프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Keithley SourceMeter SMU

제작자: K-Dense-AI버전 0.1.2i★ 32 (저장소 전체의 별)i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.K-Dense-AI/labmcp-keithley-smu

설치 방법

What it does

MCP server for Keithley SourceMeter SMUs (2400 series SCPI, 2450 family SCPI, 2600B TSP).

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 기타

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성7/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수7/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Keithley SourceMeter SMU 설치해 줘. https://mcp.popnx.com/i/k-dense-ai-labmcp-keithley-smu.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server Keithley SourceMeter SMU을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "labmcp-keithley-smu": { "command": "uvx", "args": [ "labmcp-keithley-smu" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Keithley SourceMeter SMU의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  3. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "labmcp-keithley-smu": {
          "command": "uvx",
          "args": [
            "labmcp-keithley-smu"
          ]
        }
      }
    }
  4. Claude를 끄고 다시 열기

  5. 해 보기

    Keithley SourceMeter SMU을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Keithley SourceMeter SMU을 쓰고 있다고 하거나 답에 Keithley SourceMeter SMU 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Keithley SourceMeter SMU에 연결할 수 없어요

Keithley SourceMeter SMU는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Keithley SourceMeter SMU에 연결되는 앱 쓰기

  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

B · 기타에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Keithley SourceMeter SMU을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user labmcp-keithley-smu -- uvx labmcp-keithley-smu 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Keithley SourceMeter SMU의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  3. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user labmcp-keithley-smu -- uvx labmcp-keithley-smu
  4. Claude Code에서 /mcp 입력

    Keithley SourceMeter SMU이 목록에 있고 연결됨으로 보이면 돼요

  5. 해 보기

    Keithley SourceMeter SMU을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Keithley SourceMeter SMU을 쓰고 있다고 하거나 답에 Keithley SourceMeter SMU 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Keithley SourceMeter SMU을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "labmcp-keithley-smu": { "command": "uvx", "args": [ "labmcp-keithley-smu" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Keithley SourceMeter SMU의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  3. Cursor에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Keithley SourceMeter SMU을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Keithley SourceMeter SMU을 쓰고 있다고 하거나 답에 Keithley SourceMeter SMU 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Keithley SourceMeter SMU을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "labmcp-keithley-smu": { "type": "stdio", "command": "uvx", "args": [ "labmcp-keithley-smu" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Keithley SourceMeter SMU의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  3. VS Code에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Keithley SourceMeter SMU을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Keithley SourceMeter SMU을 쓰고 있다고 하거나 답에 Keithley SourceMeter SMU 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Keithley SourceMeter SMU을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user labmcp-keithley-smu -- uvx labmcp-keithley-smu

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "labmcp-keithley-smu": {
      "command": "uvx",
      "args": [
        "labmcp-keithley-smu"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "labmcp-keithley-smu": {
      "command": "uvx",
      "args": [
        "labmcp-keithley-smu"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "labmcp-keithley-smu": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "labmcp-keithley-smu"
      ]
    }
  }
}

직접 입력할 값

  • LABMCP_ADDRESS env
    계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE env
    1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY env
    1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS env
    안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

GitHub 스타i
32 (저장소 전체의 별)
이 저장소에는 MCP 항목이 여러 개 있어 별은 순위에서 한 번만 세요
주간 다운로드i
33/주
라이선스i
Apache-2.0
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.1.2
카테고리i
기타
레지스트리 공개i
2026년 9월 27일
코드 마지막 변경i
2026년 9월 27일
제작자
K-Dense-AI
패키지
pypi: labmcp-keithley-smu
웹사이트
github.com
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 K-Dense-AI 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 2개월 전

  • ✓ 통과

    라이선스 있음

    Apache-2.0 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 labmcp-keithley-smu@0.1.2 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/k-dense-ai-labmcp-keithley-smu.svg)](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-keithley-smu)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 20653개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 20653개 중 45%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 20653개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Keithley SourceMeter SMU, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 2개월 전 변경됐고, 최신 버전(0.1.2)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

제작자: koala73널리 사용됨★ 9.1만3일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

제작자: openstatusHQ널리 사용됨★ 9.3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

제작자: Klavis-AI성장 중★ 5.8천14개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

제작자: jitsucom널리 사용됨★ 5.1천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · jitsu.com
비슷한 항목과 비교
이 항목
Keithley SourceMeter SMU
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/44/44/41/44/4
라이선스Apache-2.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Keithley SourceMeter SMU — MCP Server

Let an AI agent source voltage or current with a compliance limit, measure V and I, and run bounded IV sweeps (linear, log, dual) on Keithley (Tektronix) SourceMeter SMUs. Every sweep ends with the output switched off, even when something goes wrong. The server speaks all three Keithley remote dialects: 2400-series SCPI, 2450-family SCPI, and 2600B TSP.

