emailmd
Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.
Manage SockDock rules: Slack posts that run Claude Code, Codex or a program on your Mac.
제작자가 쓴 원문
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
검사 3/3 통과 · 내 컴퓨터에서 실행돼요
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
SockDock for Slack을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 SockDock for Slack을 쓰고 있다고 하거나 답에 SockDock for Slack 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 SockDock for Slack에 연결할 수 없어요
SockDock for Slack는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · SockDock for Slack에 연결되는 앱 쓰기
B · 채팅 및 이메일에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code는 아직 SockDock for Slack에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
A · SockDock for Slack에 연결되는 앱 쓰기
Cursor는 아직 SockDock for Slack에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
A · SockDock for Slack에 연결되는 앱 쓰기
VS Code는 아직 SockDock for Slack에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
A · SockDock for Slack에 연결되는 앱 쓰기
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검
레지스트리 이름이 GitHub 계정 iwamatsu0430 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 어제
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/iwamatsu0430-sockdock)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(0.2.1)은 3일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 MCPB도 있어야 해요.
같은 카테고리에는: emailmd, Kite Discord Bot Builder, e2a — email for AI agents, Infobip MCP, kernelCAD
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.
Build and fix Discord bots from a chat. Kite hosts them 24/7, with no code to deploy.
Authenticated email gateway for AI agents — per-agent inboxes, HITL approval, SPF/DKIM verified.
Infobip MCP server for omnichannel communication and messaging. SMS, RCS, WhatsApp, Viber and more.
CAD in ChatGPT and Claude: editable parts, STEP/STL/drawings, in-chat 3D, automatic checks.
| 이 항목 SockDock for Slack | emailmd | Kite Discord Bot Builder | e2a — email for AI agents | Infobip MCP | kernelCAD | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드 또는 컴퓨터 설치 모두 가능 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 예 | 아니요 |
| 기본 점검 | 3/3 | 5/5 | 4/4 | 4/4 | 4/4 | 4/4 |
| 라이선스 | MIT | MIT | AGPL-3.0 | Apache-2.0 | MIT | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Run Slack apps locally: one Socket Mode connection, many handlers.
SockDock (sockdock) is a small gateway that runs on your Mac. It receives messages from your Slack workspace over Socket Mode — nothing needs to be reachable from the internet — and hands them to handlers you configure:
Think of it as a power strip: Slack apps allow one socket, and SockDock lets you plug many things into it. A top-level message that matches a route (a channel, or DMs to the app, plus a condition) starts a thread; every reply in that thread goes to the same handler.
It comes with a CLI and an optional menu bar app.
SockDock is not affiliated with, created by, or supported by Slack Technologies, LLC.
Status: early development. macOS 13+ is the main target (the CLI also works on Linux).
With Homebrew:
brew install --cask iwamatsu0430/tap/sockdock # menu bar app
brew install --formula iwamatsu0430/tap/sockdock # CLI (macOS, Linux)
The app is not notarized by Apple, so the first time you open it, macOS stops it with “SockDock” Not Opened:
This allows SockDock only; the rest of your Mac's protection stays on. Homebrew checks the download against the checksum recorded in the tap before installing it. See also Safely open apps on your Mac.
Or build from source. Tools are managed with mise.
git clone https://github.com/iwamatsu0430/sock-dock-slack.git
cd sock-dock-slack mise install # Go, Node, wails3 mise run build # -> bin/sockdock mise run app # optional: -> dist/SockDock.app (menu bar app, CLI bundled)
If you built it, put bin/sockdock somewhere on your PATH (the examples below assume sockdock is on it).
sockdock manifest
connections:write scope (xapp-…).xoxb-…)./invite @SockDock. DMs to the app need no invite.Optional: to show SockDock's icon on its replies, upload assets/slack-icon.png as the app icon (Basic Information → Display Information). Slack manifests can't set it.
sockdock auth set # prompts for both tokens and stores them in the macOS Keychain
sockdock auth status
Alternatively, export SLACK_APP_TOKEN and SLACK_BOT_TOKEN, or point settings.secrets_file at a chmod 600 .env file.
sockdock init # writes a starter config with an "echo" route
mkdir -p ~/sockdock-handlers cp examples/echo.sh ~/sockdock-handlers/ # the handler that route runs
Edit the config and replace C0123456789 with your channel's ID.
