World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MCP server for Alicat mass flow and pressure meters/controllers.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 7/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 7/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Alicat Mass Flow & Pressure Controller 설치해 줘. https://mcp.popnx.com/i/k-dense-ai-labmcp-alicat.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Alicat Mass Flow & Pressure Controller을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "labmcp-alicat": { "command": "uvx", "args": [ "labmcp-alicat" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Alicat Mass Flow & Pressure Controller의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"labmcp-alicat": {
"command": "uvx",
"args": [
"labmcp-alicat"
]
}
}
}Alicat Mass Flow & Pressure Controller을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Alicat Mass Flow & Pressure Controller을 쓰고 있다고 하거나 답에 Alicat Mass Flow & Pressure Controller 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025) LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요). LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다. LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Alicat Mass Flow & Pressure Controller에 연결할 수 없어요
Alicat Mass Flow & Pressure Controller는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Alicat Mass Flow & Pressure Controller에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Alicat Mass Flow & Pressure Controller을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user labmcp-alicat -- uvx labmcp-alicat 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Alicat Mass Flow & Pressure Controller의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user labmcp-alicat -- uvx labmcp-alicatAlicat Mass Flow & Pressure Controller이 목록에 있고 연결됨으로 보이면 돼요
Alicat Mass Flow & Pressure Controller을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Alicat Mass Flow & Pressure Controller을 쓰고 있다고 하거나 답에 Alicat Mass Flow & Pressure Controller 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025) LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요). LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다. LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Alicat Mass Flow & Pressure Controller을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "labmcp-alicat": { "command": "uvx", "args": [ "labmcp-alicat" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Alicat Mass Flow & Pressure Controller의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Alicat Mass Flow & Pressure Controller을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Alicat Mass Flow & Pressure Controller을 쓰고 있다고 하거나 답에 Alicat Mass Flow & Pressure Controller 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025) LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요). LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다. LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Alicat Mass Flow & Pressure Controller을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "labmcp-alicat": { "type": "stdio", "command": "uvx", "args": [ "labmcp-alicat" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Alicat Mass Flow & Pressure Controller의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Alicat Mass Flow & Pressure Controller을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Alicat Mass Flow & Pressure Controller을 쓰고 있다고 하거나 답에 Alicat Mass Flow & Pressure Controller 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025) LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요). LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다. LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user labmcp-alicat -- uvx labmcp-alicatClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"labmcp-alicat": {
"command": "uvx",
"args": [
"labmcp-alicat"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"labmcp-alicat": {
"command": "uvx",
"args": [
"labmcp-alicat"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"labmcp-alicat": {
"type": "stdio",
"command": "uvx",
"args": [
"labmcp-alicat"
]
}
}
}LABMCP_ADDRESS envLABMCP_SIMULATE envLABMCP_READ_ONLY envLABMCP_LIMITS env설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
pypi: labmcp-alicat이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 18일 점검
레지스트리 이름이 GitHub 계정 K-Dense-AI 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 2개월 전
Apache-2.0 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 labmcp-alicat@0.1.2 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-alicat)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 2개월 전 변경됐고, 최신 버전(0.1.2)은 2개월 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 Alicat Mass Flow & Pressure Controller | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | Apache-2.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Let an AI agent read gas flow, pressure and temperature, set flow or pressure setpoints, switch the gas calibration, tare, and hold or close valves on Alicat Scientific mass flow meters and controllers and pressure controllers through Alicat's documented ASCII serial protocol.
| Package | labmcp-alicat |
| Instruments | Mass flow controllers (MC, MCR, MCS, MCE, MCV, MCW, ...), mass flow meters (M, MS, MW, ...), pressure controllers and gauges (PC, PCD, P), liquid flow devices (L, LC): any Alicat with RS-232/RS-485 ASCII serial (not Modbus/Profibus/EtherNet/IP builds) |
| Interfaces | RS-232, RS-485 (up to 26 devices per port, unit IDs A-Z), USB (virtual COM port), Ethernet via a serial-to-Ethernet bridge |
| Protocol | Alicat ASCII serial (Serial Communications Primer, Rev. 2, Feb 2023; Operating Manual DOC-MANUAL-MPL, Rev. 2, "Digital Control") |
| Status | 🧪 simulated: tested against a wire-level Alicat simulator, not yet verified on hardware. Report a hardware test |
uvx labmcp-alicat --simulate --check
The simulator is an MC-500SCCM-D on firmware 10v20 flowing N2, with a first-order flow response, a small sensor zero offset (remove it with tare_flow) and realistic data frames.
@ streaming).get_device_info warns about this).uvx labmcp ports uvx labmcp-alicat --address /dev/ttyUSB0 --check # Linux
uvx labmcp-alicat --address /dev/tty.usbserial-XXXX --check # macOS uvx labmcp-alicat --address COM4 --check # Windows uvx labmcp-alicat --address COM4 --option unit_id=B --check # device B on a shared bus uvx labmcp-alicat --address tcp://192.168.1.60:4001 --check # serial-to-Ethernet bridge
Non-default baud rates go in the address: `serial://COM4?baudrate=115200`.
