프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Opentrons OT-2 / Flex

제작자: K-Dense-AI버전 0.1.3i★ 32 (저장소 전체의 별)i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.K-Dense-AI/labmcp-opentrons

설치 방법

What it does

MCP server for Opentrons OT-2 and Flex liquid-handling robots (HTTP API).

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 기타

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성7/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수7/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Opentrons OT-2 / Flex 설치해 줘. https://mcp.popnx.com/i/k-dense-ai-labmcp-opentrons.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server Opentrons OT-2 / Flex을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "labmcp-opentrons": { "command": "uvx", "args": [ "labmcp-opentrons" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Opentrons OT-2 / Flex의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  3. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "labmcp-opentrons": {
          "command": "uvx",
          "args": [
            "labmcp-opentrons"
          ]
        }
      }
    }
  4. Claude를 끄고 다시 열기

  5. 해 보기

    Opentrons OT-2 / Flex을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Opentrons OT-2 / Flex을 쓰고 있다고 하거나 답에 Opentrons OT-2 / Flex 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Opentrons OT-2 / Flex에 연결할 수 없어요

Opentrons OT-2 / Flex는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Opentrons OT-2 / Flex에 연결되는 앱 쓰기

  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

B · 기타에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Opentrons OT-2 / Flex을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user labmcp-opentrons -- uvx labmcp-opentrons 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Opentrons OT-2 / Flex의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  3. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user labmcp-opentrons -- uvx labmcp-opentrons
  4. Claude Code에서 /mcp 입력

    Opentrons OT-2 / Flex이 목록에 있고 연결됨으로 보이면 돼요

  5. 해 보기

    Opentrons OT-2 / Flex을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Opentrons OT-2 / Flex을 쓰고 있다고 하거나 답에 Opentrons OT-2 / Flex 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Opentrons OT-2 / Flex을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "labmcp-opentrons": { "command": "uvx", "args": [ "labmcp-opentrons" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Opentrons OT-2 / Flex의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  3. Cursor에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Opentrons OT-2 / Flex을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Opentrons OT-2 / Flex을 쓰고 있다고 하거나 답에 Opentrons OT-2 / Flex 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Opentrons OT-2 / Flex을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "labmcp-opentrons": { "type": "stdio", "command": "uvx", "args": [ "labmcp-opentrons" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Opentrons OT-2 / Flex의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  3. VS Code에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Opentrons OT-2 / Flex을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Opentrons OT-2 / Flex을 쓰고 있다고 하거나 답에 Opentrons OT-2 / Flex 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Opentrons OT-2 / Flex을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user labmcp-opentrons -- uvx labmcp-opentrons

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "labmcp-opentrons": {
      "command": "uvx",
      "args": [
        "labmcp-opentrons"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "labmcp-opentrons": {
      "command": "uvx",
      "args": [
        "labmcp-opentrons"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "labmcp-opentrons": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "labmcp-opentrons"
      ]
    }
  }
}

직접 입력할 값

  • LABMCP_ADDRESS env
    계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025)
    영어 원문 보기Instrument address, e.g. serial:///dev/ttyUSB0 or tcp://192.168.1.50:5025
  • LABMCP_SIMULATE env
    1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요).
    영어 원문 보기Set to 1 to use the built-in simulator (no hardware)
  • LABMCP_READ_ONLY env
    1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다.
    영어 원문 보기Set to 1 to disable all state-changing tools
  • LABMCP_LIMITS env
    안전 한계값 재정의, 예: max_temperature_c=80
    영어 원문 보기Safety limit overrides, e.g. max_temperature_c=80

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

GitHub 스타i
32 (저장소 전체의 별)
이 저장소에는 MCP 항목이 여러 개 있어 별은 순위에서 한 번만 세요
주간 다운로드i
43/주
라이선스i
Apache-2.0
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.1.3
카테고리i
기타
레지스트리 공개i
2026년 9월 27일
코드 마지막 변경i
2026년 9월 27일
제작자
K-Dense-AI
패키지
pypi: labmcp-opentrons
웹사이트
github.com
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 K-Dense-AI 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 2개월 전

  • ✓ 통과

    라이선스 있음

    Apache-2.0 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 labmcp-opentrons@0.1.3 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/k-dense-ai-labmcp-opentrons.svg)](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-opentrons)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 20613개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 20613개 중 45%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 20613개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Opentrons OT-2 / Flex, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 2개월 전 변경됐고, 최신 버전(0.1.3)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

