프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

FamilySearch

제작자: ianderso버전 1.4.0i★ 1i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.ianderso/familysearch-mcp

설치 방법

What it does

Genealogical research on FamilySearch: historical places, indexed records, page images, the tree.

  • Connects 내 컴퓨터에서 실행
  • Account or key Needs FS_ACCESS_TOKEN
  • Category 여행, 지도 및 날씨

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기4/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수16/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

FamilySearch 설치해 줘. https://mcp.popnx.com/i/ianderso-familysearch-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

FamilySearch 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server FamilySearch을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "familysearch": { "command": "uvx", "args": [ "familysearch-mcp" ], "env": { "FS_ACCESS_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) FS_ACCESS_TOKEN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 FamilySearch의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. FamilySearch에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  4. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "familysearch": {
          "command": "uvx",
          "args": [
            "familysearch-mcp"
          ],
          "env": {
            "FS_ACCESS_TOKEN": "your-value"
          }
        }
      }
    }

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude를 끄고 다시 열기

  6. 해 보기

    FamilySearch을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 FamilySearch을 쓰고 있다고 하거나 답에 FamilySearch 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • FS_ENV_FILE 설정을 읽고 세션 중 갱신된 토큰을 다시 읽어올 env 파일. 기본값은 작업 디렉터리에서 위로 올라가며 찾은 가장 가까운 .env입니다.
    영어 원문 보기Env file to read settings from and to re-read a refreshed token from mid-session. Defaults to the nearest .env from the working directory upward.
  • FS_CLIENT_ID 등록된 애플리케이션의 client id이며, auth_status가 보고합니다.
    영어 원문 보기Your registered application's client id, reported by auth_status.
  • FS_ENVIRONMENT production 또는 FamilySearch 샌드박스용 integration.
    영어 원문 보기production, or integration for the FamilySearch sandbox.
    · 기본값 production
  • FS_TIMEOUT HTTP 타임아웃(초)입니다.
    영어 원문 보기HTTP timeout in seconds.
    · 기본값 60

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 FamilySearch에 연결할 수 없어요

FamilySearch는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · FamilySearch에 연결되는 앱 쓰기

  • FamilySearch 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • FamilySearch 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • FamilySearch 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • FamilySearch 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

B · 여행, 지도 및 날씨에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

FamilySearch 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server FamilySearch을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user familysearch --env FS_ACCESS_TOKEN=your-value -- uvx familysearch-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) FS_ACCESS_TOKEN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 FamilySearch의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. FamilySearch에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  4. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user familysearch --env FS_ACCESS_TOKEN=your-value -- uvx familysearch-mcp

    Enter 전에 “your-value”를 내 키로 바꾸세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude Code에서 /mcp 입력

    FamilySearch이 목록에 있고 연결됨으로 보이면 돼요

  6. 해 보기

    FamilySearch을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 FamilySearch을 쓰고 있다고 하거나 답에 FamilySearch 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • FS_ENV_FILE 설정을 읽고 세션 중 갱신된 토큰을 다시 읽어올 env 파일. 기본값은 작업 디렉터리에서 위로 올라가며 찾은 가장 가까운 .env입니다.
    영어 원문 보기Env file to read settings from and to re-read a refreshed token from mid-session. Defaults to the nearest .env from the working directory upward.
  • FS_CLIENT_ID 등록된 애플리케이션의 client id이며, auth_status가 보고합니다.
    영어 원문 보기Your registered application's client id, reported by auth_status.
  • FS_ENVIRONMENT production 또는 FamilySearch 샌드박스용 integration.
    영어 원문 보기production, or integration for the FamilySearch sandbox.
    · 기본값 production
  • FS_TIMEOUT HTTP 타임아웃(초)입니다.
    영어 원문 보기HTTP timeout in seconds.
    · 기본값 60

