World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MCP server for SRS RGA100/200/300 residual gas analyzers.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 7/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 7/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
SRS Residual Gas Analyzer 설치해 줘. https://mcp.popnx.com/i/k-dense-ai-labmcp-srs-rga.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server SRS Residual Gas Analyzer을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "labmcp-srs-rga": { "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 SRS Residual Gas Analyzer의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"labmcp-srs-rga": {
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}SRS Residual Gas Analyzer을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 SRS Residual Gas Analyzer을 쓰고 있다고 하거나 답에 SRS Residual Gas Analyzer 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025) LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요). LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다. LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 SRS Residual Gas Analyzer에 연결할 수 없어요
SRS Residual Gas Analyzer는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · SRS Residual Gas Analyzer에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server SRS Residual Gas Analyzer을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rga 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 SRS Residual Gas Analyzer의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rgaSRS Residual Gas Analyzer이 목록에 있고 연결됨으로 보이면 돼요
SRS Residual Gas Analyzer을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 SRS Residual Gas Analyzer을 쓰고 있다고 하거나 답에 SRS Residual Gas Analyzer 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025) LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요). LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다. LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server SRS Residual Gas Analyzer을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "labmcp-srs-rga": { "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 SRS Residual Gas Analyzer의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
SRS Residual Gas Analyzer을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 SRS Residual Gas Analyzer을 쓰고 있다고 하거나 답에 SRS Residual Gas Analyzer 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025) LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요). LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다. LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server SRS Residual Gas Analyzer을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "labmcp-srs-rga": { "type": "stdio", "command": "uvx", "args": [ "labmcp-srs-rga" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 SRS Residual Gas Analyzer의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
uv --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version
한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다
SRS Residual Gas Analyzer을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 SRS Residual Gas Analyzer을 쓰고 있다고 하거나 답에 SRS Residual Gas Analyzer 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
LABMCP_ADDRESS 계측기 주소(예: serial:///dev/ttyUSB0 또는 tcp://192.168.1.50:5025) LABMCP_SIMULATE 1로 설정하면 내장 시뮬레이터를 사용합니다(하드웨어 불필요). LABMCP_READ_ONLY 1로 설정하면 상태를 변경하는 모든 도구를 비활성화합니다. LABMCP_LIMITS 안전 한계값 재정의, 예: max_temperature_c=80 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user labmcp-srs-rga -- uvx labmcp-srs-rgaClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"labmcp-srs-rga": {
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"labmcp-srs-rga": {
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"labmcp-srs-rga": {
"type": "stdio",
"command": "uvx",
"args": [
"labmcp-srs-rga"
]
}
}
}LABMCP_ADDRESS envLABMCP_SIMULATE envLABMCP_READ_ONLY envLABMCP_LIMITS env설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
pypi: labmcp-srs-rga이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 K-Dense-AI 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 2개월 전
Apache-2.0 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 labmcp-srs-rga@0.1.1 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/k-dense-ai-labmcp-srs-rga)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 2개월 전 변경됐고, 최신 버전(0.1.1)은 2개월 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 SRS Residual Gas Analyzer | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | Apache-2.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Let an AI agent read the residual gas composition of a vacuum system with a Stanford Research Systems RGA100, RGA200 or RGA300 quadrupole mass spectrometer: partial pressures at chosen m/z, analog and histogram spectra, total pressure, helium leak checks and a first-pass identification of the gases (water, hydrogen, nitrogen/CO, oxygen, argon, CO2, hydrocarbons). The filament, the electron multiplier (CDEM) and the ionizer degas are protected by server-side pressure interlocks.
| Package | labmcp-srs-rga |
| Instruments | SRS RGA100 (1-100 amu), RGA200 (1-200 amu), RGA300 (1-300 amu), with or without the CDEM option (01) |
| Interfaces | RS-232 (fixed 28,800 baud, 8N1, RTS/CTS), TCP via a serial-to-Ethernet adapter or the SRS RGA Ethernet adapter |
| Protocol | SRS RGA command set: Operating Manual and Programming Reference, Models RGA100/200/300, Rev. 1.9, chapter 6 "Programming the RGA Head" |
| Status | 🧪 simulated: tested against a wire-level simulator, not yet verified on hardware. Report a hardware test |
uvx labmcp-srs-rga --simulate --check
uvx labmcp-srs-rga --simulate --option scenario=helium_leak # He pulses every 20 s for leak_check uvx labmcp-srs-rga --simulate --option scenario=overpressure # a growing leak trips the filament
The simulator is an RGA200 with a CDEM on an unbaked chamber at ~1e-7 Torr (mostly water, then H2, N2/CO, CO2).