제작자: koala73널리 사용됨★ 9.1만3일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

제작자: openstatusHQ널리 사용됨★ 9.3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

제작자: Klavis-AI성장 중★ 5.8천14개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

제작자: jitsucom널리 사용됨★ 5.1천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · jitsu.com
비슷한 항목과 비교
이 항목
Opentrons OT-2 / Flex
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/44/44/41/44/4
라이선스Apache-2.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Opentrons OT-2 / Flex — MCP Server

Let an AI agent upload and check protocols, review the deck layout with you, start, pause, stop and resume runs, follow their progress, and read pipettes and modules on Opentrons Flex and OT-2 liquid-handling robots through the robot's documented HTTP API.

Packagelabmcp-opentrons
InstrumentsOpentrons Flex, Opentrons OT-2 (robot software 5.1 or newer)
InterfacesEthernet, Wi-Fi, USB (network over USB)
ProtocolOpentrons robot-server HTTP API on port 31950, Opentrons-Version: 3 (HTTP API guide, robot-server source; every robot also serves its spec at http:// :31950/openapi.json and /redoc)
Status🧪 simulated: tested against an in-memory robot-server simulator, not yet verified on hardware. Report a hardware test

Why this server rather than a generic HTTP wrapper: it refuses to start a run unless the robot's own protocol analysis passed, the user has confirmed the deck, the door is closed, the E-stop is released and module setpoints are within your limits. It exposes no single-move pipetting commands, keeps pause and stop available even in read-only mode, and records every HTTP request in the command log.

Try it without hardware

uvx labmcp-opentrons --simulate --check

uvx labmcp-opentrons --simulate --option sim_model=ot2 --check # simulate an OT-2

The simulator runs protocols in memory: Python protocols are compiled and scanned for labware, pipettes, modules and steps, runs go through the real status lifecycle, and module temperatures respond to the protocol.

Connect your robot

  1. Find the IP address: Opentrons App > Devices > your robot > Robot settings > Networking (or on the Flex touchscreen: Settings > Network). The robot must be on the same network as the computer running the MCP server. USB-connected robots also get an IP address (OT-2: 169.254.x.x).
  2. Test the connection:
   uvx labmcp-opentrons --address 192.168.1.20 --check

uvx labmcp-opentrons --address http://ot2-lab.local:31950 --check

   `--check` prints the robot's name, model, software and firmware versions.
  1. Access control (Flex only, rarely needed): if your Flex has access control enabled and requests fail with HTTP 401, pass a token with --option access_token= .

Add to your MCP client

Claude Code

claude mcp add opentrons -- uvx labmcp-opentrons --address 192.168.1.20

Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, …)

{

"mcpServers": { "opentrons": { "command": "uvx", "args": ["labmcp-opentrons", "--address", "192.168.1.20"] } } }

Add --read-only to let the agent monitor the robot (status, runs, protocols, modules) while blocking uploads, runs, homing and lights. pause_run, stop_run and deactivate_modules stay available. For other clients, generate the snippet with uvx labmcp config opentrons --address 192.168.1.20 --client vscode (also cursor, codex, claude-code).

Tools

ToolKindDescription
deactivate_modules🛑 safetySwitch attached modules off: stop heating/cooling (Temperature Module, Thermocycler block and lid, Heater-Shaker heater), stop shaking, and lower Magnetic Module magnets. Only possible when no run is in progress: stop the run first.
get_command_log👁 readReturn the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done.
get_connection_info👁 readReport which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first.
get_protocol👁 readShow a stored protocol's analysis: whether it is ready to run, analysis errors, the deck layout it expects (labware and modules per slot, pipettes per mount, liquids), the number of steps and the highest module temperature / shake speed it requests. Review this with the user before start_run.
get_robot_status👁 readReport the robot's name, model (Flex/OT-2), software and firmware versions, lights, door and E-stop state, and the current run. Call this first to check the robot is ready.
get_run_status👁 readReport a run's status, the step it is on, progress, recent steps and any errors, plus advice on what to do next (e.g. when the run is waiting for error recovery).
home_robot⚠️ hazardHome all axes of the robot (the gantry and pipettes move to their home positions). Refused while a run is active. Make sure nothing is in the robot's path and the door is closed.
list_instruments👁 readList attached pipettes (and the Flex gripper): mount, name, channels, volume range, and whether a tip is detected and calibration data exists.
list_modules👁 readList attached modules (Temperature Module, Heater-Shaker, Thermocycler, Magnetic Module, Absorbance Plate Reader, ...) with live temperatures, targets, shake speed and status.
list_protocols👁 readList protocols stored on the robot (newest last) with their analysis status and result.
list_runs👁 readList recent protocol runs, newest first, with their status.
pause_run🛑 safetyPause a running protocol. The robot finishes its current step and then holds; resume_run continues it.
reconnect🛑 safetyClose and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged).
resume_run⚠️ hazardResume a paused run (the robot starts moving again), or leave error recovery. Refused while the door is open. For a run awaiting recovery, error_recovery must be given.
set_lights🎛 controlTurn the robot's deck (rail) lights on or off.
start_run⚠️ hazardCreate a run of an analyzed protocol and start it: the robot begins moving and pipetting. Refused unless the protocol's analysis completed without errors, its module setpoints are within the safety limits, no other run is active, the door is closed and the E-stop is released.
stop_run🛑 safetyStop (cancel) a run immediately. A stopped run cannot be resumed; the robot homes and drops any attached tips into the trash. Use this whenever something looks wrong.
upload_protocol🎛 controlUpload a protocol file (plus optional custom labware) to the robot. The robot analyzes it (simulates it) and this tool returns the analysis: errors, deck layout and whether it is ready to run. Uploading does not move the robot. Uploading identical files returns the existing protocol.

