원문 보기2FA setup key, so no code is ever asked for (works like a second password)

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
npm/PyPI에 없음
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.6.1
레지스트리 공개i
2026년 11월 13일
코드 마지막 변경i
2026년 11월 17일
제작자
herp75
패키지
oci: ghcr.io/herp75/migros-mcp:0.6.1
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 herp75 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 3일 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

확인 안 함: 버전이 있는 npm과 PyPI 패키지만 확인할 수 있습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/herp75-migros-mcp.svg)](https://mcp.popnx.com/en/servers/herp75-migros-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

온라인 쇼핑몰 및 결제 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 2985개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 2985개 중 80%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 2985개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Migros MCP, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: MIGROS_PASSWORD, MIGROS_TOTP_SECRET

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 3일 전 변경됐고, 최신 버전(0.6.1)은 7일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Stripe MCP, flightclaw, Trade It, Marketplace Ad Pros: Amazon Ads & Seller Central, idealo MCP Server

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Stripe MCP

MCP server integrating with Stripe - tools for customers, products, payments, and more.

제작자: stripe널리 사용됨★ 2.1천13개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · stripe.com

flightclaw

Search ~300 airlines and book flights with a checkout link. OAuth sign-in by email code.

제작자: flightclaw성장 중★ 872개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · flightclaw.com

Trade It

Connect brokerage accounts to AI assistants: holdings, orders, asset lookup, and approved trading.

제작자: trade-it-inc성장 중★ 6235일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · tradeit.app

idealo MCP Server

Search products, compare prices and discover deals across 6 European markets with your AI assistant.

제작자: idealo초기★ 286개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · mcp.idealo.com
비슷한 항목과 비교
이 항목
Migros MCP
Stripe MCPflightclawTrade ItMarketplace Ad Pros: Amazon Ads & Seller Centralidealo MCP Server
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요예아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요예아니요아니요아니요아니요
기본 점검3/34/44/45/54/44/4
라이선스MITMITMITCC0-1.0MITMIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

migros-mcp

Lets Claude (and other AI apps) search Migros products, recipes, stores and promotions. Sign in, and it can also manage your basket and look up your orders, receipts and Cumulus points.

Unofficial. Not made or supported by Migros. It uses the same behind-the-scenes addresses as the Migros website, so it can break whenever Migros changes them. Use at your own risk.

Install

This is a fork. herp75/migros-mcp is lewpgs/migros-mcp with security hardening, live tests and more tools (see the CHANGELOG). It comes as a Docker image, ghcr.io/herp75/migros-mcp, and is listed in the MCP Registry as io.github.herp75/migros-mcp. The npm package migros-mcp and the Claude Desktop installer migros-mcp.mcpb are upstream's version, not this one.

It runs on your own computer, so it works in desktop apps that can start a program: Claude Desktop, Claude Code, Cursor and similar. It doesn't work on claude.ai in a browser or in the Claude phone apps. You need Docker or Podman.

Your login, in a file only you can read. Skip this to only search.

install -m 600 /dev/null ~/.config/migros-mcp.env

"${EDITOR:-nano}" ~/.config/migros-mcp.env

MIGROS_EMAIL=you@example.com MIGROS_PASSWORD=your-password

One line each, no quotes. $, # and quotes in the password are fine (Docker reads the file as written). For 2FA without being asked for codes, add MIGROS_TOTP_SECRET=... (see Your Migros account).

The saved login lives in the Docker volume migros-mcp, so it survives restarts. That matters: Migros blocks computers that sign in too often.

Claude Code
claude mcp add migros -- docker run -i --rm \

--env-file ~/.config/migros-mcp.env -v migros-mcp:/config \ ghcr.io/herp75/migros-mcp:0.6

Leave out --env-file … to only search. With Podman, write podman instead of docker.

