프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

getdr

제작자: index-pages버전 0.2.0i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.index-pages/getdr-mcp

설치

개요

제작자가 쓴 설명(영어 원문)

Ahrefs Domain Rating (0–100) for domains or URLs, via getdr by Index Pages

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 개발자 도구
  • 입력해야 할 값: GETDR_SERVE_TOKEN

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 직접 입력할 값: GETDR_API, GETDR_SERVE_TOKEN

비밀로 표시된 값은 내 계정의 열쇠예요. 절대 다른 사람과 공유하거나 채팅에 붙여 넣지 마세요.

필요한 것

  • npmNode.js 설치(npx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "getdr": {
      "command": "npx",
      "args": [
        "-y",
        "getdr-mcp"
      ],
      "env": {
        "GETDR_API": "your-value",
        "GETDR_SERVE_TOKEN": "your-value"
      }
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add getdr --env GETDR_API=your-value --env GETDR_SERVE_TOKEN=your-value -- npx -y getdr-mcp

실행하기 전에 빈 값을 채워 주세요.

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "getdr": {
      "command": "npx",
      "args": [
        "-y",
        "getdr-mcp"
      ],
      "env": {
        "GETDR_API": "your-value",
        "GETDR_SERVE_TOKEN": "your-value"
      }
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "getdr": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "getdr-mcp"
      ],
      "env": {
        "GETDR_API": "your-value",
        "GETDR_SERVE_TOKEN": "your-value"
      }
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

직접 입력할 값

  • GETDR_API env
    URL of a getdr server (getdr serve). When unset, the getdr binary on PATH is used.
  • GETDR_SERVE_TOKEN 비밀 env
    Bearer token for the getdr server, if it requires one.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 index-pages 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

개발자 도구 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 4907개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 4907개 중 80%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 4907개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

getdr, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: GETDR_SERVE_TOKEN

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.2.0)은 9일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: GitHub, Desktop Commander, Cloudflare MCP

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

GitHub

제작자: github

Connect AI assistants to GitHub - manage repos, issues, PRs, and workflows through natural language.

컴퓨터 또는 클라우드★ 34,245MIT4일 전 업데이트
설치

Desktop Commander

제작자: wonderwhy-er

MCP server for terminal commands, file operations, and process management

내 컴퓨터에서 실행★ 10,225MIT16일 전 업데이트
설치

Cloudflare MCP

제작자: cloudflare

Cloudflare MCP servers

클라우드에서 실행★ 4,446Apache-2.014개월 전 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

getdr-mcp

getdr-mcp is a small open-source MCP server by Index Pages that gives AI agents one tool, get_dr: Ahrefs Domain Rating (DR) for domains or URLs. It is a thin front for getdr – it asks a getdr server or the getdr binary and makes no Ahrefs requests of its own. Stdio transport, no runtime dependencies. Docs: index-pages.com/getdr.

Setup

Add it to your MCP client (Claude Desktop, Claude Code, Cursor and others use this shape):

{

"mcpServers": { "getdr": { "command": "npx", "args": ["-y", "getdr-mcp"] } } }

That uses the getdr binary on your PATH. To use a getdr server on your network instead:

{

"mcpServers": { "getdr": { "command": "npx", "args": ["-y", "getdr-mcp"], "env": { "GETDR_API": "http://lan-host:8080", "GETDR_SERVE_TOKEN": "s3cret" } } } }

Requires Node.js 18 or later.

Backends

Checked on every call, in this order:

  1. GETDR_API is set – one POST $GETDR_API/dr to that getdr server (getdr serve), with Authorization: Bearer $GETDR_SERVE_TOKEN when the token is set. The server holds the Ahrefs key and the shared cache, so this machine needs neither.
  2. getdr (0.2.0 or newer) is on PATH – runs getdr --format json -q [--version V] [--fresh] -f - with the targets on stdin, no shell (as arguments after -- when a target starts with #, which -f would skip as a comment). The binary uses its own config, cache and key (AHREFS_KEY), or its own api setting.
  3. Neither – the tool returns an error with setup instructions.

Install the binary with go install github.com/index-pages/getdr@latest or from Releases, then get a free Ahrefs API key: index-pages.com/getdr#key.

Both backends return the same records. Calls time out after 120 seconds.