get_connection_info, get_command_log and reconnect are built into every LabMCP server. get_command_log shows every HTTP request sent to the robot and its reply.

Safety limits

LimitDefaultMeaning
max_module_temperature_c110 °CHighest temperature (Temperature Module, Thermocycler block or lid, Heater-Shaker) a protocol may request; start_run refuses protocols above it
max_shake_speed_rpm3000 rpmFastest Heater-Shaker speed a protocol may request

The defaults are the hardware maxima. Tighten them for heat-sensitive plastics or samples: --limit max_module_temperature_c=70 --limit max_shake_speed_rpm=1500. The check reads the setpoints from the robot's analysis of the protocol (every celsius and rpm value in module commands, including thermocycler profiles).

Other safety interlocks built into start_run:

  • the robot's analysis must have completed with result ok (pending, failed or parameter-required analyses are refused, and the errors are shown);
  • deck_confirmed=true is required, which the agent should only pass after you confirmed the deck matches the layout from get_protocol;
  • no other run may be active, the Flex door must be closed and the E-stop released.

Example prompts

  • "Upload ~/protocols/serial_dilution.py to the Flex and tell me whether the analysis passed. What labware do I need where?"
  • "The deck is set up as you listed. Start the serial dilution run and tell me when it's halfway."
  • "What is the robot doing right now? How many steps are left?"
  • "Pause the run — I need to top up the reservoir." … "OK, resume."
  • "The run says a tip is missing. I've refilled the tip rack in slot C2; continue the run."
  • "The PCR finished. Turn off the thermocycler and the heater-shaker, then switch the lights off."

Notes

  • Protocols, not single moves. This server runs complete protocols that the robot has analyzed. It deliberately has no tools for individual pipetting or gantry moves (POST /runs/{id}/commands), because without full deck state these can crash pipettes into labware. That may come later behind stricter checks.
  • Labware Position Check offsets are not applied. Runs created through the HTTP API do not include the offsets the Opentrons App applies from Labware Position Check. If your setup depends on them, start the run from the App, or set offsets in the protocol (labware.set_offset(...)).
  • Run-time parameters use their default values. Protocols that need a value this server cannot give (e.g. a CSV file parameter) are reported as not ready.
  • Stopping a run is final: the robot homes and drops tips in the trash. Pausing waits for the current step to finish.
  • Error recovery (recent robot software, mainly Flex): when a step fails (e.g. no tip detected), the run waits in awaiting-recovery. resume_run(error_recovery="continue") continues from the robot's actual state and skips the failed step; "assume_false_positive" treats the failure as a false alarm. Only use either after someone has checked the robot.
  • Modules stay on after a protocol ends unless the protocol switches them off. deactivate_modules sends the robot's stateless deactivate commands (POST /commands), which the robot only accepts when no run is in progress.
  • list_instruments uses GET /instruments, which the robot fully supports on Flex; on an OT-2 it returns pipettes with less detail (no calibration data).
  • The HTTP API version is pinned with the Opentrons-Version: 3 header, as in Opentrons' integration examples. Override with --option api_version=4 if needed.

Hardware verification

ModelRobot softwareInterfaceVerified byDate
*none yet: be the first*