프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요 로그인

sevDesk

제작자: jaylann버전 1.6.0i★ 1i내 컴퓨터에서 실행공식 사이트 ↗
레지스트리 이름io.github.jaylann/mcp-server-sevdesk

설치 방법

할 수 있는 일

Safety-first MCP server for sevDesk accounting: invoices, receipts, banking, reports. Unofficial.

제작자가 쓴 원문

  • 연결 방식 내 컴퓨터에서 실행
  • 계정 또는 키 SEVDESK_API_TOKEN 필요
  • 분류 회계, 재무 및 세금

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기4/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수16/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

sevDesk 설치해 줘. https://mcp.popnx.com/i/jaylann-mcp-server-sevdesk.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 16일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

sevDesk 키가 필요해요 (제작자 사이트에서 만들기) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

  1. 제작자 설치 파일 내려받기

    제작자의 .mcpb 파일 다운로드

    .mcpb 파일은 제작자에게서 바로 온 것으로, 우리는 바꾸지 않았어요

  2. 파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기

  3. 해 보기

    sevDesk을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 sevDesk을 쓰고 있다고 하거나 답에 sevDesk 도구 이름이 나오면 연결된 거예요

추가 설정 8개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • SEVDESK_ALLOW 활성화할 권한 등급을 쉼표로 구분하여 지정: read, write, commit, external 또는 all. 허용된 등급을 초과하는 도구는 등록되지 않습니다. read는 항상 켜져 있습니다
    영어 원문 보기Comma-separated permission tiers to enable: read, write, commit, external, or all. Tools above the allowed tiers are not registered. read is always on.
    · 기본값 read
  • SEVDESK_READ_ONLY true로 설정하면 SEVDESK_ALLOW 값과 관계없이 읽기 전용 도구만 허용합니다.
    영어 원문 보기Set to true to allow only read tools, whatever SEVDESK_ALLOW says.
    · 기본값 false
  • SEVDESK_DRY_RUN true로 설정하면 쓰기 도구는 전송 없이 수행될 작업의 미리보기만 반환합니다.
    영어 원문 보기Set to true to make write tools only return a preview of what they would do, without sending anything.
    · 기본값 false
  • SEVDESK_CONFIRM 사람이 커밋 및 외부 작업을 확인하는 방식: elicit(클라이언트 내), browser(로컬 승인 페이지) 또는 off(SEVDESK_I_UNDERSTAND_NO_CONFIRM=1도 필요).
    영어 원문 보기How a human confirms commit and external actions: elicit (in the client), browser (local approval page) or off (also needs SEVDESK_I_UNDERSTAND_NO_CONFIRM=1).
    · 기본값 elicit
  • SEVDESK_AUDIT_LOG 서버가 수행하는 모든 쓰기 작업을 기록하는 로컬 JSON Lines 파일의 경로(민감 정보 제거됨). 설정하지 않으면: 감사 로그 없음.
    영어 원문 보기Path of a local JSON Lines file that records every write the server makes (redacted). Unset: no audit log.
  • SEVDESK_TOOLSETS 로드할 툴셋을 쉼표로 구분하여 지정합니다. 예: invoices,vouchers,banking. 설정하지 않으면 advanced를 제외한 모든 툴셋을 로드합니다. all로 설정하면 advanced도 추가됩니다.
    영어 원문 보기Comma-separated toolsets to load, e.g. invoices,vouchers,banking. Unset loads all except advanced; all adds advanced.
  • SEVDESK_FILE_DIRS Absolute folders (separated like PATH) that receipts and e-invoices may be read from, for voucher uploads and e-invoice import. Unset: no local file is read.
  • SEVDESK_OUTPUT_DIR PDF, 전자세금계산서 XML, CSV, DATEV 내보내기 파일을 저장할 수 있는 폴더입니다. 설정하지 않으면 파일 저장 도구가 제공되지 않습니다.
    영어 원문 보기Folder where PDFs, e-invoice XML, CSV and DATEV exports may be saved. Unset: the file-saving tools are not offered.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 sevDesk에 연결할 수 없어요

sevDesk는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · sevDesk에 연결되는 앱 쓰기

  • sevDesk 키가 필요해요 (제작자 사이트에서 만들기) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • sevDesk 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • sevDesk 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • sevDesk 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

B · 회계, 재무 및 세금에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

sevDesk 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server sevDesk을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user sevdesk --env SEVDESK_API_TOKEN=your-value -- npx -y mcp-server-sevdesk 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) SEVDESK_API_TOKEN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 sevDesk의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. sevDesk에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    sevDesk 사이트 열기 ↗

  3. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  4. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user sevdesk --env SEVDESK_API_TOKEN=your-value -- npx -y mcp-server-sevdesk

    Enter 전에 “your-value”를 내 키로 바꾸세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude Code에서 /mcp 입력

    sevDesk이 목록에 있고 연결됨으로 보이면 돼요

  6. 해 보기

    sevDesk을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 sevDesk을 쓰고 있다고 하거나 답에 sevDesk 도구 이름이 나오면 연결된 거예요

추가 설정 8개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • SEVDESK_ALLOW 활성화할 권한 등급을 쉼표로 구분하여 지정: read, write, commit, external 또는 all. 허용된 등급을 초과하는 도구는 등록되지 않습니다. read는 항상 켜져 있습니다
    영어 원문 보기Comma-separated permission tiers to enable: read, write, commit, external, or all. Tools above the allowed tiers are not registered. read is always on.
    · 기본값 read
  • SEVDESK_READ_ONLY true로 설정하면 SEVDESK_ALLOW 값과 관계없이 읽기 전용 도구만 허용합니다.
    영어 원문 보기Set to true to allow only read tools, whatever SEVDESK_ALLOW says.
    · 기본값 false
  • SEVDESK_DRY_RUN true로 설정하면 쓰기 도구는 전송 없이 수행될 작업의 미리보기만 반환합니다.
    영어 원문 보기Set to true to make write tools only return a preview of what they would do, without sending anything.
    · 기본값 false
  • SEVDESK_CONFIRM 사람이 커밋 및 외부 작업을 확인하는 방식: elicit(클라이언트 내), browser(로컬 승인 페이지) 또는 off(SEVDESK_I_UNDERSTAND_NO_CONFIRM=1도 필요).
    영어 원문 보기How a human confirms commit and external actions: elicit (in the client), browser (local approval page) or off (also needs SEVDESK_I_UNDERSTAND_NO_CONFIRM=1).
    · 기본값 elicit
  • SEVDESK_AUDIT_LOG 서버가 수행하는 모든 쓰기 작업을 기록하는 로컬 JSON Lines 파일의 경로(민감 정보 제거됨). 설정하지 않으면: 감사 로그 없음.
    영어 원문 보기Path of a local JSON Lines file that records every write the server makes (redacted). Unset: no audit log.
  • SEVDESK_TOOLSETS 로드할 툴셋을 쉼표로 구분하여 지정합니다. 예: invoices,vouchers,banking. 설정하지 않으면 advanced를 제외한 모든 툴셋을 로드합니다. all로 설정하면 advanced도 추가됩니다.
    영어 원문 보기Comma-separated toolsets to load, e.g. invoices,vouchers,banking. Unset loads all except advanced; all adds advanced.
  • SEVDESK_FILE_DIRS Absolute folders (separated like PATH) that receipts and e-invoices may be read from, for voucher uploads and e-invoice import. Unset: no local file is read.
  • SEVDESK_OUTPUT_DIR PDF, 전자세금계산서 XML, CSV, DATEV 내보내기 파일을 저장할 수 있는 폴더입니다. 설정하지 않으면 파일 저장 도구가 제공되지 않습니다.
    영어 원문 보기Folder where PDFs, e-invoice XML, CSV and DATEV exports may be saved. Unset: the file-saving tools are not offered.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

sevDesk 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server sevDesk을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "sevdesk": { "command": "npx", "args": [ "-y", "mcp-server-sevdesk" ], "env": { "SEVDESK_API_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) SEVDESK_API_TOKEN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 sevDesk의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. sevDesk에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    sevDesk 사이트 열기 ↗

  3. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    sevDesk 설정에서 SEVDESK_API_TOKEN가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Cursor에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    sevDesk을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 sevDesk을 쓰고 있다고 하거나 답에 sevDesk 도구 이름이 나오면 연결된 거예요

추가 설정 8개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • SEVDESK_ALLOW 활성화할 권한 등급을 쉼표로 구분하여 지정: read, write, commit, external 또는 all. 허용된 등급을 초과하는 도구는 등록되지 않습니다. read는 항상 켜져 있습니다
    영어 원문 보기Comma-separated permission tiers to enable: read, write, commit, external, or all. Tools above the allowed tiers are not registered. read is always on.
    · 기본값 read
  • SEVDESK_READ_ONLY true로 설정하면 SEVDESK_ALLOW 값과 관계없이 읽기 전용 도구만 허용합니다.
    영어 원문 보기Set to true to allow only read tools, whatever SEVDESK_ALLOW says.
    · 기본값 false
  • SEVDESK_DRY_RUN true로 설정하면 쓰기 도구는 전송 없이 수행될 작업의 미리보기만 반환합니다.
    영어 원문 보기Set to true to make write tools only return a preview of what they would do, without sending anything.
    · 기본값 false
  • SEVDESK_CONFIRM 사람이 커밋 및 외부 작업을 확인하는 방식: elicit(클라이언트 내), browser(로컬 승인 페이지) 또는 off(SEVDESK_I_UNDERSTAND_NO_CONFIRM=1도 필요).
    영어 원문 보기How a human confirms commit and external actions: elicit (in the client), browser (local approval page) or off (also needs SEVDESK_I_UNDERSTAND_NO_CONFIRM=1).
    · 기본값 elicit
  • SEVDESK_AUDIT_LOG 서버가 수행하는 모든 쓰기 작업을 기록하는 로컬 JSON Lines 파일의 경로(민감 정보 제거됨). 설정하지 않으면: 감사 로그 없음.
    영어 원문 보기Path of a local JSON Lines file that records every write the server makes (redacted). Unset: no audit log.
  • SEVDESK_TOOLSETS 로드할 툴셋을 쉼표로 구분하여 지정합니다. 예: invoices,vouchers,banking. 설정하지 않으면 advanced를 제외한 모든 툴셋을 로드합니다. all로 설정하면 advanced도 추가됩니다.
    영어 원문 보기Comma-separated toolsets to load, e.g. invoices,vouchers,banking. Unset loads all except advanced; all adds advanced.
  • SEVDESK_FILE_DIRS Absolute folders (separated like PATH) that receipts and e-invoices may be read from, for voucher uploads and e-invoice import. Unset: no local file is read.
  • SEVDESK_OUTPUT_DIR PDF, 전자세금계산서 XML, CSV, DATEV 내보내기 파일을 저장할 수 있는 폴더입니다. 설정하지 않으면 파일 저장 도구가 제공되지 않습니다.
    영어 원문 보기Folder where PDFs, e-invoice XML, CSV and DATEV exports may be saved. Unset: the file-saving tools are not offered.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

sevDesk 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server sevDesk을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "sevdesk": { "type": "stdio", "command": "npx", "args": [ "-y", "mcp-server-sevdesk" ], "env": { "SEVDESK_API_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) SEVDESK_API_TOKEN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 sevDesk의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. sevDesk에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    sevDesk 사이트 열기 ↗

  3. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    sevDesk 설정에서 SEVDESK_API_TOKEN가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. VS Code에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    sevDesk을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 sevDesk을 쓰고 있다고 하거나 답에 sevDesk 도구 이름이 나오면 연결된 거예요

추가 설정 8개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • SEVDESK_ALLOW 활성화할 권한 등급을 쉼표로 구분하여 지정: read, write, commit, external 또는 all. 허용된 등급을 초과하는 도구는 등록되지 않습니다. read는 항상 켜져 있습니다
    영어 원문 보기Comma-separated permission tiers to enable: read, write, commit, external, or all. Tools above the allowed tiers are not registered. read is always on.
    · 기본값 read
  • SEVDESK_READ_ONLY true로 설정하면 SEVDESK_ALLOW 값과 관계없이 읽기 전용 도구만 허용합니다.
    영어 원문 보기Set to true to allow only read tools, whatever SEVDESK_ALLOW says.
    · 기본값 false
  • SEVDESK_DRY_RUN true로 설정하면 쓰기 도구는 전송 없이 수행될 작업의 미리보기만 반환합니다.
    영어 원문 보기Set to true to make write tools only return a preview of what they would do, without sending anything.
    · 기본값 false
  • SEVDESK_CONFIRM 사람이 커밋 및 외부 작업을 확인하는 방식: elicit(클라이언트 내), browser(로컬 승인 페이지) 또는 off(SEVDESK_I_UNDERSTAND_NO_CONFIRM=1도 필요).
    영어 원문 보기How a human confirms commit and external actions: elicit (in the client), browser (local approval page) or off (also needs SEVDESK_I_UNDERSTAND_NO_CONFIRM=1).
    · 기본값 elicit
  • SEVDESK_AUDIT_LOG 서버가 수행하는 모든 쓰기 작업을 기록하는 로컬 JSON Lines 파일의 경로(민감 정보 제거됨). 설정하지 않으면: 감사 로그 없음.
    영어 원문 보기Path of a local JSON Lines file that records every write the server makes (redacted). Unset: no audit log.
  • SEVDESK_TOOLSETS 로드할 툴셋을 쉼표로 구분하여 지정합니다. 예: invoices,vouchers,banking. 설정하지 않으면 advanced를 제외한 모든 툴셋을 로드합니다. all로 설정하면 advanced도 추가됩니다.
    영어 원문 보기Comma-separated toolsets to load, e.g. invoices,vouchers,banking. Unset loads all except advanced; all adds advanced.
  • SEVDESK_FILE_DIRS Absolute folders (separated like PATH) that receipts and e-invoices may be read from, for voucher uploads and e-invoice import. Unset: no local file is read.
  • SEVDESK_OUTPUT_DIR PDF, 전자세금계산서 XML, CSV, DATEV 내보내기 파일을 저장할 수 있는 폴더입니다. 설정하지 않으면 파일 저장 도구가 제공되지 않습니다.
    영어 원문 보기Folder where PDFs, e-invoice XML, CSV and DATEV exports may be saved. Unset: the file-saving tools are not offered.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? sevDesk을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user sevdesk --env SEVDESK_API_TOKEN=your-value -- npx -y mcp-server-sevdesk

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "sevdesk": {
      "command": "npx",
      "args": [
        "-y",
        "mcp-server-sevdesk"
      ],
      "env": {
        "SEVDESK_API_TOKEN": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "sevdesk": {
      "command": "npx",
      "args": [
        "-y",
        "mcp-server-sevdesk"
      ],
      "env": {
        "SEVDESK_API_TOKEN": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "sevdesk": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "mcp-server-sevdesk"
      ],
      "env": {
        "SEVDESK_API_TOKEN": "your-value"
      }
    }
  }
}

직접 입력할 값

  • SEVDESK_API_TOKEN 비밀 필수 env
    sevDesk API token (Settings > Users > API token). It has full access to the account; ideally create it for a dedicated user. To keep it out of the client configuration, set up the server by hand with…
  • SEVDESK_ALLOW env
    활성화할 권한 등급을 쉼표로 구분하여 지정: read, write, commit, external 또는 all. 허용된 등급을 초과하는 도구는 등록되지 않습니다. read는 항상 켜져 있습니다
    영어 원문 보기Comma-separated permission tiers to enable: read, write, commit, external, or all. Tools above the allowed tiers are not registered. read is always on.
  • SEVDESK_READ_ONLY env
    true로 설정하면 SEVDESK_ALLOW 값과 관계없이 읽기 전용 도구만 허용합니다.
    영어 원문 보기Set to true to allow only read tools, whatever SEVDESK_ALLOW says.
  • SEVDESK_DRY_RUN env
    true로 설정하면 쓰기 도구는 전송 없이 수행될 작업의 미리보기만 반환합니다.
    영어 원문 보기Set to true to make write tools only return a preview of what they would do, without sending anything.
  • SEVDESK_CONFIRM env
    사람이 커밋 및 외부 작업을 확인하는 방식: elicit(클라이언트 내), browser(로컬 승인 페이지) 또는 off(SEVDESK_I_UNDERSTAND_NO_CONFIRM=1도 필요).
    영어 원문 보기How a human confirms commit and external actions: elicit (in the client), browser (local approval page) or off (also needs SEVDESK_I_UNDERSTAND_NO_CONFIRM=1).
  • SEVDESK_AUDIT_LOG env
    서버가 수행하는 모든 쓰기 작업을 기록하는 로컬 JSON Lines 파일의 경로(민감 정보 제거됨). 설정하지 않으면: 감사 로그 없음.
    영어 원문 보기Path of a local JSON Lines file that records every write the server makes (redacted). Unset: no audit log.
  • SEVDESK_TOOLSETS env
    로드할 툴셋을 쉼표로 구분하여 지정합니다. 예: invoices,vouchers,banking. 설정하지 않으면 advanced를 제외한 모든 툴셋을 로드합니다. all로 설정하면 advanced도 추가됩니다.
    영어 원문 보기Comma-separated toolsets to load, e.g. invoices,vouchers,banking. Unset loads all except advanced; all adds advanced.
  • SEVDESK_FILE_DIRS env
    Absolute folders (separated like PATH) that receipts and e-invoices may be read from, for voucher uploads and e-invoice import. Unset: no local file is read.
  • SEVDESK_OUTPUT_DIR env
    PDF, 전자세금계산서 XML, CSV, DATEV 내보내기 파일을 저장할 수 있는 폴더입니다. 설정하지 않으면 파일 저장 도구가 제공되지 않습니다.
    영어 원문 보기Folder where PDFs, e-invoice XML, CSV and DATEV exports may be saved. Unset: the file-saving tools are not offered.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
npm/PyPI에 없음
연결 방식
내 컴퓨터에서 실행
최신 버전i
1.6.0
레지스트리 공개i
2026년 11월 16일
코드 마지막 변경i
2026년 11월 19일
제작자
jaylann
패키지
npm: mcp-server-sevdesk
oci: ghcr.io/jaylann/mcp-server-sevdesk:1.6.0
mcpb: …/mcp-server-sevdesk-1.6.0.mcpb
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 jaylann 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 어제

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

아직 확인하지 않았습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/jaylann-mcp-server-sevdesk.svg)](https://mcp.popnx.com/en/servers/jaylann-mcp-server-sevdesk)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

회계, 재무 및 세금 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 3496개 중 87%보다 스타가 많아요
  • 이 카테고리의 다른 서버 3496개 중 85%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 3496개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

sevDesk, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: SEVDESK_API_TOKEN

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(1.6.0)은 4일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js, Docker, MCPB도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: SolidInvoice, Signal8, Journalit, Beancount.io, Tapetide - Indian Stock Market MCP

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

SolidInvoice

Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.

제작자: SolidInvoice성장 중★ 99011일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · solidinvoice.co

Signal8

SEC filings, dilution, insider & institutional ownership, and political-trade data for AI agents.

제작자: signal8ai성장 중↓ 431/주★ 42511일 전 업데이트

컴퓨터 또는 클라우드✓ 서비스 회사 · signal8.ai

Journalit

Trading journal in Obsidian. Ask Claude or ChatGPT about your trades; edits are previewed first.

제작자: Cursivez성장 중★ 26112일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · journalit.co

Beancount.io

Query, edit, and reconcile a hosted Beancount ledger: BQL, reports, files, and bank imports.

제작자: bex-co성장 중★ 707 저장소 전체의 별지난달 업데이트

클라우드에서 실행✓ 서비스 회사 · beancount.io
비슷한 항목과 비교
이 항목
sevDesk
SolidInvoiceSignal8JournalitBeancount.ioTapetide - Indian Stock Market MCP
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드 또는 컴퓨터 설치 모두 가능클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드 또는 컴퓨터 설치 모두 가능
키 필요예아니요예아니요아니요예
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/65/54/44/45/5
라이선스MITMITMITNOASSERTIONMITMIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

mcp-server-sevdesk

A safety-first [Model Context Protocol](https://modelcontextprotocol.io) server for the [sevDesk](https://sevdesk.de) accounting API. It lets AI assistants (Claude, Cursor, VS Code, Codex, …) read and work with your invoices, receipts, bank transactions and reports, with permissions you control and a human confirmation step for anything that is legally binding.

[Documentation](https://sevdeskmcp.lanfermann.dev) · Quick start · Tool reference · Releases · 🇩🇪 Deutsch

[!NOTE]

This is an unofficial community project. It is not affiliated with, endorsed by or

supported by sevdesk GmbH. "sevDesk" is a trademark of its owner.

Highlights

A sevDesk API token has full access to the whole account, and sevDesk has no sandbox. This server is built around that fact:

  • Read-only by default. Writes are opt-in tiers (write → commit → external); tools above your tier are never shown to the model.
  • Real human confirmation. Finalizing, booking, cancelling or emailing asks _you_, in your client or on an approval page in your browser. The model cannot approve itself.
  • No surprise side effects. Previewing a PDF never marks an invoice as sent, writes are never retried, and every write is read back and can go to a local audit log.
  • Correct for sevDesk Update 2.0. Tax rules and booking accounts are validated before anything is sent.
  • Compact, typed output. Aggregations run on the server, so the model doesn't page through hundreds of records; the fields are described in the tool reference.

Quick start

You need a sevDesk plan with API access (Buchhaltung Pro; the free trial includes it), the API token of a sevDesk user (Settings → Users → API token; ideally a user just for the assistant) and, except for the Claude Desktop extension, Node.js 22.12 or later.

  • Claude Desktop: download mcp-server-sevdesk- .mcpb from the latest release, open it and paste your token (details).
  • Claude Code: store the token in the OS keychain, then add the server, or install the plugin:
  npx -y mcp-server-sevdesk token set work

claude mcp add --env SEVDESK_API_TOKEN_KEYCHAIN=work --scope user sevdesk -- npx -y mcp-server-sevdesk

  • Cursor, VS Code, Windsurf, Codex, Zed and others start npx -y mcp-server-sevdesk with the token in the environment; Clients has the exact file for each.
  • claude.ai and the Claude mobile apps connect to a server you host in remote mode.

Then ask _"What is my sevDesk account set up like?"_. The server starts read-only; the quickstart guide continues with enabling writes, a dry run first, and keeping the token safe.

What it can do

102 tools across 10 toolsets. The 44 read tools fill the first column; with the write tiers enabled, 58 more tools create and change data.