Packagelabmcp-keithley-smu
Instruments2400, 2400-LV, 2401, 2410, 2420, 2425, 2430 (DC mode), 2440 · 2450, 2460, 2461, 2470 (SCPI command set) · 2601B, 2602B, 2604B, 2611B, 2612B, 2614B, 2634B, 2635B, 2636B
InterfacesGPIB, USB (USBTMC), Ethernet (VXI-11 / raw socket 5025), RS-232 (2400 series), via VISA or tcp://
ProtocolSCPI: 2400 Series User's Manual 2400S-900-01 Rev. K §18, 2450 Reference Manual 2450-901-01 Rev. D §6. TSP: 2600B Reference Manual 2600BS-901-01 Rev. F §9
Status🧪 simulated: tested against wire-level simulators of all three dialects, not yet verified on hardware. Report a hardware test

Try it without hardware

uvx labmcp-keithley-smu --simulate --check                                   # 2450 + 1 kΩ resistor

uvx labmcp-keithley-smu --simulate --option dialect=2600 --option sim_dut=diode --check uvx labmcp-keithley-smu --simulate --option dialect=2400 --option sim_resistance_ohm=47 --check

The simulated DUT is a resistor (1 kΩ by default) or a 1N4148-like diode (Shockley equation, I_s = 2.52 nA, n = 1.752, R_s = 0.568 Ω). Compliance clamping behaves as on a real SMU.

Connect your SMU

  1. Instrument side.
  • 2400 series: GPIB (default address 24) or RS-232. For RS-232 set *MENU > COMMUNICATION > RS-232*: 9600 baud, 8 data bits, no parity, TERMINATOR LF, no flow control.
  • 2450 / 2460 / 2461 / 2470: use the SCPI command set (*MENU > System > Settings > Command Set > SCPI*, then reboot). If the instrument is in TSP mode the server stops with instructions. In SCPI2400 emulation mode it is driven with the 2400 dialect. Above ±21 V the 2450 needs its safety interlock closed.
  • 2600B: works as shipped (TSP). Leave localnode.prompts disabled (the default); prompts would be mixed into replies.
  1. Find the address: uvx labmcp ports (or python -m pyvisa info). GPIB and USBTMC need a VISA library with GPIB support. NI-VISA works everywhere; pyvisa-py covers USBTMC/LAN (and GPIB with gpib-ctypes/linux-gpib).
  2. Test the connection:
   uvx labmcp-keithley-smu --address GPIB0::24::INSTR --check

uvx labmcp-keithley-smu --address USB0::0x05E6::0x2450::04096331::INSTR --check uvx labmcp-keithley-smu --address tcp://192.168.1.50:5025 --check # 2450 / 2600B LAN uvx labmcp-keithley-smu --address TCPIP0::192.168.1.51::inst0::INSTR --option channel=b --check # 2602B, SMU B

   The dialect is detected from `*IDN?` (and `*LANG?` on the 2450 family). Force it with `--option dialect=2400|2450|2600`.

Add to your MCP client

Claude Code

claude mcp add smu -- uvx labmcp-keithley-smu --address GPIB0::24::INSTR --limit max_voltage_v=5 --limit max_current_a=0.02

Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)

{

"mcpServers": { "smu": { "command": "uvx", "args": ["labmcp-keithley-smu", "--address", "USB0::0x05E6::0x2450::04096331::INSTR", "--limit", "max_voltage_v=5", "--limit", "max_current_a=0.02"] } } }

Add --read-only to allow status and measurements but block configuration, output-on and sweeps (output_off stays available). For other clients, generate the snippet with uvx labmcp config keithley-smu --address --client vscode (also cursor, codex, claude-code).

Tools

ToolKindDescription
configure_source🎛 controlSet up the source (function, level, compliance, range, measurement speed) while the output is OFF. Measures V and I with auto-ranging. Refused if the output is on; turn it off first or use set_source_level. Limits are checked before anything is sent.
get_command_log👁 readReturn the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done.
get_connection_info👁 readReport which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first.
get_device_info👁 readIdentify the SMU: manufacturer, model, serial, firmware, command dialect (2400 / 2450 / 2600), channel (2600B) and the model's maximum source voltage and current.
get_status👁 readReport whether the output is on, the source function (voltage/current), programmed level, compliance limit, whether the source is in compliance, terminals and 2/4-wire sense.
measure👁 readTake one source-measure reading (voltage, current, V/I, power, compliance flag) of the energised DUT. Does not change any setting; refused if the output is off.
output_off🛑 safetySwitch the SMU output OFF immediately (and abort any IV sweep in progress). Always available, including in read-only mode.
output_on⚠️ hazardSwitch the SMU output ON: the configured voltage or current is applied to the DUT. The programmed level and compliance are read back from the instrument and checked against the safety limits first. Confirm with the user that the DUT is connected and safe to energise.
reconnect🛑 safetyClose and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged).
run_iv_sweep⚠️ hazardRun a stepped IV sweep: configure the source, switch the output ON, step through the levels measuring V and I at each, then ALWAYS switch the output OFF (also on errors or when output_off is called). Returns the curve (downsampled), compliance flags, a linear fit and optional full CSV (a new file; an existing file is never overwritten). The output must be off beforehand. Limits are checked first.
set_4wire🎛 controlSelect 4-wire (remote sense, Kelvin) or 2-wire measurement. 4-wire removes lead resistance for low-resistance DUTs but needs the SENSE leads connected. Refused while the output is on.
set_source_level⚠️ hazardChange the level of the configured source. If the output is ON the new voltage/current is applied to the DUT immediately. The level and the present compliance are checked against the safety limits first.

get_connection_info, get_command_log and reconnect are built into every LabMCP server.