Claude Desktop, Cursor and other apps

Add this to the app's MCP config file, with your home folder in the path:

  • Claude Desktop: Settings > Developer > Edit Config
  • Cursor: ~/.cursor/mcp.json (all projects) or .cursor/mcp.json (one project)
{

"mcpServers": { "migros": { "command": "docker", "args": [ "run", "-i", "--rm", "--env-file", "/home/you/.config/migros-mcp.env", "-v", "migros-mcp:/config", "ghcr.io/herp75/migros-mcp:0.6" ] } } }

Other apps (VS Code, Windsurf, Zed and so on) run the same command but lay out their config a little differently. Check your app's MCP instructions.

Checking the image (optional)

Each image is signed with cosign, keyless, by the release workflow of this repository:

cosign verify ghcr.io/herp75/migros-mcp:0.6 \

--certificate-identity-regexp '^https://github.com/herp75/migros-mcp/\.github/workflows/(docker|release)\.yml@' \ --certificate-oidc-issuer https://token.actions.githubusercontent.com

Check that it works

Start a new chat and ask: *"Search Migros for oat milk."*

Your Migros account

Optional. Without it, product search, product details, stock, stores, promotions and recipes all work.

With it, Claude can also see and change your basket and shopping lists, look up your orders, in-store receipts and Cumulus points, and put Cumulus coupons on your card. It never places an order or pays. It gives you a checkout link, and you finish on migros.ch yourself.

What to enter depends on how you sign in to migros.ch:

You sign in withEnter
Email and passwordEmail and password. Done. Use a password you use nowhere else: the server keeps it in a file on your computer.
Email, password and a 6-digit code from an authenticator appEmail and password. When Claude needs to sign in, it asks you for the current code. That only happens when Migros ends the saved login, not in every chat.
The same, but you never want to be asked for a codeEmail, password and your setup key (see below).

Finding your setup key (only needed for the last option)

The setup key (also called the TOTP secret) is not the 6-digit code. It's the long code, about 32 letters and digits like JBSWY3DPEHPK3PXP..., that you got when you first added Migros to your authenticator app. It never changes.

  • Saved in a password manager? Open the Migros entry and look for an option like "View one-time password secret". If you see a link starting with otpauth://, the setup key is the part after secret=.
  • Not saved anywhere? Migros only shows it while you set up 2FA. In your Migros account settings, remove 2FA and set it up again. Under the QR code is a box saying *"Or enter the following key in the authenticator app"*. Copy that key before you finish, and add the new entry to your authenticator app.

Add it as one more line, MIGROS_TOTP_SECRET=..., in ~/.config/migros-mcp.env (see Install).

Only codes from an authenticator app work. If your account uses a passkey only, or codes by SMS, add an authenticator app in your Migros account settings first.

Settings

All settings are environment variables. With Docker, put them in ~/.config/migros-mcp.env (see Install). None is required.

VariableDefaultWhat it does
MIGROS_EMAILnoneYour Migros login email. Without email and password, only the tools without an account work.
MIGROS_PASSWORDnoneYour Migros password. Only ever sent to login.migros.ch.
MIGROS_TOTP_SECRETnoneThe 2FA setup key, so you're never asked for a code. Works like a second password: keep it as safe. With it in the same file as the password, anyone who gets that file has both factors.
MIGROS_MCP_UPDATE_CHECKon; off in the imagefalse, 0, off or no turns off the daily check for a newer release of this fork on GitHub (only when run from source).
MIGROS_API_WRAPPER_USERAGENTbuilt inOverrides the browser name sent with the searches that need no account. Rarely needed.
XDG_CONFIG_HOME (Linux), APPDATA (Windows)the usual place; /config in the imageWhere the saved login (migros-mcp/session.json) is kept. On a Mac it's always ~/Library/Application Support/migros-mcp/.

For development only: MIGROS_TEST_EMAIL, MIGROS_TEST_PASSWORD, MIGROS_TEST_TOTP_SECRET, MIGROS_LIVE_ENV_FILE and MIGROS_LIVE_SESSION_DIR (see Development).