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

FamilySearch 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server FamilySearch을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "familysearch": { "command": "uvx", "args": [ "familysearch-mcp" ], "env": { "FS_ACCESS_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) FS_ACCESS_TOKEN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 FamilySearch의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. FamilySearch에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    FamilySearch 설정에서 FS_ACCESS_TOKEN가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Cursor에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    FamilySearch을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 FamilySearch을 쓰고 있다고 하거나 답에 FamilySearch 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • FS_ENV_FILE 설정을 읽고 세션 중 갱신된 토큰을 다시 읽어올 env 파일. 기본값은 작업 디렉터리에서 위로 올라가며 찾은 가장 가까운 .env입니다.
    영어 원문 보기Env file to read settings from and to re-read a refreshed token from mid-session. Defaults to the nearest .env from the working directory upward.
  • FS_CLIENT_ID 등록된 애플리케이션의 client id이며, auth_status가 보고합니다.
    영어 원문 보기Your registered application's client id, reported by auth_status.
  • FS_ENVIRONMENT production 또는 FamilySearch 샌드박스용 integration.
    영어 원문 보기production, or integration for the FamilySearch sandbox.
    · 기본값 production
  • FS_TIMEOUT HTTP 타임아웃(초)입니다.
    영어 원문 보기HTTP timeout in seconds.
    · 기본값 60

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

FamilySearch 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server FamilySearch을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "familysearch": { "type": "stdio", "command": "uvx", "args": [ "familysearch-mcp" ], "env": { "FS_ACCESS_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) FS_ACCESS_TOKEN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 FamilySearch의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. FamilySearch에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    FamilySearch 설정에서 FS_ACCESS_TOKEN가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. VS Code에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    FamilySearch을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 FamilySearch을 쓰고 있다고 하거나 답에 FamilySearch 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • FS_ENV_FILE 설정을 읽고 세션 중 갱신된 토큰을 다시 읽어올 env 파일. 기본값은 작업 디렉터리에서 위로 올라가며 찾은 가장 가까운 .env입니다.
    영어 원문 보기Env file to read settings from and to re-read a refreshed token from mid-session. Defaults to the nearest .env from the working directory upward.
  • FS_CLIENT_ID 등록된 애플리케이션의 client id이며, auth_status가 보고합니다.
    영어 원문 보기Your registered application's client id, reported by auth_status.
  • FS_ENVIRONMENT production 또는 FamilySearch 샌드박스용 integration.
    영어 원문 보기production, or integration for the FamilySearch sandbox.
    · 기본값 production
  • FS_TIMEOUT HTTP 타임아웃(초)입니다.
    영어 원문 보기HTTP timeout in seconds.
    · 기본값 60

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? FamilySearch을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user familysearch --env FS_ACCESS_TOKEN=your-value -- uvx familysearch-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "familysearch": {
      "command": "uvx",
      "args": [
        "familysearch-mcp"
      ],
      "env": {
        "FS_ACCESS_TOKEN": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "familysearch": {
      "command": "uvx",
      "args": [
        "familysearch-mcp"
      ],
      "env": {
        "FS_ACCESS_TOKEN": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "familysearch": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "familysearch-mcp"
      ],
      "env": {
        "FS_ACCESS_TOKEN": "your-value"
      }
    }
  }
}