Safety limits

LimitDefaultMeaning
max_voltage_v20 VLargest \voltage\an agent may source, or allow as voltage compliance
max_current_a0.1 ALargest \current\an agent may source, or allow as current compliance
max_power_w2 WLargest worst-case power \source level × compliance\
max_sweep_points501Most points in one IV sweep (the return leg of a dual sweep counts)
max_sweep_duration_s600 sLongest estimated sweep duration (points × (delay + 2·NPLC/50 s + 20 ms))

The limits are checked before anything is sent: by configure_source and set_source_level, by run_iv_sweep (on the largest \|start\|, \|stop\|), and by output_on, which reads the programmed level and compliance back from the instrument. A level set on the front panel is therefore caught too. Requests beyond the model's own maximum (e.g. 40 V on a 2602B) are also refused. Override at launch: --limit max_voltage_v=60 --limit max_power_w=10. Tighten the defaults for fragile DUTs.

Example prompts

  • "Measure the IV curve of this LED from 0 to 3 V in 61 steps with a 20 mA compliance, then tell me the turn-on voltage at 1 mA."
  • "Source 1 mA through the sample in 4-wire mode and give me its resistance; then turn the output off."
  • "Run a dual sweep from −1 V to +1 V on the memristor with 1 mA compliance and 0.1 s per point, and save it to ~/data/memristor_run3.csv."
  • "Do a log current sweep from 1 nA to 10 mA on the photodiode with a 2 V limit and fit the ideality factor."
  • "What is the SMU doing right now? If the output is on, turn it off."

Notes

  • Simple, verifiable commands. Sweeps are stepped loops: set the level, wait delay_s, take one reading, check compliance. Built-in instrument sweeps and trigger models are not used, so every point shows up in get_command_log. The output is switched off in a try/finally at the end of every sweep. Calling output_off while a sweep runs (even while it is still configuring) sets an abort flag and switches the output off at once; the sweep then stops without switching the output on again and reports aborted: true.
  • Sweep duration. Besides max_sweep_duration_s, one sweep can take at most 1740 s (the tool's 30-minute timeout minus a margin): longer estimates are refused, and a sweep that runs slower than estimated stops early with the output off and returns the points measured so far (stop_reason says why).
  • `save_path` must end in .csv and must not exist yet (an existing file is never overwritten); missing folders are created. It is checked before the output is switched on.
  • Overflow readings (the SMU's +9.9E37 marker) are returned as null in the sweep curve, counted in overflow_points and left out of the statistics and the fit; measure reports them as an error.
  • What is measured.
  • 2400: concurrent V and I (:SENS:FUNC:CONC ON, :SENS:FUNC "VOLT","CURR"), read with :READ? (:FORM:ELEM VOLT,CURR,STAT). Compliance comes from status-word bit 3.
  • 2450: the measure function is the non-sourced quantity, source readback is on, and :READ? "defbuffer1",SOUR,READ returns both. Compliance comes from :SOUR:VOLT:ILIM:TRIP? / :SOUR:CURR:VLIM:TRIP?.
  • 2600B: print(smuX.measure.iv()) and print(smuX.source.compliance).

In compliance, the reported V and I are the measured values, not the programmed level.

  • The 2400's `:MEAS?` turns the output on by itself (manual p. 18-72), so it is never used. measure refuses to run when the output is off.
  • Reconfiguration happens with the output off. configure_source and set_4wire refuse while the output is on. Use set_source_level (a hazard tool) to change a running source.
  • Output-off state (normal / zero / high-Z / guard) is left as configured on the instrument. With the default *normal* state, a current source turned off becomes a 0 V source. For batteries, charged capacitors or solar cells, select high-impedance first (2450 manual p. 6-40).
  • The 2460/2461/2470 maxima are not built in (their manuals weren't reviewed). The safety limits still apply, and the instrument rejects anything beyond its range. The 2430 pulse mode and the 2600B's limitp power compliance are not used.
  • Timing: NPLC sets the integration time (1 PLC = 16.7 ms at 60 Hz, 20 ms at 50 Hz). Source auto-delay stays at the instrument default (on), and delay_s adds settling time per point.
  • Simulator error replies follow the manuals' error lists (+802 "Not permitted with OUTPUT off", -222, -113; 2600B 1101 "Parameter too big", -285/-286). The exact message wording on real firmware may differ.

Hardware verification

ModelFirmwareInterfaceVerified byDate

| *none yet: [be the first](https://github.com/K-Dense-AI/lab-inst

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요