The config lives at ~/Library/Application Support/sockdock/config.yaml (Linux: $XDG_CONFIG_HOME/sockdock/config.yaml). A minimal route:
routes:
A route reacts to top-level posts that meet one of these conditions. Within a channel, routes are tried from the top and the first match runs (routes that are off are skipped).
| Key | Posts it runs on | groups |
|---|---|---|
starts_with: echo | Posts starting with the keyword | text: what follows the keyword |
contains: review | Posts containing the keyword | text: the whole post |
match: '^deploy (?P \w+)$' | Posts matching the regular expression (RE2) | the named groups |
all_posts: true | Every post | text: the whole post |
Keywords ignore case, full-width vs half-width characters, repeated spaces and a leading mention of the Slack app. A keyword of letters and digits does not match inside a word (entry does not match entryx). Regular expressions are case sensitive. Add mention_only: true to run a route only for posts that mention the Slack app, and use channel: dm for DMs (see "DMs and mentions" below).
Check it:
sockdock check
sockdock match C0123456789 "echo hello"
sockdock run # in the foreground (Ctrl-C to stop)
sockdock service install # or, without the menu bar app: start at login, restart on failure (launchd / systemd) sockdock status
Post echo hello in the channel: SockDock reacts with 👀, runs the handler and replies in the thread.
With the app you do not need steps 3–5 above or any YAML. Open SockDock from Applications (built from source: open dist/SockDock.app or mise run gui):
connections:write, then paste both tokens and press Connect to Slack. The tokens are checked with Slack first and saved to the Keychain only if both work. To use a Slack app you already have, open Use a Slack app you already have in setup: it lists the settings (Socket Mode, the message.channels/message.groups events, Bot Token scopes, for DMs the optional message.im event, im:history scope and Messages tab, and for attached files the optional files:read scope) and copies the part to add to its App Manifest. With Socket Mode on, that app's events go only to SockDock. If required scopes are missing, Connect to Slack names them.channels:read/groups:read scopes, enter a channel ID or link) or DM, choose who can run it (everyone in the channel, or people you choose by name), choose which posts it reacts to (starting with, containing, a regular expression, or all; tick *Only when mentioned* to need a mention of the Slack app), and choose what runs — an AI agent (Claude Code or Codex) in a working folder, with instructions and what it may do, or a program. The list is grouped by channel and shows each rule's last run. Within a channel the rule higher up comes first; drag ⠿ to reorder. Open a rule for recent runs, thread links and Stop. … in the channel.The app runs the gateway while it is open — there is no separate service to install. Clicking the menu bar icon shows the connection, running and recent runs; There is one window: switch between Rules and Settings at the top. Settings (⌘,) has the Slack connection and who you are in Slack (see "Notifications by DM"), *Open at login*, notifications (Mac and Slack DM), the language (also used for the messages posted to Slack), MCP and Reset SockDock…, which removes the tokens, rules, run history and app settings and starts over from setup (the config file goes to the Trash; logs are kept). Open Config File opens the YAML in your editor for anything the form does not cover. A rule with a problem (e.g. a missing folder, or a rule above that always matches first) is shown in red and left out; the other rules keep running.
If a sockdock service install service is already running, the app shows its state and does not start its own gateway.
Anyone who can post in a channel can trigger its rules. To limit a rule to some people, list their Slack member IDs:
routes:
users:read scope, which the bundled manifest includes. Without it, enter member IDs (in Slack, a profile's ⋮ menu → Copy member ID). users:read lets the app read the profiles of the workspace's members; SockDock uses it only for this list.Every handler receives this JSON (on stdin for command handlers):
{
"route": "echo", "turn": 1, "channel": "C0123456789", "thread_ts": "1762920000.000100", "permalink": "https://example.slack.com/archives/C0123456789/p1762920000000100", "groups": { "text": "hello" }, "messages": [{ "ts": "1762920000.000100", "user": "U0123", "text": "echo hello" }] }
groups holds the values taken from the first message (see the table above) and is passed on every turn of the thread.
Files attached to a post or a thread reply (screenshots, logs, PDFs, …) are handed over with it, so you can ask "look at this screenshot". A message with files gets a files list:
"messages": [{ "ts": "1762920000.000100", "user": "U0123", "text": "check this log",
"files": [ { "name": "app.log", "mimetype": "text/plain", "size": 18233, "path": "/Users/me/Library/Caches/sockdock/files/812/app.log" }, { "name": "build.zip", "mimetype": "application/zip", "size": 73400320, "skipped": "too_large" } ] }]
~/Library/Caches/sockdock/files/, outside the rule's folder) and deleted when it ends. Copy them if you need them later.skipped instead of path: too_large (over settings.max_file_mb, 20 MB by default), external (stored outside Slack, e.g. Google Drive), unsupported (Slack posts and canvases), no_scope (the Slack app lacks files:read) or failed. The run goes ahead with the text and the other files; SockDock posts nothing about it, so the handler decides whether to mention it.files:read Bot Token scope, which the bundled manifest includes. Without it, the rule's recent runs say the files were not passed on. files:read can read files in the channels and DMs the Slack app is in; SockDock reads only the files of posts that run a rule.handler:
type: command cwd: