프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Exiftool

제작자: joshmsimpson버전 0.1.6i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.joshmsimpson/exiftool

설치

개요

제작자가 쓴 설명(영어 원문)

Read, write, and remove metadata from 150+ file formats using ExifTool

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • PyPIPython의 uv 설치(uvx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "exiftool": {
      "command": "uvx",
      "args": [
        "exiftool-mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add exiftool -- uvx exiftool-mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "exiftool": {
      "command": "uvx",
      "args": [
        "exiftool-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "exiftool": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "exiftool-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 joshmsimpson 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32435개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32435개 중 0%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32435개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Exiftool, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.1.6)은 13개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, Apify MCP Server

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

Apify MCP Server

제작자: apify

Extract data from any website with thousands of scrapers, crawlers, and automations on Apify Store ⚡

클라우드에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

MCP ExifTool Server

mcp-name: io.github.joshmsimpson/exiftool

An MCP (Model Context Protocol) server that provides access to ExifTool for reading, writing, and removing metadata from a wide range of file types.

Features

  • Read metadata from over 150 file formats
  • Write metadata to files with automatic backup creation
  • Remove metadata selectively or completely from files
  • Extract specific tags or retrieve all available metadata
  • Support for multiple metadata standards: EXIF, IPTC, XMP, GPS, and manufacturer-specific formats
Supported File Formats

Image Formats:

  • RAW Camera Formats: ARW, CR2, CR3, CRW, DNG, ERF, FFF, GPR, IIQ, K25, KDC, MEF, MRW, NEF, NRW, ORF, PEF, RAF, RAW, RW2, RWL, SR2, SRF, SRW, X3F
  • Raster Images: BMP, FLIF, GIF, HDR, HEIC, HEIF, JPEG, JPEG 2000, JXL, JXR, PCX, PGF, PNG, PPM, TIFF, WebP
  • Specialized Images: AVIF, BPG, DPX, EXR, FITS, FLIR, FPX, ICO, LFP, MIFF, PSD, PSP, QTIF, SVG

Video Formats:

  • Containers: 3GP, AVI, F4V, FLV, GLV, M2TS, MOV, MP4, MKV, MPEG, R3D, VOB, WebM, WTV
  • Other Video: DV, DVR-MS, INSV, LRV, MQV

Audio Formats:

  • Lossless: AIFF, FLAC, LA, OFR, PAC, WAV, WV
  • Lossy: AAC, APE, DSF, M4A, MP3, MPC, OGG, OPUS, RA, WMA

Document Formats:

  • Office: DOC, DOCX, XLSX, PPTX, XLS, KEY, NUMBERS, PAGES
  • Other Documents: PDF, EPS, RTF, TXT, XML, JSON
  • eBooks: EPUB, MOBI, AZW

Archive Formats:

  • 7z, GZ, RAR, ZIP

Other Formats:

  • Fonts: AFM, OTF, PFA, TTF
  • And many more specialized formats

Prerequisites

ExifTool must be installed on your system. This MCP server is a wrapper that calls the ExifTool command-line tool.

Installing ExifTool

macOS:

brew install exiftool

Ubuntu/Debian:

sudo apt-get install libimage-exiftool-perl

Windows: Download from https://exiftool.org/

Verify installation:

exiftool -ver

Installation

pip install exiftool-mcp

Usage

With Claude Desktop

Add this to your claude_desktop_config.json:

{

"mcpServers": { "exiftool": { "command": "exiftool-mcp" } } }

With Other MCP Clients

The server communicates via stdio and follows the Model Context Protocol specification.

Available Tools

read_metadata

Read metadata from a file using ExifTool.

Parameters:

  • file_path (required): Path to the file (absolute or relative)
  • tags (optional): Array of specific metadata tags to extract (e.g., ["DateTimeOriginal", "Make", "Model"])

Example:

{

"file_path": "/path/to/image.jpg", "tags": ["DateTimeOriginal", "Make", "Model", "GPSLatitude", "GPSLongitude"] }

write_metadata

Write or update metadata tags in a file using ExifTool. Creates a backup by default.

Parameters:

  • file_path (required): Path to the file (absolute or relative)
  • tags (required): Dictionary of metadata tags to write (e.g., {"Artist": "John Doe", "Copyright": "2025"})
  • overwrite_original (optional): If true, overwrites the original file without creating a backup. Default is false.

Example:

{

"file_path": "/path/to/image.jpg", "tags": { "Artist": "John Doe", "Copyright": "2025", "Comment": "Beautiful sunset" }, "overwrite_original": false }

remove_metadata

Remove metadata from a file using ExifTool. Can remove all metadata or specific tags.

Parameters:

  • file_path (required): Path to the file (absolute or relative)
  • tags (optional): Array of specific metadata tags to remove (e.g., ["GPS*", "Comment"]). If not specified, all metadata is removed.
  • overwrite_original (optional): If true, overwrites the original file without creating a backup. Default is false.

Example:

{

"file_path": "/path/to/image.jpg", "tags": ["GPS*", "Location*"], "overwrite_original": false }

list_supported_formats

List all file formats supported by ExifTool.

Parameters: None

Examples

Reading all metadata from an image
Use the read_metadata tool with file_path: "photo.jpg"
Reading specific EXIF tags
Use the read_metadata tool with:
  • file_path: "photo.jpg"
  • tags: ["DateTimeOriginal", "Make", "Model", "LensModel"]
Writing metadata to a file
Use the write_metadata tool with:
  • file_path: "photo.jpg"
  • tags: {"Artist": "Jane Smith", "Copyright": "2025", "Rating": "5"}
Removing GPS data from a photo
Use the remove_metadata tool with:
  • file_path: "photo.jpg"
  • tags: ["GPS*"]
Removing all metadata from a file
Use the remove_metadata tool with:
  • file_path: "photo.jpg"

(no tags specified removes all metadata)

Checking supported formats
Use the list_supported_formats tool

Development

Setup
git clone https://github.com/joshmsimpson/exiftool_mcp.git

cd exiftool_mcp pip install -e .

Running locally
python -m exiftool_mcp.server

License

MIT

Contributing

Contributions are welcome! Please feel free to submit a Pull Request.

Links

PopNx에게 묻기