uvx labmcp ports uvx labmcp-srs-rga --address /dev/ttyUSB0 --check # Linux
uvx labmcp-srs-rga --address /dev/tty.usbserial-XXXX --check # macOS uvx labmcp-srs-rga --address COM3 --check # Windows uvx labmcp-srs-rga --address tcp://192.168.1.50:4001 --check # raw-TCP serial-to-Ethernet adapter uvx labmcp-srs-rga --address tcp://192.168.1.50:818 --option user=admin --option password=admin --check # SRS RGA Ethernet adapter
On connection the server sends `ID?` and `IN0` (clear the RGA's buffers and run its hardware self-check). It does not switch anything on.
Claude Code
claude mcp add rga -- uvx labmcp-srs-rga --address /dev/ttyUSB0
Claude Desktop / Cursor / Windsurf (claude_desktop_config.json, .cursor/mcp.json, ...)
{
"mcpServers": { "rga": { "command": "uvx", "args": ["labmcp-srs-rga", "--address", "/dev/ttyUSB0"] } } }
Add --read-only to allow measurements but block switching the filament/CDEM, degassing, calibration and settings changes (the off switches stay available). For other clients, generate the snippet with uvx labmcp config srs-rga --address /dev/ttyUSB0 --client vscode (also cursor, codex, claude-code).
| Tool | Kind | Description |
|---|---|---|
all_off | 🛑 safety | Put the RGA in a safe state: abort any degas, CDEM off (HV0), filament off (FL0) and quadrupole RF/DC off (MR0). Use when finished, before venting, or if anything looks wrong. It interrupts a running scan or leak check, and every step is attempted even if an earlier one fails. |
analog_scan | 👁 read | Record an analog mass spectrum (SC1): the quadrupole steps through the mass range and the full peak shapes are returned (downsampled) with a peak list, the total pressure measured at the end of the scan, and optionally the full data as CSV. Use it to check peak positions and to survey unknown gases. Duration depends on the noise floor (e.g. 126 ms/amu at NF4). An existing save_path file is never overwritten. |
calibrate | ⚠️ hazard | Calibrate the detector: zero (CA) re-zeroes the ion detector at the present noise floor and detector and corrects the RF scan table for temperature drift (seconds); electrometer (CL) recalibrates the electrometer's full I-V response (longer, clears all zero offsets). The quadrupole RF is switched off at the end. |
cdem_off | 🛑 safety | Switch the electron multiplier off (HV0) and return to Faraday-cup detection. Always allowed, and it interrupts a running scan, mass measurement or leak check. |
degas | ⚠️ hazard | Start an ionizer degas (DG): 20 mA of 400 eV electrons clean the ion source by electron stimulated desorption. The CDEM is switched off and left off. Degassing shortens filament life; prefer a bakeout. Refused above max_filament_pressure_torr and beyond max_degas_minutes. Returns immediately; the RGA is busy until it finishes (any command would abort it), and filament_off / all_off stop it. |
filament_off | 🛑 safety | Switch the filament off (FL0), stopping a degas first if one is running. Always allowed, and it interrupts a running scan, mass measurement or leak check. |
get_command_log | 👁 read | Return the most recent raw commands sent to / replies received from the instrument (newest last). Useful for debugging and for recording what was done. |
get_connection_info | 👁 read | Report which instrument is connected (identity, address, simulated or real), whether the server is read-only, and the active safety limits. Call this first. |
get_status | 👁 read | Report the RGA state: filament emission, CDEM on/off and voltage, ionizer settings, scan settings, stored sensitivity factors, and the decoded error bytes (e.g. FL6 when the overpressure protection shut the filament down). Reading the error bytes clears the communication (EC?) and CDEM (EM?) error bytes, as on the instrument. |
histogram_scan | 👁 read | Record a bar-graph spectrum (HS1): one peak-locked value per integer m/z plus the total pressure. Faster than an analog scan and the usual way to follow a residual gas composition. |
identify_residual_gases | 👁 read | Run a histogram scan and assign the major peaks to likely gases with a simple lookup of standard 70 eV fragment patterns: H2 (2), He (4), CH4 (16/15), H2O (18/17), N2 or CO (28, split with 14 and 12), O2 (32), Ar (40), CO2 (44), plus diagnoses such as an air leak or hydrocarbon contamination. A screening aid, not a quantitative analysis. |