직접 입력할 값

  • FS_ACCESS_TOKEN 비밀 필수 env
    직접 등록한 FamilySearch 애플리케이션의 액세스 토큰. 지명 사전과 컬렉션 목록은 토큰 없이도 작동합니다
    영어 원문 보기Access token from your own registered FamilySearch application. The place gazetteer and collection catalogue work without one.
  • FS_ENV_FILE env
    설정을 읽고 세션 중 갱신된 토큰을 다시 읽어올 env 파일. 기본값은 작업 디렉터리에서 위로 올라가며 찾은 가장 가까운 .env입니다.
    영어 원문 보기Env file to read settings from and to re-read a refreshed token from mid-session. Defaults to the nearest .env from the working directory upward.
  • FS_CLIENT_ID env
    등록된 애플리케이션의 client id이며, auth_status가 보고합니다.
    영어 원문 보기Your registered application's client id, reported by auth_status.
  • FS_ENVIRONMENT env
    production 또는 FamilySearch 샌드박스용 integration.
    영어 원문 보기production, or integration for the FamilySearch sandbox.
  • FS_TIMEOUT env
    HTTP 타임아웃(초)입니다.
    영어 원문 보기HTTP timeout in seconds.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
87/주
연결 방식
내 컴퓨터에서 실행
최신 버전i
1.4.0
레지스트리 공개i
2026년 10월 11일
코드 마지막 변경i
2026년 11월 14일
제작자
ianderso
패키지
pypi: familysearch-mcp
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 ianderso 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 5일 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 familysearch-mcp@1.4.0 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/ianderso-familysearch-mcp.svg)](https://mcp.popnx.com/en/servers/ianderso-familysearch-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

여행, 지도 및 날씨 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 2002개 중 88%보다 스타가 많아요
  • 이 카테고리의 다른 서버 2002개 중 42%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 2002개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

FamilySearch, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: FS_ACCESS_TOKEN

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 5일 전 변경됐고, 최신 버전(1.4.0)은 39일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Mu, Award Travel Finder, Killbottleneck, Whimsical, HasData Google Maps

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Mu

News, web search, mail, markets, weather, places, files, calendar, contacts. 67 tools, one endpoint.

제작자: micro성장 중★ 4404개월 전 업데이트

클라우드에서 실행✓ micro.mu

Killbottleneck

Free-to-self-host goal and process maps for humans and AI agents, with REST API and MCP.

제작자: tengolabs초기↓ 328/주★ 1412일 전 업데이트

내 컴퓨터에서 실행✓ 서비스 회사 · killbottleneck.com

Whimsical

Create and edit flowcharts, mind maps, wireframes, and docs in Whimsical, or search your workspace.

제작자: WhimsicalCode초기★ 112개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · whimsical.com

HasData Google Maps

Google Maps places, reviews, contributor history, photos and posts as JSON. No Google Cloud.

제작자: HasData초기↓ 107/주★ 102개월 전 업데이트

컴퓨터 또는 클라우드✓ 서비스 회사 · hasdata.com
비슷한 항목과 비교
이 항목
FamilySearch
MuAward Travel FinderKillbottleneckWhimsicalHasData Google Maps
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드 또는 컴퓨터 설치 모두 가능
키 필요예아니요아니요예아니요예
Claude에서 +로 추가아니요아니요아니요아니요예아니요
기본 점검3/34/43/33/34/45/5
라이선스MITAGPL-3.0MITMITMITMIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

familysearch-mcp

An MCP server for genealogical research on FamilySearch: a historical place gazetteer, indexed record search, the page images behind the records, and reads of the shared family tree.

Nothing here writes to FamilySearch. The shared tree is community-edited and conflations of same-named people are common, so a tree result is a hint: follow it to the underlying record and cite that.

This is an independent project. It is not made, endorsed or supported by FamilySearch.

Credentials

This package ships no client id and never handles a FamilySearch password. Records, images and the tree need an access token from your own registered FamilySearch application; docs/AUTH.md explains why, and how to get one.

The gazetteer, the collection catalogue and the film browser answer without a token, so they work on a fresh install with no setup at all.

Install

uvx familysearch-mcp

That runs the server over stdio, which is how an MCP client starts it. You normally put it in the client's configuration rather than running it yourself.

Claude Desktop
{

"mcpServers": { "familysearch": { "command": "uvx", "args": ["familysearch-mcp"], "env": { "FS_ENV_FILE": "/path/to/familysearch.env" } } } }

Point at an env file rather than pasting the token into env. A token that lives in the client's config can only be replaced by editing it and restarting; a token in the file is picked up mid-session. With no token at all, leave env out and the anonymous tools still work.