AreaReadWrite (write, commit, external)
AccountAccount overview and reference data: tax rules, booking accounts, units, countries
Invoices, credit notes, ordersList and get; PDFs and e-invoice XML as MCP resources; an e-invoice readiness check for outgoing invoicesDrafts, including orders (Angebot, Auftragsbestätigung, Lieferschein), invoices from orders, credit notes from invoices and dunning reminders (Mahnungen). Finalize, book payments, enshrine (festschreiben, irreversible), reset, cancel (Storno). Send by email
Vouchers (Belege)List and get; parse received e-invoices locally (XRechnung UBL/CII, ZUGFeRD/Factur-X)Drafts with the receipt file attached, imports from an e-invoice, drafts from sevDesk's own receipt recognition. Finalize, book payments, enshrine, reset, delete drafts
BankingAccounts, transactions and private-transaction rules; reconciliation suggestions from the amount, the invoice number in the purpose, the counterparty and splitsBook a transaction to documents (split payments, no over-booking), mark it private (Privatentnahme/-einlage), undo it. Enter, delete and enshrine file-import transactions. Create file-import or clearing accounts; create and delete private-transaction rules
ReportsSummaries, receivables and payables aging, cash position, changes since a date, a VAT summary (UStVA boxes, ZM, OSS), an EÜR-style profit and loss, a tax-rule helper for sales and a VAT-ID checkThe DATEV export (Buchungsstapel ZIP or XML with receipt images, never enshrined) and its settings; invoice or voucher PDF archives as one ZIP
Contacts and partsSearch and get, parts with their stock (Lagerbestand)Create and update, including a person's organisation (Ansprechpartner), removing single addresses and e-mails, and a part's stock and stockEnabled. Delete contacts
Advanced (off by default)sevdesk_api_get: a read-only GET of any sevDesk endpoint no other tool covers, such as text templates. It refuses everything that could change data, return files or start jobs

Invoices, credit notes, orders and vouchers can carry tags (projects, customers, branches): sevdesk_tags_list shows each tag with its uses, the four list tools filter by tag, and sevdesk_document_tag (tier write) adds a tag to one document or removes it. Invoice, voucher and credit note drafts take a cost centre (Kostenstelle) by id, number or name, and their three lists filter by it. The summary and the profit and loss filter and group by tag and by cost centre ("what did project X cost?").

The VAT summary is clearly marked as an estimate (accrual or cash basis). The audits (sevdesk_records_audit) answer "what is wrong?": foreign suppliers and customers whose VAT treatment does not fit, the §13b base by tax rule, vouchers booked twice and stuck drafts, and missing bills of suppliers that bill every month, quarter or year, each finding with its documents, its legal basis and what to check; they are hints, not tax advice. Where the server reads a local folder (SEVDESK_FILE_DIRS), sevdesk_receipt_folder_check compares its receipt files with those attached to the vouchers in sevDesk by checksum and names the files probably never booked. Every write tool accepts dryRun: true and then only returns exactly what it would do. Voucher drafts can be in a foreign currency, with an exchange rate or a rate date; such drafts cannot be finalized through the server (Receipts). The full generated reference is docs/tools.md.

Prompts

Ready-made workflows as MCP prompts. Clients list them next to the tools; in Claude Code they are slash commands such as /mcp__sevdesk__month_end_close.

PromptWhat it doesArguments
month_end_closeMonatsabschluss: changes, unbooked transactions, drafts, receivables and payables, VAT pre-check, profit, DATEV hand-overmonth (YYYY-MM, default: previous month)
receipt_intakeBeleg erfassen, E-Rechnung importieren: duplicate check, booking account and tax rule, voucher draft, finalize, paymentfile (optional)
dunning_runMahnlauf: overdue invoices, unbooked incoming payments, reminder draftscontact (name/id), minDaysOverdue (0–3650 days); both optional
vat_precheckUStVA-Vorprüfung: unbooked transactions and drafts, VAT summary (Kennzahlen), ZMperiod (YYYY-MM or YYYY-Qn)

| bank_reconciliation | Kontoabgleich: suggestions, bookings, private transactions, corrections | checkAccount (name/id), month (YYYY-

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요