Proxies: the HTTP backend uses Node's built-in fetch, which ignores HTTP_PROXY/HTTPS_PROXY unless NODE_USE_ENV_PROXY=1 is set (Node 22.21 or later, or 24 and later; older versions have no built-in proxy support). The binary backend honours HTTP_PROXY, HTTPS_PROXY and NO_PROXY as usual.

Tool

get_dr – "Ahrefs Domain Rating (0–100) for domains or URLs, via getdr by Index Pages".

argumenttype
targetsstring[]required, non-empty; domains or URLs
version"dr3" or "dr4"DR formula; when left out, the backend's config decides: the getdr server's with GETDR_API, otherwise the binary's (also when that binary uses a server), dr3 unless set; values are not comparable between versions
freshbooleanignore the cache and fetch again

Targets are normalized by getdr: a URL becomes its host, www. is dropped, everything is lower-cased and duplicates are removed. Results follow the input order.

Output

The text result is a JSON array with one record per target, and nothing else:

[

{"target":"ahrefs.com","dr":91,"version":"dr3","checked_at":"2026-10-28T12:00:00Z","cached":true}, {"target":"nodata.example","dr":null,"version":"dr3","checked_at":"2026-10-28T12:00:00Z","cached":false} ]

The record is the getdr JSON contract, the same as getdr --format json and getdr serve. dr is null when Ahrefs has no data; checked_at is null too when there was no response or the target is invalid. An invalid target (not a domain or URL, or refused by Ahrefs, such as localhost) also has "error":"invalid target"; no other record has an error key. Clients on MCP protocol 2025-06-18 or later also get structuredContent – {"results": […]} – and an outputSchema for it.

Invalid targets and targets without a response are part of a normal result. Failures come back as a tool error (isError: true) with getdr's message:

  • no target got a response at all;
  • getdr server answered 401 – the token is missing or wrong, set GETDR_SERVE_TOKEN;
  • getdr server answered 503, or the binary exited with code 3 – the Ahrefs key is missing or rejected;
  • the server is unreachable, the binary failed, or a call timed out.

Supported MCP protocol versions: 2026-07-28 (stateless: server/discover and per-request _meta, no handshake) and the initialize-based 2025-11-25, 2025-06-18, 2025-03-26 and 2024-11-05, served side by side.

Attribution

Domain Rating data comes from Ahrefs and is subject to the Domain Rating License, which requires the attribution "Domain Rating by Ahrefs" wherever you publish the numbers. The tool result carries only the data, with no attribution in it.

getdr is not affiliated with Ahrefs.

No telemetry

getdr-mcp connects to exactly one place: the getdr server in GETDR_API, when you set it. Otherwise it only starts the getdr binary. No telemetry, no update checks, no analytics, no pings. Requests carry the User-Agent getdr-mcp/ (+https://index-pages.com/getdr). You can verify this in the source: the only outgoing request and the only child process are in src/backends.ts.

Development

npm ci

npm run build npm test

The backend tests build getdr and its mock-backed server from the getdr source tree (../bin, or GETDR_SRC) and need Go; without it they are skipped. The live check runs only when AHREFS_KEY is set.

Releasing

Bump the version in package.json, server.json (twice) and src/version.ts, update CHANGELOG.md, then push a tag vX.Y.Z. .github/workflows/release.yml builds, runs the tests against the getdr source at the same tag, checks that every version matches the tag and that the packed tarball holds dist/index.js with its shebang, and publishes with npm trusted publishing (OIDC, no token, provenance included).

Trusted publishing can only be configured for a package that already exists on npm, so the first release is published by hand once: npm login, then npm run release. Right after that, add the trusted publisher on npmjs.com (package Settings → Trusted publishing: GitHub Actions, index-pages / getdr-mcp, workflow release.yml); the workflow has to complete its first publish within 2 days or the configuration expires.

For any manual publish use npm run release (build, tests, check-release, npm publish), never a bare npm publish: with install scripts disabled (ignore-scripts) prepack does not run and the package would ship without dist/. prepack stays as a fallback for setups that run scripts.

The same workflow then publishes server.json to the MCP Registry as io.github.index-pages/getdr-mcp: it waits until npm shows the new version (the registry checks mcpName in the npm package), proves the index-pages namespace with the workflow's OIDC token (mcp-publisher login github-oidc, no secret) and runs mcp-publisher publish with a pinned, checksummed mcp-publisher. A version already in the registry is skipped.

License

MIT, see LICENSE. Made by Index Pages.

PopNx에게 묻기