Claude Code
claude mcp add familysearch -e FS_ENV_FILE=/path/to/familysearch.env -- uvx familysearch-mcp

Configuration

VariableMeaning
FS_ACCESS_TOKENBearer token from your application's OAuth flow.
FS_ENV_FILEThe env file to read these settings from, and to re-read a refreshed token from. Default: the nearest .env from the working directory upward.
FS_CLIENT_IDYour registered application's client id, reported by auth_status.
FS_ENVIRONMENTproduction (default) or integration for the FamilySearch sandbox.
FS_TIMEOUTHTTP timeout in seconds. Default 60.

.env.example lists them with comments.

Tools

Twenty-eight tools. All of them read; download_image also writes the page it fetches to a local file.

Places

FamilySearch's Places API answers anonymously.

ToolNeeds a tokenPurpose
search_placesnoResolve a place name to its full jurisdictional form and coordinates.
search_places_at_datenoResolve a place *as it was* in a given year. A record naming a county that no longer exists is normal; filing it under the modern one is an invisible error.
get_placenoRead one place: jurisdictional chain, type, coordinates, and the dates that jurisdiction existed.
get_place_jurisdictionsnoWalk the containment chain upward — what turns "Kaskaskia" into "Kaskaskia, Randolph, Illinois, United States".
get_place_childrennoThe places directly inside a jurisdiction — the downward walk.
Records and collections
ToolNeeds a tokenPurpose
search_recordsyesSearch historical records by name, life events, parents, spouse, record type or collection. Every criterion filters, and the result says which FamilySearch applied exactly, relaxed or ignored. Returns one hit per record, with the others named on it.
get_recordyesRead one indexed record in full: every person on it and the labelled fields behind each.
get_record_imageyesFind the document image a record came from, or the film number when no image was published.
get_records_on_imageyesEvery record indexed from one image. A census page carries forty people.
fulltext_searchyesSearch the handwriting-recognised text of page images, mostly deeds, wills, probate and court files, for a name or phrase anywhere on the page. A machine reading: open the image and cite that.
search_collectionsnoFind a record collection by the words of its title, with its coverage, and how big and how old the cached catalogue is.
get_collectionnoRead one collection: what it covers and how much of it there is.
get_collection_fieldsnoDecode a collection's indexed field codes (PR_FTHR_NAME → "Father's Name").
browse_waypointsnoBrowse a collection's places, volumes and images, to reach pages the index never covered.
get_catalog_entryyesRead a FamilySearch Catalog entry: title, authors, places, notes, and each film or DGS with its description, image count and whether you can view it. contains narrows an entry of thousands to the volume or case you want; film_number finds the entry, and the volume, from a bare DGS or microfilm number.
Page images
ToolNeeds a tokenPurpose
get_image_linksfor the pageResolve an image ark to fetchable URLs: full page, deep zoom, thumbnails, neighbouring pages, and with a token the film and image number a citation needs. Without a token only the navigation comes back.
get_film_imagefor the pageReach a page by film and image number when a citation gives those instead of an ark. Checking the page exists needs no token.
download_imageyesDownload a page image to a new local file so it can be read.
Shared tree — a lead, never a source

Every tool here reads a community-edited profile, and says so in its own description.

ToolNeeds a tokenPurpose
get_personyesRead a shared-tree person: names, sex, facts.
get_person_relativesyesParents, spouses, children and siblings in one call.
get_person_sourcesyesWhat the tree attaches as sources, and which facts each supports. The fastest route out of the tree.
get_ancestryyesPedigree walk back, up to 8 generations, numbered by Ahnentafel.
get_descendancyyesPedigree walk forward, up to 4 generations.
get_person_memoriesyesAttached photographs, documents and stories.
get_person_changesyesThe change log: who edited this profile, when, and why.
get_matchesyesFamilySearch's own duplicate and record-match candidates.
compare_personyesCompare your own record of a deceased person with their profile: what agrees, what the profile lacks, what differs, and one proposed change per packet for you to make by hand.
Setup
ToolNeeds a tokenPurpose
auth_statusnoReport what is configured, what is missing, and whether FamilySearch still accepts the token.