leak_check | 👁 read | Helium leak check: monitor m/z 4 while someone sprays helium on suspect joints, and report the baseline, every response above threshold_factor x baseline (start/end time, peak) and the time series. Keep the first few seconds free of helium so the baseline is clean. The response time of a real leak is a few seconds. Bounded by max_leak_check_duration_s. |
measure_masses | 👁 read | Measure partial pressures at a list of m/z values (peak-locked single-mass measurements, MR). Fast and precise for monitoring known gases; the precision and time per mass are set by the noise floor (set_scan_parameters). Pressures are N2-equivalent. |
read_total_pressure | 👁 read | Measure the total pressure with the RGA acting as an ionisation gauge (TP?, Faraday cup). Needs the filament on and the CDEM off. The value is N2-equivalent and can differ from a Bayard-Alpert gauge by a factor of a few, depending on the gas composition. |
reconnect | 🛑 safety | Close and re-open the connection to the instrument (e.g. after it was power cycled or a cable was re-plugged). |
set_cdem | ⚠️ hazard | Switch the electron multiplier (CDEM) on at a given high voltage for ~100-10000x more signal. High pressure shortens CDEM life and can destroy it, so this is refused unless the pressure is below max_cdem_pressure_torr (RGA total pressure measured now with the Faraday cup, a recent one, or external_pressure_torr), and the voltage is capped by max_cdem_voltage_v. Total-pressure readings are disabled while the CDEM is on. |
set_filament | ⚠️ hazard | Switch the filament on (or change its emission current). The filament burns out or is damaged above 1e-4 Torr, so this is refused unless the pressure is below max_filament_pressure_torr: pass external_pressure_torr from a separate gauge, or, if the filament is already on, the RGA's own total pressure is measured. The RGA's protection will also shut the filament down on overpressure (reported as FL6). |
set_scan_parameters | 🎛 control | Change measurement settings: noise floor (speed vs detection limit), electron energy, ion energy, focus plate voltage and analog-scan resolution. Sensitivity factors stored in the head are only valid at the default ionizer settings (70 eV, 12 eV, 90 V). After changing the noise floor the detector zero is re-adjusted automatically at the start of the next scan. |
get_connection_info, get_command_log and reconnect are built into every LabMCP server.
The RGA filament must only run below 1e-4 Torr, and a CDEM should never see voltage above 1e-4 Torr, with 5e-6 Torr or less recommended (manual: FL command warning p. 6-35, "CDEM Handling and Care" in the Maintenance chapter). The RGA only measures pressure while its filament emits, so switching on needs evidence:
set_filament and degas: the pressure must be at or below max_filament_pressure_torr. set_cdem: at or below max_cdem_pressure_torr, and the voltage at or below max_cdem_voltage_v (the hardware range of 10-2490 V is enforced as well).external_pressure_torr (a reading from another gauge that the user confirmed) and, when the filament is on and the CDEM off, a total-pressure measurement taken right then. If both are available, the higher one is checked, so a mistyped gauge value can't override what the RGA measures. With the CDEM on (the RGA can't measure), a reading from the last max_pressure_reading_age_s is accepted, but only while the filament is still on: once it is off (switched off or tripped) an older reading says nothing about the present pressure.get_status reports it.all_off, filament_off and cdem_off interrupt a running scan, mass measurement or leak check (which then returns an error and no data) instead of waiting for it to finish. all_off attempts every step even if one fails, and reports what failed.| Limit | Default | Meaning |
|---|---|---|
max_filament_pressure_torr | 1e-4 Torr | Highest pressure at which the filament may be switched on or the ionizer degassed |
max_cdem_pressure_torr | 5e-6 Torr | Highest pressure at which the CDEM may be switched on |
max_cdem_voltage_v | 2000 V | Highest CDEM high voltage (hardware maximum 2490 V) |
max_pressure_reading_age_s | 60 s | Oldest RGA total-pressure reading accepted as evidence (only while the filament stays on) |
max_degas_minutes | 3 min | Longest ionizer degas (hardware maximum 20 min) |
max_scan_duration_s | 900 s | Longest estimated analog/histogram scan |
max_leak_check_duration_s | 1800 s | Longest helium leak-check run |
Override at launch, e.g. --limit max_cdem_voltage_v=2400 --limit max_filament_pressure_torr=1e-5.