What you can ask

Without an account:

  • "Search Migros for protein bars"
  • "What's the nutrition info for this product?"
  • "Find Migros stores near Zurich"
  • "What promotions does Migros have right now?"
  • "Find me a risotto recipe"

With your account:

  • "What's in my Migros basket?"
  • "Add 2 litres of milk to my basket"
  • "Add the ingredients for this recipe to my basket"
  • "Show me my last 5 Migros orders"
  • "How much did I spend at Migros last month?"
  • "Which Migros stores did I shop at last month, and for how much?"
  • "Which Cumulus coupons do I have? Activate the one for coffee."
  • "Make a new shopping list for the weekend"
  • "Give me the link to finish my checkout"

Updating

:0.6 follows the newest 0.6.x release (fixes only). To get it, pull the image and restart the app:

docker pull ghcr.io/herp75/migros-mcp:0.6

New features come with a new minor version (:0.7): change the tag in your config. Releases are listed on the releases page and in the CHANGELOG. The image doesn't check for updates itself (MIGROS_MCP_UPDATE_CHECK is off in it).

Privacy and safety

  • Your email, password and setup key are only ever sent to Migros' own login page (login.migros.ch). A 6-digit code you give Claude is used for that one sign-in and never stored or logged.
  • Your password and setup key sit in ~/.config/migros-mcp.env, readable only by you, not in the app's config file.
  • Once you're signed in, the saved login (cookies and an access token) stays on your computer, in session.json in the Docker volume migros-mcp. docker volume rm migros-mcp signs you out. Inside the volume, only the server's user can read it. (Run without Docker, it's in ~/.config/migros-mcp/ on Linux, ~/Library/Application Support/migros-mcp/ on a Mac, %APPDATA%\migros-mcp\ on Windows.)
  • Your email, password, setup key, cookies and access token are masked in error messages.
  • Tools that change your basket are marked as such, so your app can ask you before running them. Leave that approval on.
  • Give Claude the 6-digit code yourself. Don't let an AI that can act on your account also read your codes (for example from a password manager): then a text it reads could get it to sign in, and the second factor protects nothing.
  • Product texts, recipes and order data come from Migros and other people. migros-mcp tells the AI to treat them as information, not as instructions.
  • It never places orders or pays. get_checkout_link gives you a link, and you finish on migros.ch.
  • Found a security problem? See SECURITY.md.

Troubleshooting

  • "Too many requests" or other sign-in errors. Migros blocks computers that sign in too often. When that happens, migros-mcp stops trying for a while on its own (30 seconds at first, longer if it keeps happening) and keeps using your current login while it's still valid. The error says until when. Wait until then before trying again. Restarting the app over and over, or a wrong password, makes it worse.
  • Something that used to work fails. Migros may have changed its website. Update to the newest version (see Updating), and if it still fails, open an issue.

Tools

These are what Claude calls behind the scenes. You don't need them to use it.

The Kind column says what a tool does to your account: *reads*, *changes* (nothing is lost) or *deletes* (removes or overwrites something). Your app uses this to decide when to ask you first. Keep that approval on for anything that isn't *reads*.

Without an account (all *reads*)

ToolWhat it does
search_productsSearch products by name or keyword, including ones sold only online (such as "Partner" products).
get_product_detailsNutrition, ingredients, allergens, price and ratings. Online-only products also get their online price and a Partner flag.
get_stockWhether a product is in stock at a given store. Updated once a day. "Unknown" when Migros has no data.
get_categoriesAll Migros product categories.
search_storesStores near a place, with addresses and opening hours.
get_promotionsCurrent promotions and deals.
search_recipesSearch Migusto, Migros' recipe site, by text and/or ingredients. German, French and Italian only.
get_recipe_detailsA full recipe: ingredients, steps, photos, nutrition.
get_recipe_productsThe Migros products Migusto suggests for a recipe, with name and price, ready for add_to_basket.

With your account

ToolKindWhat it does
authenticatechangesSign in with the current 6-digit code. Only used when no setup key is saved.
get_profilereadsYour name, email and language.
get_addressesreadsYour saved delivery and billing addresses.
get_shopping_listsreadsYour shopping lists by name, for people with more than one.
create_shopping_listchangesStart a new, empty list.
rename_shopping_listdeletesGive a list a new name (the old one is replaced).
delete_shopping_listdeletesDelete a list with its items. Only after you confirm, and never your only list.

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요