How it behaves

  • The tree is not evidence. The tree tools read profiles anyone can edit. Use them to find records. get_person_sources is the most useful of them because it leads out of the tree towards a document.
  • A comparison proposes; it never changes. compare_person takes your own names, events, relatives and sources for one person, reads the profile, and reports what agrees, what the profile lacks and what differs. Each proposed change comes as a packet: the source, the facts to tag it to, a draft reason with gaps for you to fill, and where on the website to make it. You make the change yourself, one at a time, after reading the record. It refuses anyone who may be living, and it never proposes combining profiles, removing anything, replacing a relationship or changing living status. See docs/COMPARE.md.
  • A persona is not the record. A search returns one person's summary of what a record said; get_record returns the indexed fields behind it, and get_record_image the document itself. Read down that chain before citing.
  • Jurisdictions move. search_places_at_date resolves a place as it was in a given year. Filing an 1820 record under the county that covers the ground today is a common and hard-to-spot error.
  • Record search uses the website's search service. The API's own record search answers from a partial index that is almost all immigration records. search_records asks the service the FamilySearch website uses instead, with your token and a browser User-Agent, which that service requires. It is undocumented and FamilySearch can change or close it; docs/API-NOTES.md has the comparison.
  • Full-text search is a machine reading. fulltext_search asks the website's full-text service, on the same footing as record search: your token, a browser User-Agent, and an undocumented route. Its text is handwriting recognition, so names and numbers are often misread; each hit gives the passages that matched and the page's image ark, and the page is what to read and cite. Only some collections and volumes have been machine-read, so no result proves nothing. Every word must match unless you write OR, because the service otherwise matches any one of them.
  • The Catalog describes holdings, not records. get_catalog_entry reads the entry the website's catalog page reads, on the same footing as record search. For each film it reports the DGS number, which get_film_image and fulltext_search take, and asks the image store whether your account may view it and how many images it holds. A DGS is not the microfilm number; a film may be restricted or never digitised; and a description is a cataloguer's summary, so read the images and cite them.
  • Search criteria filter, loosely unless `exact`. FamilySearch treats a search term as a ranking hint unless told otherwise, so adding a death year to a name search only reorders it. This server asks for every criterion to match; loose=True goes back to ranking. Even required, a criterion leaves out only a record that contradicts it: a record giving no birth year still matches "born 1850", and a year matches five either side. exact=True makes each one present and matching, and holds a place to the county or state named. Every result's filters says how each criterion was applied, so a nil result can be read as the negative it is, or is not.
  • Tokens expire, and a refreshed one is picked up. A token lasts about an hour. On a 401 the server re-reads FS_ACCESS_TOKEN from the env file and retries once, so refreshing the file is enough. auth_status reports token_accepted: false when it is not.
  • Throttling is retried once. A 429 asking for a wait of up to 15 seconds is waited out and retried. A longer wait, or a second 429, comes back as rate_limited with the server's Retry-After.
  • Unknown parameters are refused. A misspelt or invented argument is an error that lists the parameters the tool does take. It is not silently dropped, which would make a filtered search quietly return unfiltered results.
  • `download_image` is careful with what it is given. It fetches only HTTPS URLs on FamilySearch hosts, because the request carries your token. It creates only image and PDF files, and never overwrites one.
  • Some routes are not publicly documented. FamilySearch's Historical Records API is behind a login wall, so those routes and response shapes were confirmed by live probing instead. A comment beside the code says when, and docs/API-NOTES.md records what was found. tests/live_check.py asks again.

Development

git clone https://github.com/ianderso/familysearch-mcp

cd familysear

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요