Claude Code
claude mcp add alicat -- uvx labmcp-alicat --address /dev/ttyUSB0
Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)
{
"mcpServers": { "alicat": { "command": "uvx", "args": ["labmcp-alicat", "--address", "/dev/ttyUSB0", "--limit", "max_setpoint=200"] } } }
Add --read-only to allow reading flow but block setpoints, gas changes, tares and valve holds (close_valve stays available). For several devices on one bus, add one server entry per unit ID (--option unit_id=A, --option unit_id=B, ...). For other clients, generate the snippet with uvx labmcp config alicat --address /dev/ttyUSB0 --client vscode.
| Tool | Kind | Description |
|---|---|---|
close_valve | 🛑 safety | Stop the flow: set the flow setpoint to 0 and hold all valves closed (Alicat HC). Safe to call at any time. On pressure controllers the pressure setpoint is left unchanged and the valves are held closed, trapping the current pressure. |
get_command_log | 👁 read | Return the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done. |
get_connection_info | 👁 read | Report which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first. |
get_device_info | 👁 read | Report model, serial number, firmware, calibration date, whether the device is a controller, the units of every data-frame field, the setpoint full scale and setpoint source. |
hold_valve | 🎛 control | Freeze the controller's valve(s) at their current position (HLD): closed-loop control stops, so flow will drift if upstream pressure changes. Use resume_control to release, or close_valve to shut off completely. |
list_gases | 👁 read | List the gases installed on this mass flow device (number and short name), as used by set_gas. Liquid and pressure-only devices have no gas list. |
log_flow_series | 👁 read | Record a time series of data frames (e.g. to check flow stability, settling after a setpoint change, or pressure drift). Returns every point plus mean/stdev/min/max of the mass flow (or the main measured quantity for non-flow devices). |
read_flow | 👁 read | Read the live data frame: mass flow, volumetric flow, pressure, temperature, setpoint (controllers), active gas and any status codes, each with the device's engineering units. |
reconnect | 🛑 safety | Close and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged). |
resume_control | ⚠️ hazard | Cancel any valve hold and resume closed-loop control to the current setpoint. Flow restarts immediately if the setpoint is not 0 (check it with read_flow first). |
set_flow_setpoint | ⚠️ hazard | Change the controller setpoint: starts, changes or stops gas flow (or sets the target pressure on a pressure controller). 0 stops flow and closes the valve on a flow controller. Negative values only work on bidirectional controllers. Refused on meters, above the max_setpoint limit, and above the device's full scale. |
set_gas | 🎛 control | Select the gas calibration the mass flow device uses (Gas Select). This changes how flow is computed, so do it with the setpoint at 0. Only gases installed on the device work (see list_gases); corrosive gases need anti-corrosive (S-series) hardware. |
tare_flow | 🎛 control | Tare (zero) the flow reading. ONLY run with no flow through the device: upstream shut off or controller setpoint 0, with the line at its normal operating pressure. Refused if the setpoint is not 0 or a significant flow is still being measured. |
tare_pressure | 🎛 control | Tare a pressure reading. Requires no flow and the device OPEN TO ATMOSPHERE (gauge), or no flow and an unpressurised process line (absolute, barometer-equipped devices only). |
get_connection_info, get_command_log and reconnect are built into every LabMCP server.
| Limit | Default | Meaning |
|---|---|---|
max_setpoint | 100 (device units) | Largest setpoint magnitude an agent may send, in the controller's own setpoint units (SCCM, SLPM, PSIA, ... as shown by get_device_info). Setpoints above the device's full scale are refused as well. |
max_series_duration_s | 600 s | Longest logging series an agent may start (never more than 850 s, so a series always finishes within one tool call) |
Override at launch, e.g. --limit max_setpoint=500. The default of 100 is deliberately conservative: on a 500 SCCM controller it caps the agent at 100 SCCM until you raise it.
??D*) and parses every poll against it, so field names, order and engineering units come from the device itself (both the 6v+ column table and the older pre-6v table are understood). If a device does not answer ??D*, frames are parsed by position using the default layouts in the Serial Primer (p. 8) and the manual; layout_source in every reading says which method was used.LS on firmware 9v00+ and S on older firmware. After every change the reply is checked: if the controller reports a different requested setpoint (out of range, negative on a unidirectional device, or an analog setpoint source), the tool reports an error with what the device is now using.HC (hold valves closed, firmware 5v07+), and confirms HLD in the reply. On a pressure controller it only sends HC, because a 0 pressure setpoint can *open* valves depending on the zero-pressure-control setting (Serial Primer p. 17). resume_control (C) releases the hold; it is marked as a hazard because flow restarts at the current setpoint.tare_flow and tare_pressure refuse if a flow controller's setpoint is not 0, or if the device still reads more than 2% of full scale. They cannot detect every unsafe situation (e.g. a meter with a small real flow), so still shut the gas off first. Gauge-pressure tares need the port open to atmosphere; absolute tares need the barometer option and an unpressurised line..csv file: ~ is expanded, missing folders are created, and an existing file is never overwritten. The path is checked before logging starts.GS (10v05+, not saved as the power-up gas unless save_as_power_up) or the older G. Only gases installed on the device are accepted; list_gases shows them.A49408) is Alicat's legacy *integer setpoint* command. The driver refuses to send anything of that shape.$$ after the unit ID), streaming mode (@), Modbus/Profibus/EtherNet/IP variants, totalizer, batching, PID tuning and COMPOSER mix creation.| Model | Firmware | Interface | Verified by | Date |
|---|---|---|---|---|
| *none yet: be the first* |